Free English LELO INA 3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO INA 3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I get started with the LELO INA 3?
Before first use, charge your LELO INA 3 for 2 hours.
Unlock by pressing and holding the + and – buttons simultaneously for 3 seconds until the light turns on.
Press + button to turn on; press again to increase the vibration strength.
Press the arrow buttons to switch between the 10 vibration patterns.
Press – button to reduce vibration strength.
Press and hold – button to turn off.
How do I charge the LELO INA 3?
Insert the DC plug into the DC port at the bottom of your LELO INA 3.
The LED on the interface of your LELO INA 3 will pulse to indicate it is charging.
When it is fully charged (after c. 2 hours), the LED will emit a steady glow.
When the battery is running low, the LED on your LELO INA 3 will emit a blinking red light.
Only use original chargers provided by LELO with your LELO INA 3.
What type of lubricant should I use with the LELO INA 3?
For the most pleasurable sensation, apply a liberal amount of LELO Personal Moisturizer to your body and to the LELO INA 3 before and during use.
Using the LELO INA 3 with hand creams or silicone-based lubricants may make the silicone permanently tacky.
How do I clean the LELO INA 3?
The LELO INA 3 is fully waterproof, making cleaning simple. Rinse and spray with LELO Toy Cleaner, then rinse again and allow to dry.
Always clean your LELO INA 3 thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.
Never use cleansers containing alcohol, petrol, or acetone.
How should I store the LELO INA 3?
Avoid leaving your LELO INA 3 in direct sunlight and NEVER expose it to extreme heat.
Store your LELO INA 3 in a dust-free place and keep it away from products of other materials.
Are there important safety warnings for the LELO INA 3?
Children shall not play with the appliance. For adult use only.
Those who may be pregnant, have a pacemaker, diabetes, phlebitis, thrombosis or any other condition, should consult with a medical professional regarding the risk of blood clots before using any personal massage product.
The appliances must only be supplied at SELV.
Why does the LED on my LELO INA 3 not pulse when the charger is connected?
The battery is drained and will require several minutes to acknowledge that it is being charged.
The charger is not properly connected. Check wall and DC sockets.
Why does the LELO INA 3 not activate when the + button is pressed?
The battery is empty. Recharge your LELO INA 3.
The interface of your LELO INA 3 is locked. Hold down + and – for 5 seconds.
What are the specifications of the LELO INA 3?
| Materials | Body-safe Silicone, ABS |
| Body Colors | Coral, Seafoam, Seaweed |
| Interface | 4-button |
| Switch Off | Automatic |
| Frequency | 60Hz |
| Battery | Li-Ion 520mAh 3.7V |
| Charge Time | 2 hours at 5.0V 500mA |
| User Time | Up to 2 hours |
| Standby Time | Up to 90 days |
| Size | 200 x 65 x 45 mm / 7.9 x 2.5 x 1.7 in |
| Insertable Length | 110 mm / 4.3 in |
| Weight (Only Product) | 150 g / 0.33 lb |
CLICK HERE TO DOWNLOAD LELO INA 3 (01) PDF DOCUMENT