LG 86UK6570PUB (01) PDF Document

To ensure safe operation of your LG 86UK6570PUB television, please follow these instructions:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

To reduce the risk of fire and electric shock, follow these warnings:

• Do not expose this product to rain or moisture.

• To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

• Do not place the TV and/or remote control in environments such as: away from direct sunlight, in areas with high humidity like a bathroom, near heat sources, near kitchen counters or humidifiers, exposed to rain or wind, or in excessively dusty places.

• Do not expose the TV to dripping or splashing and do not place objects filled with liquids, such as vases or cups, on or over the apparatus.

Proper ventilation is crucial for the safe operation of your LG 86UK6570PUB TV.

• Install your TV where there is proper ventilation. Do not install it in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• When installing on a table, leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV while the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

When moving your LG 86UK6570PUB TV, please follow these guidelines to prevent damage and ensure safety:

• Make sure the product is turned off, unplugged, and all cables have been removed.

• It may take 2 or more people to carry a large TV like the LG 86UK6570PUB.

• Do not press or put stress on the front panel of the TV.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

• When transporting the TV by hand, hold it as shown in the illustrations in the manual.

• Avoid exposing the TV to jolts or excessive vibration.

• Keep the TV upright; never turn it on its side or tilt it towards the left or right.

• Be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

To clean your LG 86UK6570PUB TV, follow these steps:

1. Unplug the power cord.

2. Wipe gently with a soft, dry cloth.

3. Do not spray water or other liquids directly on the TV.

4. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel.

5. When cleaning, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the guide panel.

6. Make sure to wring any excess water or cleaner from the cloth. Do not spray directly onto the screen. Spray just enough water or cleaner onto a dry cloth to wipe the screen.

For an optimal connection with your LG 86UK6570PUB, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) wide. It is also recommended to use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

The wall mount specifications for the LG 86UK6570PUB are as follows:

Make sure to use screws and a wall mount bracket that meet the VESA standard. It is recommended that you use an LG brand wall mount. When mounting, ensure the device is adequately secured to a solid wall with enough space to allow connectivity to external devices.

To prevent your LG 86UK6570PUB from falling over, you can secure it to a wall. Brackets, bolts, and ropes are not provided but can be obtained from your local dealer.

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Ensure you use a platform or cabinet that is strong and large enough to support the TV securely.

The HDMI audio formats supported by the LG 86UK6570PUB (depending on model) are:

• DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz)

• DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

• True HD (48 kHz)

• Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz)

• PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

To enable HDMI ULTRA HD Deep Color for clearer 4K picture quality, navigate to Settings → Picture → Additional Settings → HDMI ULTRA HD Deep Color. You can then turn it on for the desired HDMI port.

• On: Supports 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

• Off: Supports 4K @ 60 Hz 8 bit (4:2:0)

If the device connected to the input port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the setting to off.

You can operate the TV’s basic functions using the button on the TV itself.

Basic Functions:

• Power On: Press the button.

• Power Off: Press and hold the button.

• Menu Control: Press the button when the TV is on.

• Menu Selection: Press and hold the button to select a menu item.

Adjusting the Menu:

When the TV is on, press the button once to access the menu. You can then adjust the menu items by pressing the button to cycle through the options:

• Power Off: Turns the power off.

• Input Source: Changes the input source.

• Channels: Scrolls through the saved channels.

• Volume Level: Adjusts the volume level.

How to register the Magic Remote Control:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

If the remote control is not working with your TV, please try the following troubleshooting steps:

• Check if anything, such as tape, has been placed over the receiver on the TV.

• Check if there is any obstacle between the TV and the remote control.

• Replace the batteries with new fresh ones.

If there is no picture or sound, please check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

If your TV turns off by itself, it could be due to the following reasons:

• Check the power control settings. The power supply may have been interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

• Flicker: If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal and there is nothing wrong with the TV.

• Dot Defects: Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Image Sticking: Displaying a still image for a prolonged period may cause image sticking (burn-in). Avoid displaying a fixed image on the TV screen for an extended length of time.

Certain sounds from your TV are normal and do not indicate a malfunction:

• Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

The LG 86UK6570PUB uses the LGSBWAC72 wireless module with the following specifications:

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.

The symbols on the product have the following meanings:

• ~ : Refers to alternating current (AC).

• — : Refers to direct current (DC).

• ▢ : Refers to class II equipment.

• ⏻ : Refers to stand-by.

• | : Refers to “ON” (power).

• ⚡︎ : Refers to dangerous voltage.

To ensure child safety, proper television placement is crucial. Many injuries, particularly to children, can be avoided by taking simple precautions:

• ALWAYS follow the manufacturer’s recommendations for safe installation.

• ALWAYS use cabinets, stands, or mounts recommended by the manufacturer that can safely support the television set.

• NEVER allow children to climb on or play on the television or the furniture on which it is placed.

• NEVER place the television on furniture that can be easily used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over, or knocked down.

• ALWAYS route cords and cables so they cannot be tripped over, pulled, or grabbed.

• Ensure the television is not overhanging the edge of the supporting furniture.

• If moving an older CRT television to a new place in your home, place it on furniture that is sturdy and appropriate for its size and weight.