Free English MIDEA MVC-C1211S-BL (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MIDEA MVC-C1211S-BL (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the safety precautions when using the MIDEA MVC-C1211S-BL?
For safe operation of the MIDEA MVC-C1211S-BL, please observe the following:
Read the manual carefully before first use. Ensure the dust cup or dust bag is properly installed. Verify that your power supply is 220-240V~ 50/60Hz. Do not vacuum water, inflammable material, burning materials, or ashes. Do not operate the unit without the motor protection filter installed. Immediately replace the dust bag if it is damaged. Do not store or use the appliance near high temperature areas. Keep children away from the machine. If abnormal noise, smell, smoke, or failure occurs, turn off the switch, unplug the unit, and contact a service center for repair.
How do I connect the hose accessories to the MIDEA MVC-C1211S-BL?
To connect the hose accessories to the MIDEA MVC-C1211S-BL, insert the hose end into the hose socket at the front cover and then hook it.
How do I remove the hose accessories from the MIDEA MVC-C1211S-BL?
To remove the hose accessories from the MIDEA MVC-C1211S-BL, press the adaptors at both sides of the hose end and then pull the hose accessories out.
How do I use the nozzle tools with the MIDEA MVC-C1211S-BL?
Connect the plastic tube to the curved end of the hose. Then, connect different nozzle tools to the tube depending on your cleaning needs. For example, use the floor brush (adjusting it to the type of ground) for carpets or floors, and use the combine brush and nozzle for sofas, wall surfaces, curtains, corners, or spaces between furniture.
How do I turn on the MIDEA MVC-C1211S-BL and manage the power cord?
To turn on the MIDEA MVC-C1211S-BL, insert the plug into a power socket that conforms to the label for power supply and press the on/off switch pedal. For the cord, hold the plug to pull the cord out. To retract it, press the cord rewinding pedal so the power cord is drawn in.
How do I clean or change the dust bag on the MIDEA MVC-C1211S-BL?
When the wind indicator turns red or if you notice a loss of suction, it is time to empty the dust bag. Open the front cover by pressing the front cover locker, take out the bag, and empty it. You should wash the bag, or replace it with a new one if it is damaged.
How do I exchange the outlet filter on the MIDEA MVC-C1211S-BL?
To exchange the outlet filter on the MIDEA MVC-C1211S-BL, clip down and remove the outlet cover by hand to access and replace the filter.
What should I do if the MIDEA MVC-C1211S-BL malfunctions?
Please refer to the following troubleshooting table for the MIDEA MVC-C1211S-BL:
| Problem | Possible reason | Solution |
|---|---|---|
| The vacuum cleaner does not switch on | Too much dust in the bag; filter is blocked; brush duct is blocked; hasn’t been fully dried after washing | Empty the dust bag in time; clean the sponge filter; clean the blockage; dry the sponge filter in a cool place after washing |
| The machine does not work | The power plugs are loose on the socket or the power socket is not live; The switch fails to be opened | Inspect whether power plugs are tight or not or the socket is live or not; Press the switch button |
| The machine suddenly stops | The dust bag is full; The sponge filter is blocked; Suction inlet of brush or the other accessory is blocked | Empty the dust bag in time; clean the sponge filter; clean the blockage |
If the problem still cannot be solved, please contact the local service center.
CLICK HERE TO DOWNLOAD MIDEA MVC-C1211S-BL (01) PDF DOCUMENT