LOGITECH SIGNATURE SLIM COMBO MK950 (02) PDF Document

You have 2 options:

Option 1: Through the Logi Bolt receiver

Option 2: Through direct Bluetooth Low Energy (BLE) connection

STEP 1: Take the Logi Bolt receiver from the packaging tray that was holding your keyboard. IMPORTANT: Don’t remove the pull-tabs from your keyboard yet.

STEP 2: Insert the receiver into any available USB port on your desktop or laptop.

STEP 3: Now you can remove the pull-tabs from the keyboard and the mouse. The white LED on the first Easy-Switch key of the keyboard and mouse will start blinking.

STEP 4: Set the right keyboard layout for your computer operating system: Long press for 3 seconds the following shortcuts to set it up for Windows, macOS or ChromeOS.

IMPORTANT: Windows is the default OS layout. If you are using a Windows computer you can skip this step. Your keyboard and mouse are now ready to use.

Keyboard layout shortcuts:

STEP 1: Remove the pull-tabs from the keyboard and mouse. Both of them will automatically turn on. The white LED on the first Easy-Switch key of the keyboard and mouse will start blinking.

STEP 2: Open the Bluetooth settings on your device. Add a new peripheral by selecting your keyboard and mouse (Keyboard: Logi K950, Mouse: Logi M750) from your list of devices. Your keyboard and mouse will be paired once the LED stops blinking.

STEP 3: Your computer will require you to input a random set of numbers, please type them all and press the “Enter” key on your keyboard. Your keyboard is now ready to use.

There are 3 Easy-Switch keys each on your keyboard and the back of your mouse. Connect one device to each of them. When you go through the steps above, the first Easy-Switch key on the keyboard and mouse should be connected to one device already.

STEP 1: To connect to a second device, press the second Easy-Switch key for 3 seconds to put it on pairing mode. The LED light will start blinking.

STEP 2: Continue with any of the pairing methods above based on how you connected to your first device. Use the image on the left as an example, if you’ve connected your first device with a Logi Bolt receiver, your second device can be paired via Bluetooth®.

NOTE: Please be advised that you can use Bluetooth connection on all the Easy-Switch keys, but the Logi Bolt receiver can only be used in one of them.

Use the same process to pair an additional device to the third Easy-Switch key.

STEP 1: Remove the battery door from the bottom side of your keyboard. The dongle compartment is located next to the batteries.

STEP 2: Place your Logi Bolt receiver in the compartment and slide it to the right side of the compartment to secure it tight.

F-Row Keys (First section):

F-Row Keys (Second section):

Hot Keys:

Logi Bolt USB Receiver system requirements:

• Windows 11 or later
• macOS 11 or later
• Chrome OS
• Linux

Bluetooth Low Energy Wireless (BLE) Technology system requirements:

• Windows 11 or later
• macOS 11 or later
• iPadOS 14 or later
• iOS 14 or later
• Chrome OS
• Linux
• Android 9.0 or later

Signature Slim K950 for Business dimensions:

• Height: 134.8 mm (5.31 in)
• Width: 433.8 mm (17.08 in)
• Depth: 23.1 mm (0.91 in)
• Weight: 685 g (24.16 oz) with batteries

For MK950 Signature Plus M750 for Business dimensions:

• Height: 108.2 mm (4.26 in)
• Width: 61 mm (2.4 in)
• Depth: 38.8 mm (1.52 in)
• Weight: 101.3 g (3.57 oz) with batteries

For MK955 Signature Plus M750 L for Business dimensions:

• Height: 118.7 mm (4.67 in)
• Width: 66.2 mm (2.61 in)
• Depth: 42 mm (1.65 in)
• Weight: 115.4 g (4.07 oz) with batteries

USB-A Receiver dimensions:

• Height: 18.7 mm (0.74 in)
• Width: 14.4 mm (0.57 in)
• Depth: 6.1 mm (0.24 in)
• Weight: 1.7 g (0.06 oz)

Wireless technology:

• Logi Bolt USB-A receiver
• Bluetooth Low Energy (BLE) version: 5.1
• Wireless range: up to 10 m/33 ft (with an open line of sight)

Keyboard specifications:

• Battery: Alkaline, 2 x AAA batteries (included); up to 3 years
• Full-size layout with number pad
• On/Off power switch
• Tilt legs: 4° (default) or 8° typing angle
• LED lights: Caps Lock, Battery and Easy-Switch keys indicator lights
• Multi OS printed layout (Windows/Mac/Chrome)
• Easy-Switch Keys (connect up to 3 devices)

Mouse specifications:

• Battery: Alkaline, 1 x AA battery (included); up to 2 years.
• SmartWheel technology
• Contoured shape with rubber grips
• Number of buttons: 6 (Left/Right-click, Scroll-wheel with middle click, side buttons, DPI button)
• On/Off power switch
• LED lights: Battery indicator and Easy-Switch indicator lights

Sensor technology:

• Logitech Advanced Optical
• Nominal value: 1000 DPI
• DPI (Minimal and maximal value): 400-4000 DPI (can be set in increments of 100 DPI)

a. When the battery level is between 6% to 100%, the LED color will stay green.

b. When the battery level is below 6% (from 5% and below), the LED will turn into red. You can continue using your device for 1 month when the battery is low.

For Windows and macOS keyboard layout:

• If you are a Windows user, the special characters will be on the upper side of the key. NOTE: Windows layout is compatible with Linux and Android as well.
• If you are a mac user, the special characters and keys will be on the lower side of the keys. NOTE: macOS layout is compatible with iOS and iPadOS as well.

If you are a Chrome user, you will find one dedicated Chrome function, Launcher key, on top of the start key. Make sure you have selected the ChromeOS layout (FN+C) when you connect your keyboard to your device.