Free English LG 49SH7PE (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LG 49SH7PE (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What items are typically included with the LG 49SH7PE?
The LG 49SH7PE typically comes with the monitor itself, a remote control with AAA batteries, a power cord, an RS-232C cable, and a software CD. Please note that the included accessories may vary depending on the country of purchase.
How do I connect the power cord to my LG 49SH7PE?
To connect the power cord:
1. Securely plug the female end of the power cord into the power input jack on the back of the monitor.
2. Plug the male end of the power cord into a grounded wall outlet.
What are the OPS DC Power specifications for the LG 49SH7PE?
The OPS DC Power output for the LG 49SH7PE is 13.2 V – 2.65 A / 2.65 A, with a maximum of 13.2 V – 5.3 A.
How do I install or replace the batteries in the remote control for the LG 49SH7PE?
1. Locate the battery compartment on the back of the remote control.
2. Push the release button or tab and slide the cover off.
3. Insert two AAA batteries, making sure to align the positive (+) and negative (-) terminals with the markings inside the compartment.
4. Slide the cover back on until it clicks into place.
How do I turn on the LG 49SH7PE?
You can turn on the LG 49SH7PE using one of two methods:
1. Press the power button located on the bottom edge of the monitor’s frame.
2. Aim the remote control at the sensor on the monitor and press the power button.
How can I connect external devices to the LG 49SH7PE using HDMI?
To connect a device such as a computer or set-top box, use an HDMI cable to connect the HDMI output port of your device to one of the available HDMI IN ports (HDMI IN 1 or HDMI IN 2) on the monitor.
How do I connect a computer to the LG 49SH7PE using a DVI or RGB cable?
For DVI connection: Use a DVI-D cable to connect the DVI OUT port on your computer to the DVI-D IN port on the monitor.
For RGB (VGA) connection: Use an RGB cable to connect the RGB OUT port on your computer to the RGB IN port on the monitor. For sound, connect a separate audio cable from your computer’s audio output to the AUDIO IN port located next to the RGB IN port.
How do I connect the LG 49SH7PE to a wired network?
Use a standard LAN (Ethernet) cable to connect the LAN port on the back of the monitor to your router, switch, or wall network jack.
How can I control the LG 49SH7PE using an RS-232C connection?
To control the monitor from a PC or other control system, connect an RS-232C cable from the control device to the RS-232C IN port on the monitor. If you need to daisy-chain multiple monitors, you can connect a cable from the RS-232C OUT port of the first monitor to the RS-232C IN port of the next monitor in the chain.
How do I connect external speakers or an external IR sensor to the LG 49SH7PE?
External Speakers: Connect your external audio system or speakers to the AUDIO OUT port on the monitor using a standard audio cable.
External IR Sensor: To control the monitor when the built-in sensor is blocked, plug an external IR sensor into the EXT IR IN port.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD LG 49SH7PE (02) PDF DOCUMENT