Free English ALPINE RUE-4185 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ALPINE RUE-4185 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I use the Mute button on the ALPINE RUE-4185?
Press the button to lower the volume by 20 dB instantly. Press the button again to cancel.
How do I adjust the volume on the ALPINE RUE-4185?
To increase the volume level, press the Up arrow button.
To decrease the volume level, press the Down arrow button.
How do I operate the Power Switch on the ALPINE RUE-4185?
Press the switch to turn the power on/off.
What is the function of the Play/Pause button on the ALPINE RUE-4185?
Press the button to switch between the Play and Pause modes for the tape player or CD.
How do I use the CD Changer Button on the ALPINE RUE-4185?
Press the button to change to the CD changer operation.
What functions does the Band/Program Button perform on the ALPINE RUE-4185?
Radio mode: Acts as the BAND Button.
Tape mode: Acts as the Program Button.
How does the Up (Triangle) Button function on the ALPINE RUE-4185?
Radio mode: Pressing the button will select, in ascending order, stations programed into the radio’s presets as shown below: 1 -> 2 … 6.
Tape mode: Pressing this button enters the Program Sensor Up mode. This allows for music selection towards the end of the tape.
CD/CD Changer mode: DISC Select (UP) Button. Press the button to select a disc in ascending order.
Equalizer/Surround mode: After calling each mode with the A. PROC button, press the Up button to select each mode.
How does the Down (Triangle) Button function on the ALPINE RUE-4185?
Radio mode: Pressing the button will select, in descending order, stations programed into the radio’s presets as shown below: 6 -> 5 … 1.
Tape mode: Pressing this button enters the Program Sensor Down mode. This allows for music selection towards the beginning of the tape.
CD/CD Changer mode: DISC Select (DN) Button. Press the button to select a disc in descending order.
Equalizer/Surround mode: After calling each mode with the A. PROC button, press the Down button to select each mode.
What are the functions of the Rewind/Seek Down (Left Arrow) Button on the ALPINE RUE-4185?
Radio mode: SEEK (DN) Button
Tape mode: REW Button
CD/CD Changer mode: Press the button to go back to the beginning of the current track.
What are the functions of the Fast Forward/Seek Up (Right Arrow) Button on the ALPINE RUE-4185?
Radio mode: SEEK (UP) Button
Tape mode: FF Button
CD/CD Changer mode: Press the button to advance to the beginning of the next track.
How do I use the Audio Processor Button on the ALPINE RUE-4185?
Press the button to call the external audio processor mode.
Note: For the operation of external audio processor, refer to the Owner’s Manual of the external audio processor you purchased.
Note: This button is used in conjunction with an optional Ai-NET processor.
How do I use the Audio Select Button on the ALPINE RUE-4185?
Press to select the audio source.
What are the handling precautions for the ALPINE RUE-4185?
Do not drop or apply shock to the unit. It may get permanently damaged.
Keep the unit away from water and moisture, direct sun and heat, and excessive dust.
Never use scouring pads, steel wool, abrasive powders or harsh chemical agents, such as lye solution, for cleaning.
Clean with a soft, lint-free cloth or cotton swab slightly dampened with a mild solution of detergent and water.
Do not operate this unit in a manner that could distract you from driving safety.
How do I replace the battery in the ALPINE RUE-4185?
Applicable battery: Use two “AAA” sized dry batteries or equivalent.
1. Opening the battery cover: Slide out the battery cover while firmly pressing outward.
2. Replacing the battery: Put the batteries in the case as illustrated.
3. Closing the cover: Push the cover as illustrated until a click is heard.
What troubleshooting steps should I take if the ALPINE RUE-4185 Remote Control is inoperative?
| Problem | Cause | Solution |
|---|---|---|
| Remote Control Inoperative. | Reverse placement of battery. | Place the battery correctly into its cradle and back in the compartment. |
| Dead battery. | Replace the battery with a new one. | |
| Remote Control not pointed towards the head unit. | Point the unit directly toward your head unit. |
What are the specifications of the ALPINE RUE-4185?
| Battery Type | “AAA” sized dry battery |
| Battery Quantity | 2 |
| Dimensions (W x H x D) | 56mm (2-1/4″) x 14mm (9/16″) x 105mm (4-1/8″) |
| Weight (without battery) | 50 g (1 oz) |
CLICK HERE TO DOWNLOAD ALPINE RUE-4185 (01) PDF DOCUMENT