Free English LOGITECH G923 (01) PDF Document. Free English LOGITECH G923 (01) PDF User Guide. Free English LOGITECH G923 (01) PDF User Manual. Free English LOGITECH G923 (01) PDF Owner Guide. Free English LOGITECH G923 (01) PDF Owner Manual. Free English LOGITECH G923 (01) PDF Reference Guide. Free English LOGITECH G923 (01) PDF Instruction Guide. Free English LOGITECH G923 (01) PDF Reference Manual. Free English LOGITECH G923 (01) PDF Instruction Manual. Free English LOGITECH G923 (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD LOGITECH G923 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I connect the cables for my LOGITECH G923 Racing Wheel and Pedals?
To connect the cables for your LOGITECH G923, please follow these steps as shown in the connection diagram:
1. Connect the pedal unit cable to the corresponding port on the underside of the racing wheel base.
2. Connect the power adapter to the power port on the underside of the racing wheel base.
3. Plug the power cord into the power adapter and then into a wall outlet.
How do I mount the LOGITECH G923 racing wheel to a desk or table?
The LOGITECH G923 features a built-in clamping system for mounting to a surface.
1. To secure the wheel, push up on the clamp retainers to lock them into the mounting position.
2. Rotate the clamp knobs to tighten the clamps securely against your desk or table.
3. To release the wheel, rotate the clamp knobs to loosen them, then push down on the clamp retainers to unlock and retract the clamps.
How do I set up the LOGITECH G923 for use with a PlayStation 5 or PlayStation 4?
To connect your LOGITECH G923 to a PlayStation console:
1. Locate the platform selection switch on the top of the wheel base.
2. Set the switch to either PS5 for a PlayStation 5 or PS4 for a PlayStation 4.
3. Connect the attached USB cable from the racing wheel to an available USB port on your console.
How do I set up the LOGITECH G923 for use with a PC?
To connect your LOGITECH G923 to a PC:
1. Locate the platform selection switch on the top of the wheel base.
2. Set the switch to the PC position.
3. Connect the attached USB cable from the racing wheel to an available USB port on your PC.
4. For full functionality on a PC, you will need to download and install the necessary software.
CLICK HERE TO DOWNLOAD LOGITECH G923 (01) PDF DOCUMENT