LG 47LM7600-UA (01) PDF Document

To ensure peak performance and avoid dangerous situations with your LG 47LM7600-UA, always comply with the following precautions:

Installation and Environment:

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not install the product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not expose the product to dripping or splashing and do not place objects filled with liquids, such as vases or cups, on or over the apparatus.

Power and Electrical Safety:

• Protect the power cord from being walked on or pinched, particularly at plugs and convenience receptacles.

• Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician.

• To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

• Do not touch the TV with wet hands.

• Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

• Do not connect too many appliances to the same AC power outlet, as this could result in fire or electric shock. Do not overload wall outlets.

• Disconnect the power first before moving or installing the TV. Otherwise, an electric shock may occur.

• Unplug the apparatus during lightning storms or when unused for long periods.

• Never touch the apparatus or antenna during a thunder or lightning storm.

• When mounting the TV on a wall, ensure that the power and signal cables are not hanging on the back of the TV.

Usage and Maintenance:

• Only use attachments/accessories specified by the manufacturer.

• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. Use caution when moving a cart/apparatus combination to avoid injury from tip-over.

• Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed.

• Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

• Refer all servicing to qualified service personnel. Servicing is required if the apparatus has been damaged in any way.

Grounding:

Ensure you connect the earth ground wire to prevent possible electric shock. A TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. If grounding is not possible, have a qualified electrician install a separate circuit breaker. Do not attempt to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Outdoor Antenna Grounding:

If an outdoor antenna is installed, follow these precautions to protect against voltage surges and static charges:

• An outdoor antenna system should not be located near overhead power lines or other electric circuits.

• Ensure the antenna system is grounded according to Section 810 of the National Electrical Code (NEC) in the U.S.A. This provides guidance on proper grounding of the mast, supporting structure, lead-in wire, antenna discharge unit, grounding conductors, and grounding electrode.

Image burn or burn-in occurs when a fixed image is displayed on the screen for a long period, resulting in a permanent disfigurement. This is not covered by the warranty. To prevent it:

• Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD).

• If the aspect ratio is set to 4:3 for an extended period, image burn may occur on the letterboxed area of the screen.

Viewing Environment and Duration:

• Take a 5 to 15-minute break every hour when watching 3D content to avoid headache, dizziness, fatigue, or eye strain.

• Maintain a viewing distance of at least twice the screen’s diagonal length.

Age-Related Guidelines:

• Infants/Children: Viewing 3D content is prohibited for children under the age of 5. Children under 10 may overreact and require special monitoring. Children perceive more stereoscopic depth than adults.

• Teenagers: Teenagers under 19 may be stimulated by light from 3D videos. They should not watch 3D videos for a long time when tired.

• Elderly: The elderly may perceive less of a 3D effect. Do not sit closer than the recommended distance.

Health Considerations:

• Do not watch 3D videos if you feel nausea, are pregnant, or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease.

• Some users may experience seizures or other abnormal symptoms when exposed to flashing lights or patterns from 3D content.

• 3D content is not recommended for those with stereo blindness or stereo anomaly.

• If you have strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may experience fatigue due to double images. Take frequent breaks.

When to Stop Watching:

• Discontinue viewing 3D content if you feel fatigue from lack of sleep, overwork, or drinking.

• If you experience symptoms like headache, eyeball pain, dizziness, nausea, palpitation, blurriness, or discomfort, stop watching and rest until the symptoms subside. Consult a doctor if symptoms persist.

• Always use genuine LG 3D glasses. Using other glasses may prevent you from viewing 3D videos properly.

• Do not use 3D glasses as a substitute for normal glasses, sunglasses, or protective goggles.

• Do not store your 3D glasses in extremely high or low temperatures, as this can cause deformation.

• The 3D glasses are fragile and can be easily scratched. Always use a soft, clean cloth to wipe the lenses. Do not use sharp objects or chemicals to clean them.

