LG 49SL5PE (02) PDF Document

The items included with your LG 49SL5PE may vary depending on the country. Generally, you can expect to find the following:

• Monitor Signage

• Remote Control

• AAA Batteries

• Power Cord

• RS-232C Cable

• DVI to HDMI Cable

• Software CD

To connect the power cord to your LG 49SL5PE, please follow these steps:

1. Securely plug one end of the power cord into the power input port on the back of the monitor.

2. Plug the other end of the power cord into a grounded wall outlet.

The OPS DC Power specifications for the LG 49SL5PE are as follows:

13.2 V – 2.65 A / 2.65 A

(13.2 V – 5.3 A)

To install the batteries in the remote control for your LG 49SL5PE, follow these four steps:

1. Press the top of the battery cover on the back of the remote and slide it downwards to open.

2. Insert two AAA batteries into the compartment, making sure to match the positive (+) and negative (-) ends to the labels inside.

3. Slide the battery cover back into place until it clicks shut.

You can turn on your LG 49SL5PE using one of two methods:

1. Press the power button located on the bottom edge of the monitor.

2. Aim the remote control at the sensor on the monitor and press the power button on the remote.

The LG 49SL5PE is equipped with the following input and output ports for various connections:

Video/Audio Inputs:

• HDMI IN 1

• HDMI IN 2

• DVI-D IN

• RGB IN

• AUDIO IN (3.5mm, associated with RGB/DVI)

• AUDIO IN (3.5mm, alternate)

Video/Audio Outputs:

• HDMI OUT

• AUDIO OUT (3.5mm)

Control/Data Ports:

• RS-232C IN

• RS-232C OUT

• LAN (Network)

• USB (5V 1.0A)

• EXT IR IN (for external remote sensor)

• IO OUT