LG 75QNED92 (01) PDF Document

For more information about your LG 75QNED92 TV, you can read the USER GUIDE embedded in the product. To open the USER GUIDE, press the settings button on your remote, then navigate to [Support] and select [User Guide].

To reduce the risk of electric shock, do not remove the cover or back of the TV. There are no user-serviceable parts inside. Refer servicing to qualified personnel.

To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.

To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

Do not place the LG 75QNED92 TV and/or its remote control in the following environments to avoid fire, electric shock, combustion/explosion, malfunction, or product deformation:

• An area exposed to direct sunlight.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area with high humidity, such as a bathroom.

• Near flammable objects such as gasoline or candles.

• An area exposed to rain or wind.

• An area that may be exposed to water droplets or splashes.

• An area directly exposed to air conditioner airflow.

• An area with excessive dust.

• Do not place items containing liquid (vases, cups, etc.) on top of the device.

• Install the device where there is proper ventilation. Do not install in a confined space such as a bookcase.

• Do not install the device on a carpet or cushion.

• Do not block or cover the device with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• Make sure the power cord is connected securely to the TV and wall socket. If not secured, damage to the plug and socket may occur, and in extreme cases, a fire may break out.

• Do not touch the end of the power cord while it is plugged in, as you may be electrocuted.

• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

If any of the following occur, unplug the product immediately and contact your local customer service:

• The product has been damaged.

• Water or another substance enters the product (like an AC adapter, power cord, or TV).

• You smell smoke or other odors coming from the TV.

• During lightning storms or when the TV is unused for long periods of time.

• Store the accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

• Caution: There is a risk of fire or explosion if the battery is replaced by an incorrect type.

• When you clean the device, unplug the power cord and wipe gently with a soft/dry cloth.

• Do not spray water or other liquids directly on the device.

• Do not clean the device with chemicals such as glass cleaner, air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the device and/or its panel. This may result in electric shock or device damage.

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• When transporting the TV, keep it upright; never turn it on its side or tilt it towards the left or right.

• Do not apply excessive pressure to cause flexing/bending of the frame chassis as it may damage the screen.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

1. Lift and tilt the TV into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation.

2. Connect the power cord to a wall outlet.

Important Notes:

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product, as this may cause damage.

• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

• Do not use any unapproved items to ensure safety and product life span. Any damage or injuries caused by using unapproved items are not covered by the warranty.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted in the eye-bolt position, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note: Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Attach an optional wall mount bracket at the rear of the TV carefully and install it on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel.

• LG recommends that wall mounting be performed by a qualified professional installer.

• Use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.

• It is advised to connect all the cables before installing fixed wall mounts.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

The specifications for mounting the LG 75QNED92 are as follows:

• Model: 75QNED92*, 75QNED93*

• VESA (A x B) (mm): 400 x 400

• Standard screw: M6

• Number of screws: 4

• Wall mount bracket (optional): Buy a suitable wall mount kit in the market by referring to this table for your model.

Antenna/Cable:

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

Satellite Dish:

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on model)

You can operate the TV functions using the single button on the TV set.

• Power On: Press the button.

• Power Off: Press and hold the button. All running apps will close, and any recording in progress will stop.

• Menu Control: Press the button when the TV is on to access and adjust the menu.

• Menu Selection: Press and hold the button when you access menu control to select a function.

HDMI:

• When connecting an HDMI cable, the TV and external devices should be turned off and unplugged.

• Use a certified cable with the HDMI logo attached. An Ultra High Speed HDMI®/™ cable (3 m or less) is recommended.

• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• If a connected device supports HDMI Deep Colour, your picture may be clearer. If the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Colour] setting to off. (Path: Settings → [General] → [External Devices] → [HDMI Settings] → [HDMI Deep Colour])

USB:

• Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm wide. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

Power Requirement

AC 100-240 V ~ 50/60 Hz

Broadcasting Specifications

• Television system: Terrestrial / Cable / Satellites Digital TV

• External antenna impedance: 75 Ω

Environment Condition

• Operating Temperature: 0 °C to 40 °C

• Operating Humidity: Less than 80 %

• Storage Temperature: -20 °C to 60 °C

• Storage Humidity: Less than 85 %

For information on power supply and power consumption, refer to the label attached to the product.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed (positive to positive, negative to negative).

