LG 75QNED93 (01) PDF Document

The model and serial number of your LG 75QNED93 TV are located on the back and on one side of the product. It is recommended to record them in case you ever need service.

For more detailed information about your LG 75QNED93 TV, you can read the USER GUIDE that is embedded in the product. To open it, press the button on your remote control, then navigate to [Support] and select [User Guide].

To ensure safety when using your LG 75QNED93 TV, please follow these instructions:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

FIRE PREVENTION: TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

Do not place the LG 75QNED93 TV or its remote control in the following environments to prevent fire, electric shock, combustion/explosion, malfunction, or product deformation:

• An area exposed to direct sunlight.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area with high humidity such as a bathroom.

• Near flammable objects such as gasoline or candles.

• An area exposed to rain or wind.

• An area that may be exposed to water droplets or splashes. Do not place items containing liquid (vases, cups, etc.) on top of the device.

• An area that may be directly exposed to air conditioner airflow.

• An area with excessive dust.

Please adhere to the following ventilation guidelines for your LG 75QNED93 TV:

• Install the device where there is proper ventilation.

• Do not install it in a confined space such as a bookcase.

• Do not install the device on a carpet or cushion.

• Do not block or cover the device with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Follow these safety measures regarding the power cord for your LG 75QNED93 TV:

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• Make sure the power cord is connected securely to the TV and wall socket. If not secured, damage to the plug and socket may occur, and in extreme cases, a fire may break out.

• Do not touch the end of the power cord while it is plugged in, as you may be electrocuted.

• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

If any of the following occur with your LG 75QNED93 TV, unplug the product immediately and contact your local customer service:

• The product has been damaged.

• Water or another substance enters the product (like an AC adapter, power cord, or TV).

• You smell smoke or other odors coming from the TV.

• During lightning storms or when the TV is unused for long periods of time.

Even if the TV is turned off by remote control or button, the AC power source is still connected to the unit if not unplugged.

Please follow these safety precautions for batteries:

• Store accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

• Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

When cleaning your LG 75QNED93 TV, unplug the power cord and wipe gently with a soft/dry cloth.

• Do not spray water or other liquids directly on the TV.

• Do not clean your TV with chemicals such as glass cleaner, air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the device and/or its panel. This may result in electric shock or device damage.

• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it, as it may cause damage to the screen.

Please note the following advice to prevent the LG 75QNED93 TV from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• Do not expose the TV to jolts or excessive vibration during transport.

• When transporting the TV, keep it upright; never turn it on its side or tilt it towards the left or right.

• Do not apply excessive pressure that may cause flexing or bending of the frame chassis, as it may damage the screen.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

• When attaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect it from scratches.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Important Notes:

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product, as this may cause damage.

• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

• When assembling the stand, ensure that all of the provided screws are attached. If the screws are not fully tightened, the product may tilt or tip over.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Attach an optional wall mount bracket at the rear of the TV carefully and install it on a solid wall perpendicular to the floor. LG recommends that wall mounting be performed by a qualified professional installer.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket, fix it carefully so as not to drop.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist, as this may damage the product and cause it to fall.

You should buy a suitable wall mount kit in the market by referring to this table for your model.

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

You can operate the TV functions using the button located on the TV set.

• Power On: Press the button once.

• Power Off: Press and hold the button. All running apps will close, and any recording in progress will stop.

• Menu Control: Press the button when the TV is on to access and adjust the menu.

• Menu Selection: Press and hold the button when you access menu control to select a function.

Note: If the TV is turned on for the first time after it was shipped from the factory, initialization may take a few minutes. The device must be easily accessed at a location outlet near the access.

When connecting an HDMI cable, the LG 75QNED93 TV and external devices should be turned off and unplugged.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• The recommended HDMI cable type is an Ultra High Speed HDMI®/™ cable (3 m or less).

• If the device connected to the Input Port also supports HDMI Deep Colour, your picture may be clearer. If the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Colour] setting to off.

Yes, please consider the following when connecting external devices like Blu-ray players, PCs, or gaming devices to your LG 75QNED93 TV:

• The external device connection may differ from the model.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate, or adjust the brightness and contrast on the [Picture] menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

• If Ultra HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance.

• When connecting to a wired LAN, use a CAT 7 cable with high-speed Internet transmission (only when a LAN port is provided).

• Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

The specifications for the LG 75QNED93 TV are as follows:

Power Requirement

Broadcasting Specifications

Environment Condition

For information on power supply and power consumption, refer to the label attached to the product.

If the remote control is not working with your LG 75QNED93 TV, try the following steps:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed.

If there is no image or sound, please check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

If your LG 75QNED93 TV turns off by itself, check these settings:

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings related time. This product is equipped with an auto-off function that automatically turns off the power if the remote control is not used for 15 minutes without an input signal.

If you see a “no signal” message when your PC is connected via HDMI, try these steps:

• Turn the TV off and on again using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal and there is nothing wrong with the product.

• The panel is an advanced product containing millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue, or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• You may find different brightness and colour of the panel depending on your viewing position (left/right/top/down). This phenomenon occurs due to the characteristic of the panel and is not a malfunction.

• Displaying a still image for a prolonged period may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate the product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

Press the (Back) and (Home) buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Alternatively, press and hold the (Home) and (Q. Settings) buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

The “Always Ready” feature allows you to operate the TV and connect to Bluetooth with direct voice recognition while the power is off.

• To enable it, go to → [General] → [Always Ready], and set [Enable the function] to on.

• Pressing the power button while watching TV switches the screen to [Always Ready] mode. Pressing it again turns the screen off while keeping it in [Always Ready] mode.

• To exit [Always Ready] and watch TV, press the (Home) button or the (Back) button.

• To display a wallpaper when in [Always Ready] mode with the screen off, press the Wheel (OK) button. Press the power button to return to watching TV.

Note: Using Always Ready may increase energy consumption.