LG MAGNIT LSAB012-T2 (01) PDF Document

The safety precautions are intended to prevent unexpected danger or harm. Please adhere to the following:

WARNING: If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION: If you ignore the caution message, you may be slightly injured or the product may be damaged.

WARNING: Indoor Use Only.

WARNING

• Before using an AC cable, make sure it conforms to the national standards.

• Operate the display only from a power source (i.e. voltage) indicated in the product specification. Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified installation company.

• Be sure to connect the AC cable to a grounded power disconnecting device. If you do not you may be electrocuted or injured or the product can be damaged.

• Insert the AC cable securely so that it does not come loose. Poor connection may cause a fire or electric shock.

• In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock.

• Be careful not to place heavy objects (electronic appliances, clothes, etc.) on or step on the AC cable. In addition, do not bend or pull the AC cable with excessive force. Damaged power cords may cause a fire or electric shock.

• Do not connect the AC cable to a power disconnecting device if it has been damaged by a sharp object. You may be electrocuted.

• If water or any foreign substance enters the product, disconnect the AC cable immediately and contact the service center. Otherwise, this may cause a fire or electric shock due to damage to the product.

• Keep the AC cable away from heating devices. The cord coating may melt and cause fire or electric shock.

• Never disassemble, repair, or modify the AC cable. This may cause a fire or electric shock.

• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

• For the power consumption to be zero, the AC cable must be disconnected.

CAUTION

• If there is dust on the AC cable or the power disconnecting device, wipe them clean. Overheating due to layers of dust may cause a fire or electric shock.

• If there is moisture on the AC cable or the power disconnecting device, wipe them clean. In addition, do not touch them if your hands are wet. This may cause an electric shock.

• Do not turn the product on or off by connecting or disconnecting the AC cable. In other words, do not use the AC cable as a switch. This may cause an electric shock or product malfunction.

• Do not disconnect the AC cable while using the product. Electrical shock can damage the product.

WARNING

• Contact the service center before moving the product. It may cause electric shock and damage the product.

• Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. You may be electrocuted or the product can be damaged.

• When moving the product, do not shock or cause an impact on the front panel. You may be electrocuted or the product can be damaged.

• Use the correct number of people according to the weight of the product. (Under 25 kg (55.1 lbs) per person use lifting equipment when exceeding 100 kg (220.4 lbs)). If use the damaged product again, contact the service center because it can cause electric shock or fire.

CAUTION

• Do not dispose of the product-packing box. Use it when moving by putting the product in the box to carry it.

WARNING

• Contact the service center before installing the product.

• Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product.

• Do not put heavy objects on, or hang from, the product.

• Install the product firmly fixed on a floor, wall, etc. to prepare against external impact.

• Do not install it where there are heating devices such as electrical heaters or lighting equipment.

• Do not install this product on a wall if it could be exposed to oil or oil mist.

• Safely install the product in a place that can hold the weight of the product.

• A readily accessible disconnect device shall be incorporated external to the equipment.

CAUTION

• Install the product where no Electromagnetic Interference occurs.

• If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance.

• Make sure the product is well ventilated by Installing at a distance (30 mm (1.1 inches) or more) from the wall.

• Do not install the product in an area with poor ventilation (e.g. on a bookshelf, in a closet) or outside and avoid placing on cushions or carpets.

• Install the product on a flat and stable place that is large enough to support the product.

WARNING

• Keep the product clean at all times. If it becomes covered in dust, it can cause fire or product damage.

• When you need to clean the inside of the product, you must contact the service center.

• When cleaning the product, disconnect the AC cable and wipe it gently with a soft cloth to prevent scratches.

• Do not physically come in contact with the screen of the LED Package.

• To clean the product, use an air gun to lightly remove dust from the front frame and the screen.

CAUTION

• When cleaning the product or the screen, unplug the power cord and wipe it gently with a soft cloth. Do not spray water or other liquids directly on the product. Especially, do not clean your product with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax, abrasive, thinner, benzene, alcohol, etc., which can damage the product or its panel.

WARNING

• Do not use the product in any environment with excessively high temperatures or humidity.

• If you use the product for a long period of time, take a rest from time to time to protect your vision.

• Listening at high volume or using for a long time can cause damage to your hearing.

