Free English LG 49SL5E (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LG 49SL5E (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I connect the power cord to my LG 49SL5E?
To connect the power cord to your LG 49SL5E, please follow these steps:
1. Securely plug the power cord into the power input port on the back of the monitor.
2. Plug the other end of the power cord into a wall outlet.
How do I install or replace the batteries in the remote control for the LG 49SL5E?
Please follow these steps to install the batteries:
1. Press the top of the battery cover on the back of the remote and slide it downwards to remove it.
2. Insert two AAA batteries into the compartment. Make sure to match the positive (+) and negative (-) ends of the batteries with the labels inside the compartment.
3. Slide the battery cover back into place until it clicks shut.
How do I turn on the LG 49SL5E?
You can turn on your LG 49SL5E monitor using one of two methods:
1. Press the power button located on the bottom edge of the monitor.
2. Aim the remote control at the sensor on the monitor and press the power button.
What are the available input and output ports on the LG 49SL5E?
The LG 49SL5E is equipped with the following connection ports:
Inputs:
– HDMI IN (x2)
– DVI-D IN
– RGB IN
– AUDIO IN
– RS-232C IN
– LAN (for network connection)
– USB
– EXT IR IN
Outputs:
– HDMI OUT
– DVI OUT
– RGB OUT
– AUDIO OUT
– RS-232C OUT
How can I connect a PC or other video source to the LG 49SL5E?
You can connect a video source to your LG 49SL5E using one of the following methods:
HDMI: Connect an HDMI cable from the HDMI output of your device to one of the HDMI IN ports on the monitor.
DVI: Connect a DVI cable from the DVI output of your device to the DVI-D IN port on the monitor.
RGB (VGA): Connect an RGB cable from the RGB output of your PC to the RGB IN port on the monitor. For audio, you must also connect a separate audio cable from your PC’s audio out to the AUDIO IN port on the monitor.
How do I connect an external audio system to the LG 49SL5E?
To connect external speakers or an amplifier, use an audio cable to connect the AUDIO OUT port on the monitor to the audio input port on your external audio device.
How can I connect my LG 49SL5E to a wired network?
To connect your LG 49SL5E to a wired network, plug one end of a LAN (Ethernet) cable into the LAN port on the back of the monitor and the other end into your router or a network wall outlet.
Is it possible to connect multiple LG 49SL5E monitors together (daisy-chain)?
Yes, you can daisy-chain multiple monitors. To do this, connect a cable from an output port of the first monitor to the corresponding input port of the next monitor. For example:
– Connect a DVI cable from the DVI OUT of the first monitor to the DVI-D IN of the second monitor.
– Connect an RS-232C cable from the RS-232C OUT of the first monitor to the RS-232C IN of the second monitor for control signals.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD LG 49SL5E (02) PDF DOCUMENT