LG 47LM7600 (01) PDF Document

To ensure peak performance and avoid dangerous situations with your LG 47LM7600 TV, always comply with the following precautions:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched.

• Only use attachments/accessories specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

• Never touch this apparatus or antenna during a thunder or lightning storm.

• Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

• Do not expose the product to dripping or splashing and do not place objects filled with liquids on or over the apparatus.

When moving or lifting the LG 47LM7600 TV, follow these instructions to prevent damage and ensure safe transportation:

• Avoid touching the screen at all times, as this may result in damage to the screen.

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting, do not expose the TV to jolts or excessive vibration.

• Keep the TV upright; never turn the TV on its side or tilt it towards the left or right.

• To move the TV, make sure the product is turned off, unplugged, and all cables have been removed. Do not press or put stress on the front panel of the TV.

To prevent image burn-in, which is a permanent disfigurement on the screen and not covered by the warranty, follow these guidelines:

• Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD TVs). If a fixed image is displayed for a long time, it will become imprinted on the screen.

• If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

Viewing Environment:

• Viewing Time: When watching 3D content, take a 5-15 minute break every hour. Viewing for a long period may cause headaches, dizziness, fatigue, or eye strain.

• Viewing Distance: Maintain a distance of at least twice the screen diagonal length. If you feel discomfort, move further away from the TV.

Viewing Age:

• Infants/Children: Viewing 3D content for children under the age of 5 is prohibited. Children under 10 may overreact and require special monitoring.

• Teenagers: Teenagers under 19 may be stimulated by light from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

• Elderly: The elderly may perceive less of a 3D effect. Do not sit closer than the recommended distance.

Chronic Illnesses:

• Some users may experience seizures or other abnormal symptoms when exposed to flashing lights or patterns from 3D content.

• Do not watch 3D videos if you feel nausea, are pregnant, or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease.

• 3D content is not recommended for those with stereo blindness or stereo anomaly.

Symptoms Requiring Discontinuation:

• If you experience fatigue, headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, or visual inconvenience, stop watching 3D content and rest until the symptoms subside. Consult a doctor if symptoms persist.

• Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

• Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles.

• Using modified 3D glasses may cause eye strain or image distortion.

• Do not keep your 3D glasses in extremely high or low temperatures, as it will cause deformation.

• The 3D glasses are fragile and easy to scratch. Always use a soft, clean cloth when wiping the lenses. Do not scratch the lenses with sharp objects or clean them with chemicals.

1. Open the package and make sure all the accessories are included.

2. Attach the stand to the TV set.

3. Connect an external device to the TV set.

4. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.

The items supplied with your LG 47LM7600 TV may vary depending on the model, but typically include:

• Magic Remote Control, Batteries (AA)

• Owner’s manual

• Cable holder (Depending on model)

• Stand Screws (8 EA, M4 x 20)

• Composite video cable

• Component video cable

• Cinema 3D Glasses (The number may differ depending on the model or country)

• Stand Body

• Stand Base

• Polishing cloth (Depending on model)

• Power Cord (Depending on model)

• Wall mount inner spacers (4 EA, Depending on model)

• Desk-mount Screw (2 EA, Depending on model)

• Bracket Screw (M4 x 8, 2 EA, Depending on model)

• Desk-mount Cable (2 EA, Depending on model)

The buttons on the LG 47LM7600 TV and their functions are as follows:

The TV also features an Intelligent sensor that adjusts the image quality and brightness based on the surrounding environment.

To attach the stand, place the screen facing down on a cushioned table or flat surface to protect it from scratches. Assemble the stand body and stand base, then attach the combined stand to the back of the TV using the provided screws (4 EA, M4 x 20). Tighten the screws firmly to prevent the TV from tilting forward.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (4 inches) minimum space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Securing the TV to a table (Depending on model):

1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws.

2. Fix the Desk-mount Cables to a table using the Desk-mount Screws.

3. Once the TV is fixed, move the table close to the wall.

You can swivel the LG 47LM7600 TV 10±2 degrees to the left or right to adjust the angle to suit your view. When adjusting the angle, watch out for your fingers to prevent them from being pinched.

For the LG 47LM7600 TV, use a wall mount bracket that meets the VESA standard. The specifications are as follows:

When attaching a wall mount, disconnect the power first. Use an authorized LG wall mount and have it installed by a qualified professional. Use screws that meet the VESA standard and do not over-tighten them.

1. Gather and bind the cables with the provided cable holder.

2. Fix the cable management clip firmly to the TV to keep cables tidy.

Caution: Do not move the TV by holding the cable holder, as it may break and cause injury or damage to the TV.

You can connect various external devices to your LG 47LM7600 TV. Here are the common connection methods:

• Antenna or Cable: Connect the antenna or cable line to the ANTENNA/CABLE IN port using a coaxial (75Ω) cable.

