LOGITECH HARMONY (01) PDF DOCUMENT

The package for the LOGITECH HARMONY Smart Keyboard contains the following items:

1. Harmony Smart Keyboard: Enables text entry, navigation of computers, and control of home entertainment devices.

2. Harmony Hub: Controls devices via IR, Bluetooth, or included USB receivers.

3. 2 USB receivers: Enables text entry and navigation on compatible USB devices.

4. Power adapter: Provides power to the Harmony Hub.

5. IR mini blaster*: Extends IR coverage when used in combination with the Harmony Hub.

6. USB extender*: Helps to plug the USB receiver into hard-to-reach USB slots.

*Included in package, usage optional depending on setup.

The Harmony Hub is the center of your LOGITECH HARMONY system and should always be kept powered on. Its primary roles are:

• It receives commands from the keyboard and the smartphone app.

• It sends commands to your AV devices in the form of Bluetooth® and infrared (IR) signals, as well as through the USB receiver.

• It synchronizes all connected devices.

The LOGITECH HARMONY system works by using the Harmony Hub as a central controller. The Harmony App and Harmony Keyboard send commands to the Hub, which then translates and sends those commands to all your devices to keep them synchronized.

Harmony App: Provides universal remote control on your smartphone, allows customization of gestures and Favorites for each smartphone, and connects to the Harmony Hub via Wi-Fi.

Harmony Keyboard: Features integrated buttons to launch Harmony Activities, navigate DVR, control volume, and play media. It has an integrated touchpad for computer navigation and connects with the Harmony Hub via RF to send text and commands.

The LOGITECH HARMONY Hub uses several methods to control your devices:

Bluetooth enabled devices: The hub can connect with up to 3 Bluetooth enabled devices such as AppleTV®, Macs®, PS3®, and some PCs.

Infrared (IR) enabled AV devices: The hub emits standard infrared signals to control entertainment devices like your TV, cable/satellite box, AV receiver, etc. IR signals can reflect off walls and cabinet interiors, so a direct line of sight is generally not required.

IP enabled streaming devices: The hub can connect via Wi-Fi with devices such as Roku® that enable navigation and text entry via the same Wi-Fi network.

USB enabled devices: The included USB receivers can be plugged into any available USB port on computers, Xbox 360®, and PS3® devices to enable typing and navigation.

STEP 1: Position the Harmony Hub

• For devices on open shelves, place the hub on one of the shelves in an unobstructed location.

• For devices in a closed cabinet, place the hub inside the cabinet and the IR mini blaster on top to control your TV.

STEP 2: Power up your Harmony Hub

• Once plugged in, the hub takes approximately 30 seconds to power up.

STEP 3: Install the setup app

• Visit the Apple App Store or Google Play and install the Harmony App.

• Launch the app, select the “Setup New Remote” button, and follow the setup instructions.

Note: If you have an iPhone 4, iPad 1, iPad 2, or an Android device that does not support Bluetooth, please use a computer to connect the hub to your Wi-Fi network before beginning Step 3 of setup.

If your computer is Bluetooth compatible:

• Select ‘Bluetooth’ for your computer connection method during setup using the Harmony App.

• Start the Bluetooth pairing process on your computer to pair the Harmony Hub with your computer.

If your computer has an available USB port:

• Follow the onscreen instructions during setup.

• Power on your computer.

• Plug in one of the two included USB receivers when instructed to do so.

• Confirm the connection on the Harmony App.

AppleTV

• Power on your AppleTV.

• Select ‘Bluetooth connection’ for your AppleTV during setup.

• Start the Bluetooth pairing process on your AppleTV to pair the hub with your AppleTV.

Xbox 360

• Power on your Xbox.

• Plug in one of the two included USB receivers when instructed to do so.

• Select the connected USB receiver for your Xbox during setup.

• Confirm the connection on the Harmony App.

Roku

• Ensure Roku is powered on and connected to your home network.

• Select ‘Wi-Fi connection’ for your Roku during setup.

• The hub will scan your network for Roku and automatically connect to it once found.

PlayStation 3

• PlayStation 3 requires a Bluetooth connection to power on and off, and a USB connection for text entry and navigation.

• Power on your PlayStation.

• Follow instructions to connect via Bluetooth.

• Follow USB receiver connection instructions on the Harmony App.

1. Left Mouse Click: The top-left key functions as a left mouse click.

2. Harmony Activity Buttons: These provide one-touch access to computer-connected TV, Watch TV, and Watch a Movie Activities. The ‘Off’ button will turn off all devices used in the current Activity.

3. On/Off Switch: This switch turns the keyboard on or off.

4. Cable/Satellite Box Buttons: The Guide, DVR, and Menu buttons are used to access program guides, DVR recordings, etc.

5. Windows Key: This key also functions as the ‘Menu’ button on devices such as PS3 and Xbox, and as the Command key on Mac computers.

6. Color Keys: When used in combination with the Fn key, the color keys (V, B, N, M) can be used to navigate PS3, Xbox, and some cable/satellite box and DVR menus.

7. Page Up/Down Keys: When used in combination with the Fn key, these keys function as computer Page Up/Down or set-top box Channel Up/Down.

These older devices do not support Bluetooth LE, which is needed to enter Wi-Fi connection information on your hub. Specifically, Bluetooth LE for iOS and Bluetooth 3 or 4 for Android devices are required for setup.

The PlayStation requires a Bluetooth connection to power it on and off, while the USB receiver is used for text entry and navigation.

The keyboard and Harmony Hub can pair with a maximum of two USB receivers. To maximize the number of devices you can control, it is recommended to use Bluetooth pairing whenever possible.

Yes, but if you move the USB receiver to another device, you must return to the Harmony App to update your account with this change. This is necessary to keep the solution synchronized and working correctly.

• Make sure the Harmony Hub is powered on at all times.

• Make sure the power switch on the keyboard is in the ‘On’ position and ensure fresh batteries are inserted in the keyboard.

Make sure the device you are setting up is powered on.

• Ensure the hub is within range of your router.

• Ensure your phone and hub are connected to the same Wi-Fi network.

• Restart your hub by disconnecting and reconnecting its power supply. It will take 30 seconds to restart.