• If water or any foreign substance enters a unit, turn off the unit, disconnect it from the AC cable, and contact the service center.

• In the event that no image appears on the screen or no sound is heard, stop using the product and disconnect the AC cable.

• Do not drop an object or impact on the product or screen.

• If there is smoke or a strange sound or smell, disconnect the AC cable and contact the service center.

• Do not attempt to disassemble, repair or modify the product yourself.

• Do not place objects filled with liquids such as vases, cups etc. on or over the product.

• Do not push hard on or scratch the product’s surface with your hands or sharp objects.

• Do not use high voltage electrical goods near the product (e.g., a bug zapper).

• Keep small accessories out of the reach of children.

• To shut off the power of the unit, you must disconnect all connected AC cables.

CAUTION

• This panel contains millions of pixels. You may occasionally see pixel spots. This is not a defect.

• Do not put or store inflammable substances near the product.

• Keep the proper distance from the product.

• Set the appropriate resolution and frequency.

• Take a regular break when working with the product for a long time.

1. When taking out the product, make sure the screen is not pressed.

2. To stand the product upright, hold it on both sides so that the LED package screen does not touch the floor.

3. Place the product with the LED package screen facing down. To protect the screen, lay the protective pad in the box on the floor.

4. If you do not have a pad, make sure that there is no foreign object on the floor when you lay the product on the floor, and then carefully place the LED package screen facing down or up. Be careful not to drop objects on the LED package screen.

CAUTION:

• If the product is tilted towards the LED package screen, the bottom of the product may be damaged.

• If the product is tilted towards the edge of the LED package screen, the bottom (corner) of the product may be damaged.

Temperature

• Make a cooling system for the enclosure so that the operating temperature of the product can be maintained.

• Product operating temperature: 0 °C to 40 °C (32 °F to 104 °F) (the recommended room temperature is below 25 °C (77 °F).)

• Install in a location where the warm air from an air conditioner does not directly affect the product.

Direct Sunlight

• Install in a location that is not exposed to direct sunlight. This will prevent the screen from appearing blurry due to light reflection.

Installation Position

• Ensure the distance from the ceiling of the installation room to the product is at least 400 mm (15.7 inches).

• Ensure the distance from the floor of the installation room to the product is at least 100 mm (3.9 inches).

Whether installing directly on a wall or in a recessed wall, the following clearances are recommended:

• A: 30 mm (1.1 inches) or more from the back of the screen to the wall (recommended).

• B: 25 mm (0.9 inches) or more from the sides of the screen to any adjacent surface.

• C: 60 mm (2.3 inches) or more from the top and bottom of the screen to any adjacent surface.

When installing a bezel, ensure it can be detached for product repair. For the top and bottom bezels, secure at least 60% of the air vent to facilitate air circulation and prevent malfunction.

If no image is displayed, check the following:

• Is the AC cable connected to the product?

– Make sure the AC cable is properly connected to the power disconnecting device.

• Is the ‘No Signal’ message displayed?

– There is no connection between the system controller (CSAB-0122D/CSAD) and the input source. Check the connection status of the LAN cable.

– Access the Input menu to check the input source.

• Does the ‘Invalid Mode’ message appear?

– Refer to the manual of CSAB-0122D/CSAD.

If the screen image looks abnormal, please check these points:

• Is the screen position wrong?

– Refer to the manual of the system controller (CSAB-0122D/CSAD).

• The screen is displayed abnormally.

– The proper input source is not connected to the port. Connect a cable that matches the input source signal.

• The screen flickers or shakes.

– Check if the system controller (CSAB-0122D/CSAD) is powered off.

If you experience issues with the display color, consider the following:

• Screen has poor color resolution (16 colors).

– Refer to the manual of the system controller (CSAB-0122D/CSAD).

• The screen color is unstable or looks black and white.

– Refer to the manual of the system controller (CSAB-0122D/CSAD).

• Does a black dot appear on the screen?

– The few pixels (red, green, blue, white and black) that appear on the screen are due to the inherent characteristics of the LED surface. This is not a malfunction of the Screen.

If the operation does not work normally, check the following:

• The power suddenly turned off.

– Refer to the manual of the system controller (CSAB-0122D/CSAD).