Free English KYORITSU ELECTRICAL INSTRUMENTS 9189 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KYORITSU ELECTRICAL INSTRUMENTS 9189 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I use the KYORITSU ELECTRICAL INSTRUMENTS 9189 Magnet Hanger Strap?
1. Detach the Flat-type or Wing-type holder from the instrument.
2. Attach the Hanger strap to the instrument by sliding it along the groove on the instrument.
3. You can then hang the instrument using either the magnet or the belt.
How do I hang my instrument with the magnet using the KYORITSU ELECTRICAL INSTRUMENTS 9189?
After attaching the Hanger strap to the instrument, you can put the magnet on any metal surface and hang the instrument.
How do I hang my instrument with the belt using the KYORITSU ELECTRICAL INSTRUMENTS 9189?
Hanging the instrument with the belt is possible by storing the magnet head part on the backside of the instrument.
How do I adjust the belt length of the KYORITSU ELECTRICAL INSTRUMENTS 9189?
Adjust the adjuster to alter the belt length. Do not set the adjuster too close to the magnet head part. Otherwise, the strap cannot be attached to the instrument.
How do I detach the KYORITSU ELECTRICAL INSTRUMENTS 9189 strap from the instrument?
To detach the strap from the instrument, press the release buttons and pull out the magnet head part.
What safety precautions should I take when using the KYORITSU ELECTRICAL INSTRUMENTS 9189?
DANGER
This magnet may affect safe and proper operation of medical devices. Stay away from or do not use this magnet strap if you have a pacemaker or other electronic medical devices.
CAUTION
Read through and follow the operating instructions and precautions described in the instruction manual for each digital multi-meter.
Always keep magnetic cards, PCs and displays away from the magnet.
Care should be taken so as not to short-circuit the object under test with the metal part of the backside of the magnet head part.
Which devices is the KYORITSU ELECTRICAL INSTRUMENTS 9189 strap designed for?
The Magnet hanger strap MODEL 9189 is supplied as an optional item for the digital multi-meters KEW1020R and KEW1021R.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KYORITSU ELECTRICAL INSTRUMENTS 9189 (01) PDF DOCUMENT