LG 86UK6570PUA (01) PDF Document

To ensure the safe operation of your LG 86UK6570PUA, please adhere to the following instructions:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement.

• Protect the power cord from being walked on or pinched, particularly at plugs and convenience receptacles.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a compatible cart, stand, tripod, bracket, or table. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

To prevent fire, electric shock, malfunction, or product deformation, do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity, such as a bathroom.

• Near any heat source, such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases or cups, on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Proper ventilation is crucial for the safe operation of your TV. Follow these guidelines:

• Install your TV where there is proper ventilation. Do not install it in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• When mounting on a table or wall, ensure there is a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

Power Cord:

• Protect the power cord from physical or mechanical abuse. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV while the power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Grasp the plug when unplugging the power cord. Do not pull on the cord itself.

• Do not connect too many devices to the same AC power outlet.

Batteries:

• Store accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire.

• Do not mix new batteries with old batteries.

Cleaning:

• When cleaning, unplug the power cord and wipe gently with a soft/dry cloth.

• Do not spray water or other liquids directly on the TV.

• Do not clean your TV with chemicals including glass cleaner, air freshener, insecticide, lubricants, wax, abrasive, thinner, benzene, alcohol, etc., as these can damage the product and/or its panel.

You should unplug the product immediately and contact your local customer service if any of the following occur:

• The product has been damaged.

• Water or another substance enters the product (like an AC adapter, power cord, or TV).

• You smell smoke or other odors coming from the TV.

• During lightning storms or when the TV is unused for long periods of time.

• When the TV is turned on for the first time, its initialization may take approximately one minute.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in the manual.

• The available menus and options may differ from the input source or product model you are using.

• The device must be easily accessed to a location outlet near the access.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) wide.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

When moving or lifting the TV, read the following to prevent it from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• Use at least two people to move a large TV.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn the TV on its side or tilt it towards the left or right.

• Avoid touching the screen at all times, as this may result in damage.

• Do not place the product on the floor with its front facing down without padding.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Note: Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. If you install the TV on a stand, you need to take actions to prevent the product from overturning.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Make sure to use screws and a wall mount bracket that meet the VESA standard. The specifications for your model are as follows:

To access the setting, go to HOME → Settings (Gear Icon) → Picture → Additional Settings → HDMI ULTRA HD Deep Color.

• On: Supports 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0).

• Off: Supports 4K @ 60 Hz 8 bit (4:2:0).

If the device connected to the Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Color setting to off.

You can simply operate the TV functions using the button on the unit.

Basic Functions:

• Power On: Press the button.

• Power Off: Press and Hold the button. All running apps will close.

• Menu Control: Press the button when the TV is on to access the menu.

• Menu Selection: Press and Hold the button when you access menu control.

Adjusting the Menu (when TV is on):

When the TV is turned on, press the button one time to open the adjustment menu. You can adjust the items using the button:

• Turns the power off.

• Changes the input source.

• Scrolls through the saved channels.

• Adjusts the volume level.

How to register the Magic Remote Control:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

• Check if anything, such as tape, has been placed over the receiver on the TV.

• Check if there is any obstacle between the product and the remote control.

• Replace the batteries with new fresh ones.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

• If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with the TV.

• Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance.

• Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for an extended length of time.

• Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

Broadcasting Specifications

Wireless module (LGSBWAC72) Specifications

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory.

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

You can connect an external control device like a computer or A/V control system to control the TV’s functions externally.

USB to Serial converter with USB Cable:

• Connect the USB to Serial converter to the USB IN port on the TV. The LGTV supports PL2303 chip-based converters.

RS-232C With RS232C Cable (D-Sub 9pin Type):

• You need to purchase an RS-232C (DE9, D-Sub 9pin female-to-female type) cable.

• Connect the cable from your PC’s serial port to the RS-232C IN (CONTROL & SERVICE) port on the TV.

Phone jack Type:

• For some models, you need to purchase a phone-jack to RS-232 cable for the connection.

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.

(* Depending on model)

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Use a crossed (reverse) cable.

The transmission protocol follows this format:

[Command1][Command2][ ][Set ID][ ][Data][Cr]

• [Command 1]: First command to control the TV (j, k, m or x).

• [Command 2]: Second command to control the TV.

• [Set ID]: The desired monitor ID number from 1 to 99 (Hexadecimal 0x00 to 0x63). If ‘0’ is selected, every connected set can be controlled.

• [Data]: The command data in hexadecimal. Transmit ‘FF’ to read the status of a command.

• [Cr]: Carriage Return (ASCII code ‘0x0D’).

• [ ]: Space (ASCII code ‘0x20’).

OK Acknowledgement:

[Command2][ ][Set ID][ ][OK][Data][x]

Error Acknowledgement:

[Command2][ ][Set ID][ ][NG][Data][x]