Free English LEDJ REPID QB1 LEDJ350 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LEDJ REPID QB1 LEDJ350 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications of the LEDJ REPID QB1 LEDJ350?
The technical specifications for the LEDJ REPID QB1 LEDJ350 are as follows:
Power consumption: 45W
Power supply: 100 to 240V, 50/60Hz
Fuse: F3.15A 250V
Battery: 14.8V 5200mAh
Battery fuse: F5A 250V
Dimensions: 204 x 138 x 144mm
Weight: 3kg
How can I adjust the DMX address for the LEDJ REPID QB1 LEDJ350?
To set the DMX address, press the MENU button and use the UP and DOWN buttons on the front of the LEDJ REPID QB1 LEDJ350 until d001 is shown on the display. Press the ENTER button, then use the UP and DOWN buttons to select the desired DMX address. Press ENTER again to confirm the setting. To exit, press the MENU button.
How do I change the DMX channel mode on the LEDJ REPID QB1 LEDJ350?
To access the DMX channel mode, press the MENU button and use the UP and DOWN buttons until CHAn is displayed. Press the ENTER button and use the UP and DOWN buttons to select between 4, 6, or 11 channel modes. Press ENTER to confirm your selection.
How do I use the Colour mix mode on the LEDJ REPID QB1 LEDJ350?
Press the MENU button and select NAnU on the display. Press ENTER and use the UP and DOWN buttons to choose between rEd (Red), GrEE (Green), bLUE (Blue), or ANbE (Amber). Once the desired colour is selected, press ENTER and use the UP and DOWN buttons to set the brightness value between 000 and 255. Press ENTER to confirm.
How do I pair the LEDJ REPID QB1 LEDJ350 with a wireless DMX transmitter?
Before pairing, clear the existing wireless memory by accessing the N-5 menu, selecting SLAV, and pressing ENTER until CLEA is shown. Hold the DOWN button for 5 seconds. To pair, ensure the wireless DMX indicator is off and the fixture is set to slave mode. Press the pair button on your transmitter. The wireless DMX indicator will flash rapidly, then turn solid yellow once the pairing is successful.
How do I operate the built-in programs on the LEDJ REPID QB1 LEDJ350?
Press the MENU button and navigate to rUnN on the display. Press ENTER to select from the following built-in programs:
CoLo: Select from 25 static colours (Co01 to Co25).
FAdE: Select from 5 fade programs (FA01 to FA05) and adjust speed (SP01 to SP09).
AUto: Adjust the auto speed (SP01 to SP09).
SoUn: Adjust the sound sensitivity (SE01 to SE09).
Stro: Adjust the strobe speed (St00 to St10).
What do the LEDJ REPID QB1 LEDJ350 wireless DMX indicator statuses mean?
The indicator status provides the following information:
Solid yellow: The fixture is paired.
Flashing fast yellow: The fixture settings from the last pair are saved, but it is not currently paired.
Flashing slow yellow: The fixture is paired with the transmitter but is not receiving a signal.
Indicator off: The fixture has no remembered wireless settings and is not paired.
How do I set up master/slave mode on the LEDJ REPID QB1 LEDJ350?
To set the master unit, press the MENU button, navigate to N-5, press ENTER, select NASt, and confirm. Select your desired program on this unit. For slave units, navigate to N-5, press ENTER, select SLAV, and confirm. Ensure all slave units are set to the same DMX channel mode as the master.
How do I enable Eco mode on the LEDJ REPID QB1 LEDJ350?
Press the MENU button, go to batt, press ENTER, and select ECon. Press ENTER again and use the UP and DOWN buttons to choose between on or ofF. Press ENTER to confirm. Eco mode helps the fixture run longer on a single charge when using 3 or more colour programs by slightly reducing intensity.
What are the battery indicator meanings for the LEDJ REPID QB1 LEDJ350?
The charge indicator LED status is as follows:
Illuminated red: The fixture is recharging.
Illuminated yellow: The battery charge is less than 30 percent.
Illuminated green: The battery is charged.
CLICK HERE TO DOWNLOAD LEDJ REPID QB1 LEDJ350 (01) PDF DOCUMENT