1. Open the package and ensure all accessories are included.

2. Attach the stand to the TV set.

3. Connect any external devices to the TV set.

4. Ensure the network connection is available if you plan to use network functions.

• Avoid touching the screen at all times to prevent damage.

• It is recommended to move the TV in its original box or packing material.

• Before moving, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• When transporting a large TV, at least two people are required.

• When transporting by hand, hold the TV by the top and bottom of the frame. Do not hold the transparent part, speaker, or speaker grill area.

• Keep the TV upright during transport; do not turn it on its side or tilt it.

• Do not expose the TV to jolts or excessive vibration during transport.

To attach the stand:

1. Place the screen facing down on a cushioned table or flat surface to protect it from scratches.

2. Assemble the stand body and stand base.

3. Attach the assembled stand to the TV using the provided screws (M4 x 20).

4. Tighten the screws firmly to prevent the TV from tilting forward.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) of space between the TV and the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Adjusting the Angle:

You can swivel the TV 10±2 degrees to the left or right to adjust the viewing angle. Be careful not to pinch your fingers when adjusting.

Securing the TV to a table (Depending on model):

To prevent the TV from tilting or falling:

1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws.

2. Fix the Desk-mount Cables to the table using the Desk-mount Screws.

3. Once fixed, move the table close to the wall.

It is recommended that wall mounting be performed by a qualified professional installer. Use a wall mount bracket that meets the VESA standard.

The specifications for the LG 47LM7600-UA are:

Cautions:

• Disconnect the power first before installing the TV.

• Use an authorized LG wall mount. If you install the TV on a ceiling or slanted wall, it may fall and cause severe injury.

• Do not over-tighten the screws, as this may damage the TV and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Damages or injuries from misuse are not covered by the warranty.

1. Gather and bind the cables together using the provided cable holder.

2. Fix the cable management clip firmly to the TV to keep cables tidy.

Caution: Do not move the TV by holding the cable holder, as it may break and cause injury or damage to the TV.

You can connect various external devices like HD receivers, DVD/VCR players, audio systems, USB devices, PCs, and gaming devices.

Connecting an Antenna or Cable:

Connect your antenna or cable to the ANTENNA/CABLE IN port on the back of the TV using a coaxial (75Ω) cable. Complete all connections between devices before plugging the TV into a power outlet.

HDMI Connection:

This is the best way to connect a device. It transmits digital video and audio. Connect an HDMI cable from the external device to any of the HDMI IN ports on the TV. Use a High Speed HDMI™ Cable for best results. HDMI IN 1 supports ARC (Audio Return Channel).

DVI to HDMI Connection:

To connect a device with a DVI output, use a DVI-to-HDMI cable for the video signal. For audio, connect a separate audio cable from the device’s audio out to the TV’s (RGB/HDMI-PC) AUDIO IN port.

Component Connection:

This transmits analog video and audio. Use the provided component video cable (green, blue, red for video) and an audio cable (white, red) to connect your device. Match the cable colors to the corresponding ports on both the device and the TV.

Composite Connection:

This transmits analog video and audio. Use the provided composite video cable (yellow for video) and an audio cable (white, red). Match the cable colors to the corresponding ports.

Connecting to a PC:

• Method A (HDMI): Connect an HDMI cable from your PC to an HDMI IN port on the TV. This is the recommended method for the best image quality.

• Method B (DVI to HDMI): Use a DVI-to-HDMI cable for video and a separate audio cable for sound.

• Method C (RGB): Use an RGB (VGA) cable for video and a separate audio cable for sound.

Connecting to an Audio System:

Use a digital optical audio cable to connect from the OPTICAL DIGITAL AUDIO OUT port on the TV to an optical audio input on your external audio system. If you use an external system, set the TV speaker feature to Off.

Connecting a USB Device:

Connect a USB storage device (flash memory, external hard drive) to one of the USB IN ports. The USB IN 3 port is designated for USB Apps, and the USB IN 2 port is for a USB Hub.