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated on the settings related time.

• This product is equipped with an auto-off function that automatically turns off the power if the remote control is not used for 15 minutes without an input signal.

• Turn the TV off and on again using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

• Flickering: If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal; there is nothing wrong with the product.

• Pixel Dots: This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue, or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• Viewing Angle: You may find different brightness and colour of the panel depending on your viewing position (left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related to product performance and is not a malfunction.

• Image Sticking: Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

To register the Magic Remote:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

To deregister the Magic Remote:

Press the (Back) and (Home) buttons at the same time for five seconds to unpair the Magic Remote with your TV.

To disconnect and re-register the Magic Remote at the same time, press and hold the (Home) and (Q. Settings) buttons for more than 5 seconds.

• Power: Turns the TV on or off.

• Home Hub: Accesses the [Home Hub] or changes the input source.

• Home: Accesses the Home menu or activates the screen zoom function.

• Wheel (OK): Press the center to select a menu. Use the wheel to change programmes.

• Up/Down/Left/Right: Scrolls the menu.

• Back: Returns to the previous level or closes the TV screen display and shows the home menu.

• Volume buttons: Adjusts the volume level or mutes all sounds.

• Microphone: Used for voice recognition.

• Accessibility: Accesses the [Accessibility] app or shortcuts.

• GUIDE: Accesses the [Guide].

• LIST: Accesses the saved programmes list.

• AI: Used for voice recognition function and to check for recommended content.

• More actions: Displays more remote control functions.

• AD/SAP: Enables audio descriptions.

• Q. Settings: Accesses the Quick Settings or All Settings menu.

• Programme buttons: Scrolls through saved programmes.

• Various services button (1): Connects to various services such as streaming and voice search.

• Power: Turns the TV on or off.

• Number buttons (0-9): Enters numbers.

• LIST (press and hold 0): Accesses the saved programmes list.

• QUICK ACCESS (press and hold number): Accesses the [Edit Quick Access] feature.

• More actions (…): Displays more remote control functions.

• Volume buttons: Adjusts the volume level.

• Programme buttons: Scrolls through the saved programmes.

• Mute: Mutes all sounds or accesses [Accessibility Shortcuts].

• Home: Accesses the Home menu or activates the screen zoom function.

• AI button: Use for voice recognition and checking recommended content.

• Wheel (OK): Press the center to select a menu. Use the wheel to change programmes.

• Up/Down/Left/Right: Scrolls the menu.

• Back: Returns to the previous level or closes the on-screen display.

• Home Hub: Accesses the [Home Hub] or changes the input source.

• Q. Settings: Accesses the Quick Settings or All Settings menu.

• Colored buttons (Red, Green, Yellow, Blue): Access special functions in some menus. Red button runs the record function.

• Various services button (1): Connects to various services such as streaming and voice search.

• AD/SAP: Enables audio descriptions function.

• Power: Turns the TV on or off.

• TEXT / T.OPT: Used for teletext.

• GUIDE: Accesses the [Guide] or the saved programmes list.

• QUICK ACCESS: Accesses [Edit Quick Access].

• Volume buttons: Adjusts the volume level.

• Programme buttons: Scrolls through the saved programmes.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• Back: Returns to the previous level or closes the on-screen display.

• Input: Changes the input source or accesses the [Home Hub].

• AD (press and hold 1): Enables audio descriptions.

• Q. Settings: Accesses the Quick Settings or All Settings menu.

• Number buttons (0-9): Enters numbers.

• 9 (press and hold): Accesses the [Quick Help].

• More actions (…): Displays more remote control functions or enables audio descriptions.

• Mute: Mutes all sounds or accesses [Accessibility Shortcuts].

• Search (Q): Checks for recommended content or searches for content.

• Control buttons (play, pause, etc.): Control buttons for media contents.

• Colored buttons: Access special functions in some menus. Red button runs the record function.

• Various services button (2): Connects to various services such as streaming.

• Home Hub (2): Accesses the [Home Hub].

• User Guide (2): Accesses the [User Guide].

• FAV (2): Accesses your favourite programme list.

• Home: Accesses the Home menu or activates the screen zoom function.