Free English MARTIN COLORFOX 100 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MARTIN COLORFOX 100 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the main controls located on the MARTIN COLORFOX 100 interface?
The controls on the MARTIN COLORFOX 100 are identified as follows:
- on/off button
- intensity button
- color button
- saturation button
- touch dial
- numbered presets
How do I use the basic lighting controls on the MARTIN COLORFOX 100?
To operate the basic lighting controls on the MARTIN COLORFOX 100, follow these steps:
1. Turn on the lights and then press the controller’s on/off button. If some lights do not turn on immediately, turn the controller off briefly.
2. Press I and turn the touch dial to adjust intensity.
3. Press C and turn the touch dial to adjust color.
4. Press S and turn the touch dial to adjust color saturation.
How do I know when the touch dial on the MARTIN COLORFOX 100 has reached the end of its range?
When the MARTIN COLORFOX 100 stops ticking, the touch dial has reached the end of its range.
How do I save a lighting design on the MARTIN COLORFOX 100?
Once you have created a lighting design that you like, you can save it by pressing and holding one of the four numbered preset buttons until the controller sounds and the lights flash. Your new settings replace those previously stored in the preset memory.
What does it mean if I hear an “eh-eh” sound when trying to save settings on the MARTIN COLORFOX 100?
If you hear an “eh-eh” sound, the save function has been disabled using pixmove.
How do I recall a saved design on the MARTIN COLORFOX 100?
To recall a design, simply press a preset button briefly.
How do I erase a design or restore a dynamic design on the MARTIN COLORFOX 100?
To erase a design, press and hold the preset button for four seconds until the controller sounds twice. This clears the button’s preset memory and restores the dynamic design.
How do I execute dynamic designs on the MARTIN COLORFOX 100?
Dynamic designs are lighting designs that change and are stored in the preset button memories. Press a preset button to execute a dynamic design. If there is no change, a static design has been saved in the button’s memory, and you must clear it to restore the dynamic design.
How do I adjust the speed or attributes of a dynamic design on the MARTIN COLORFOX 100?
Turning the touch dial changes the speed when the I, C, and S buttons are not lit. When these buttons are lit, they let you change the design’s intensity, color, and saturation.
How do I save or clear changes made to a dynamic design on the MARTIN COLORFOX 100?
Changes to a dynamic design can be saved by pressing and holding the preset button until the controller sounds once. Changes can be cleared by pressing and holding until the controller sounds twice.
What happens when I shut down the MARTIN COLORFOX 100?
Lights appear to turn off when you press the on/off button, but their power remains on until they are turned off at the switch. If a fixture has a remotely controllable lamp, the MARTIN COLORFOX 100 will attempt to turn it off two minutes after you press the on/off button. These lamps usually require a few minutes to cool down before they can be turned back on.
CLICK HERE TO DOWNLOAD MARTIN COLORFOX 100 (01) PDF DOCUMENT