Functions:

• Pointer: Point the remote at the TV to move the on-screen cursor.

• POWER: Turns the TV on or off.

• BACK: Returns to the previous level.

• HOME: Accesses the Home menu.

• Wheel (OK): Selects menus or options and confirms input. Scrolls through saved channels.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• VOL +/-: Adjusts the volume level.

• CH ^/v: Scrolls through the saved channels.

• (MUTE): Mutes all sounds.

• 3D: Used for viewing 3D video.

• MY APPS: Shows the list of Apps.

• Q.MENU: Accesses the quick menu.

Pointer Usage:

If the pointer disappears, shake the Magic Remote from side to side to make it reappear. If you press a navigation button while the pointer is on-screen, the pointer will disappear, and the remote will function like a standard remote.

Battery Replacement:

When the “Magic remote control battery is low” message appears, replace the batteries. Open the battery cover, replace the two 1.5V AA batteries, matching the (+) and (-) ends, and close the cover.

The Magic Remote Control operates by pairing with your TV.

How to register the Magic Remote Control:

To register the remote control, simply press the Wheel (OK) button on the remote while pointing it at the TV.

How to Re-register after a Registration Failure:

1. Press and hold the BACK and HOME buttons together for 5 seconds to reset the remote. The light on the Pointer will blink when the reset is complete.

2. Re-register the remote by pressing the Wheel (OK) button.

Alternatively, to re-register, you can press and hold the BACK button for 5 seconds while pointing it toward the TV.

1. Connect the power cord to a power outlet.

2. In Standby mode, press the power button on the remote control to turn the TV on. The Initial Setting screen will appear.

3. Follow the on-screen instructions to customize your settings:

• Language Selection: Select a display language.

• Using the Magic remote control: Sets up the remote control.

• Environment Selection: Select Home for the home environment. (The Store mode is for retail demos).

• Time Zone Setting: Select your time zone.

• Network Connection: Set up your network to enable smart features.

• Auto Tuning: Scans and saves available channels.

• Auto Energy Saving mode Setting: Selects the energy-saving mode.

• 3D-On-Start Setting: Selects the 3D-On-Start option.

4. When the basic settings are complete, press the Wheel (OK) button to confirm.

5. To turn the TV off, press the power button on the remote control.

The User Guide provides detailed information about your TV’s features.

1. Press the HOME button on the remote to access the HOME menu.

2. Select User Guide and press the Wheel (OK) button.

Within the User Guide, you can:

• Use the navigation buttons to select a category and an item.

• Read the description of the selected function.

• Select “Try Now” to move directly to that feature’s menu.

• Zoom in or out of the on-screen text for better readability.

Regularly clean your TV to maintain the best performance and extend its lifespan.

Before you start:

• Make sure to turn the power off and disconnect the power cord and all other cables.

Screen, frame, cabinet, and stand:

• For dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• For major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then, immediately wipe with a dry cloth.

Caution:

• Do not push, rub, or hit the surface with your fingernail or a sharp object, as this can cause scratches and image distortions.

• Do not use chemicals like waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants. These can damage the screen’s finish and cause discoloration.

• Do not spray liquid directly onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord:

• Remove any accumulated dust or dirt on the power cord regularly.

Video input from the sources below is switched to the 3D screen automatically. If it does not switch, you may need to manually convert the settings.

3D Supported Mode Automatically

3D Supported Mode Manually

To ensure safety, especially with children in the home, please follow these recommendations:

• Follow the manufacturer’s recommendations for safe installation and use of your flat panel display.

• Do not allow children to climb on or play with furniture and television sets.

• Do not place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Place or install the display where it cannot be pushed, pulled over, or knocked down.

• Route all cords and cables so they cannot be pulled or grabbed by curious children.

If you decide to wall mount your flat panel display:

• Use a mount recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• Ensure the wall where you are mounting the display is appropriate. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation as flat panel displays can be heavy.