• HDMI Connection: This is the best method for digital video and audio. Connect your HD receiver, Blu-Ray/DVD player, or game console to any of the HDMI IN ports using a High Speed HDMI cable. The HDMI IN 1 (ARC) port supports Audio Return Channel, which can send digital audio to a compatible device without an extra audio cable.

• DVI to HDMI Connection: To connect a device with a DVI output (like a PC), use a DVI-to-HDMI cable to connect to an HDMI IN port. For audio, connect a separate audio cable from the device’s audio out to the (RGB/HDMI-PC) AUDIO IN port on the TV.

• Component Connection: This transmits analog video and audio. Use the provided component video cable (green, blue, red) and a standard audio cable (white, red) to connect your device to the COMPONENT IN ports on the TV. Match the colors of the cables to the ports.

• Composite Connection: Use the provided composite video cable (yellow) and a standard audio cable (white, red) to connect your device to the AV IN ports on the TV. Ensure each cable is matched to its corresponding color.

• Connecting to a PC: Besides HDMI or DVI-to-HDMI, you can use an RGB (VGA) cable for video and a separate audio cable connected to the (RGB/HDMI-PC) AUDIO IN port.

• Connecting to an Audio System: Use an optical audio cable to connect the OPTICAL DIGITAL AUDIO OUT port on the TV to an optical audio input on your soundbar or home theater system.

• Connecting a USB Device: Connect a USB flash drive, external hard drive, or USB memory card reader to any of the USB IN ports to access multimedia files.

Registering the Magic Remote:

To register the remote control for the first time, simply press the Wheel (OK) button on the remote control while pointing it at the TV.

Re-registering the Magic Remote:

If registration fails or you need to re-register, press and hold the BACK and HOME buttons together for 5 seconds to reset the remote. Once the light on the pointer blinks, you can register it again by pressing the Wheel (OK) button.

Using the Magic Remote Pointer:

If the on-screen pointer disappears, move the remote control slightly to the left or right, and it will automatically reappear. The pointer will also disappear after a certain period of inactivity. You can move the pointer by aiming the remote at the TV and moving it left, right, up, or down.

• POWER: Turns the TV on or off.

• BACK: Returns to the previous level.

• HOME: Accesses the Home menu.

• Wheel (OK): Selects menus or options and confirms your input. Scrolls through saved channels.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• VOL (+/-): Adjusts the volume level.

• CH (^/v): Scrolls through the saved channels.

• MUTE: Mutes all sounds.

• 3D: Used for viewing 3D video.

• MY APPS: Shows the list of Apps.

• Q.MENU: Accesses the quick menu.

1. Connect the power cord to a power outlet.

2. In Standby mode, press the power button on the remote control to turn the TV on. The Initial Setting screen will appear.

3. Follow the on-screen instructions to customize your TV settings. You will be prompted to set the following:

• Language Selection: Selects a language to display.

• Using the Magic remote control: Sets up the remote.

• Environment Selection: Select Home for the home environment. (The Store mode is for retail demos).

• Time Zone Setting: Selects the time zone and daylight saving.

• Network Connection: Sets your network to enable network-related features.

• Auto Tuning: Scans and saves available channels automatically.

• Auto Energy Saving mode Setting: Selects the energy-saving mode.

• 3D-On-Start Setting: Selects the 3D-On-Start option.

4. When the basic settings are complete, press the Wheel (OK) button. Your TV is now ready to use.

1. Press the HOME button on the remote to access the HOME menu.

2. Select User Guide and press the Wheel (OK) button.

Inside the User Guide, you can:

• See the current channel information.

• Select a category and an item to view.

• Use the up/down navigation buttons to move between pages of the description.

• Select Try Now to move directly to the menu screen for the selected function.

• Zoom in or out of the screen for better readability.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed (positive to positive, negative to negative).

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

• Check the power control settings. The power supply may be interrupted.

• Check if the Auto sleep feature is activated in the Time settings.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

The following table lists the 3D video formats that are automatically detected and switched by the LG 47LM7600 TV.

Clean your TV regularly to keep it in the best condition. First, make sure to turn the power off and disconnect the power cord and all other cables.

Screen, frame, cabinet and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

Caution:

• Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches and image distortions.

• Do not use any chemicals such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration.

• Do not spray liquid directly onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord:

• Remove the accumulated dust or dirt on the power cord regularly.

Please keep these safety tips in mind for child safety:

• Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

• Do not allow children to climb on or play with furniture and television sets.

• Do not place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Take care to place or install the display where it cannot be pushed, pulled over, or knocked down.

• Route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

If you decide to wall mount your flat panel display, always use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory. Follow all instructions and ensure a minimum of two people are present for installation, as flat panel displays can be heavy.

The LG 47LM7600 TV qualifies for ENERGY STAR in the “factory default (Home Use)” setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR.