Free English LOGITECH PRO X SUPERLIGHT 2C (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOGITECH PRO X SUPERLIGHT 2C (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the package for the LOGITECH PRO X SUPERLIGHT 2C?
The package contains the following items:
1. Mouse
2. Optional grip tape
3. Receiver (installed in extension adapter)
4. USB charging and data cable
5. Surface preparation cloth
6. Optional POWERPLAY aperture door with PTFE foot
What are the features of the LOGITECH PRO X SUPERLIGHT 2C?
The features of the LOGITECH PRO X SUPERLIGHT 2C are:
1. Left Click
2. Right Click
3. Middle Click/Scroll
4. Browser Forward
5. Browser Back
6. Power LED
7. USB charging/data port
8. Power on/off
9. POWERPLAY Aperture door
How do I set up my LOGITECH PRO X SUPERLIGHT 2C?
Follow these steps to set up your mouse:
Step 1. Plug the charging/data cable into your PC.
Step 2. Plug the extension adapter and receiver into the charging/data cable.
Step 3. Turn on the LOGITECH PRO X SUPERLIGHT 2C.
How do I configure settings like DPI or report rate for my LOGITECH PRO X SUPERLIGHT 2C?
To configure mouse settings such as DPI or report rate for your LOGITECH PRO X SUPERLIGHT 2C, download the G HUB software.
How can I ensure optimal wireless performance for my LOGITECH PRO X SUPERLIGHT 2C?
For optimal wireless performance, use the LOGITECH PRO X SUPERLIGHT 2C within 20 cm of the receiver and at a distance greater than 2 m from sources of 2.4GHz interference, such as Wi-Fi routers.
How do I install the optional grip tape on my LOGITECH PRO X SUPERLIGHT 2C?
Step 1. Clean the surface of the mouse with the provided surface preparation cloth to remove any oil or dust.
Step 2. Carefully align the grip tape to the mouse surfaces and apply it.
How do I store the USB receiver inside my LOGITECH PRO X SUPERLIGHT 2C?
You can store the USB receiver inside the mouse by removing the POWERPLAY aperture door. This is useful for preventing the receiver from being lost when using the LOGITECH PRO X SUPERLIGHT 2C with the wireless charging system.
How do I install the optional aperture door with PTFE foot on my LOGITECH PRO X SUPERLIGHT 2C?
Removing the default POWERPLAY aperture door allows you to install the included optional aperture door with a PTFE foot on your LOGITECH PRO X SUPERLIGHT 2C.
CLICK HERE TO DOWNLOAD LOGITECH PRO X SUPERLIGHT 2C (01) PDF DOCUMENT