KUSSMAUL AUTO CHARGE 12 091-142-36 (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Click here to download KUSSMAUL AUTO CHARGE 12 091-142-36 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** IM_og1 -1 42-XXX Rev.A, 1-25-06 INs-rnucT10N MANUAL AUTO CHARGE AUTOMATIC BATTERY CHARGER TRANslENT SUPPRESSED THIS CHARGER IS NOT REVERSE POLARITY PROTECTED MODEL #091-14æ-xx NOTE : This charger is designed for installations with a single battery system INPUT : 1 IS vole, 50/60 Hz, e.4amps a YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC. 1 70 CHERRY AVE. , WEST SAYVILLE, N.Y. 1 1 796-1 221 TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826

****** Page 2 ****** INTRODUCTION The Auto Charge 12, Model 091-142-XX is a compact completely automatic charger designed for installation in systems which require transient protection and temperature compensation. A thermistor is provided to sense the temperature of the battery so that the charging voltage is automatically compensated. A front panel ammeter indicates the charge current status of the battery. Construction of the Auto Charge 12 is extremely rugged to withstand shock and vibration. In addition the power input lines, charger output, and the voltage sense connections are provided with filters and MOV transient suppressors. These suppression circuits permit the charger to meet ANSI/IEEE C37.90.1-1989. INSTALLATION The Model 091-142 Auto Charge 12 Automatic Battery Charger should be installed in an area with adequate ventilation. A power cord is supplied for connection to 115 volts 60 Hz. 1. 2. 3. 4. 5. Mount the charger using the four holes provided for this. Connect the wiring from the battery to the Output Terminal Strip. Spade lugs that have been securely crimped, or soldered should be used. Connect the thermistor supplied with the charger to the Output Terminal Strip. Double check all wiring before proceeding Wire the A.C. power line cord to 115 volts. The pilot light will show that the charger has power.

****** Page 3 ****** INSTALLATION WIRING DIAGRAM O POWER AUTO CHARGE 12 O BATTERY THERMISTOR TH2 THI lall THERMISTOR BOND TO, OR PLACE NEXT TO BATTERY NOTE: THIS CHARGER IS NOT REVERSE POLARITY PROTECTED, PLEASE WIRE CAREFULLY WIRE SIZE CHART CONNECTION ITEM BAT- BAT+ BATTERY NEGATIVE BATTERY POSITIVE DEFINITION NEGATIVE CHARGING LEAD FOR BATTERIES POSITIVE CHARGING LEAD FOR BATTERY # 1 WIRE SIZE 12 AWG 12 AWG IMPORTANT: Wire size is for a maximum length of 20 feet. If wiring is to be longer, larger wiring is re- qui red. Additional information is avail- able on request.

****** Page 4 ****** SPECIFICATION e OUTLINE INPUT POWER: 115 volts 50/60 Hz, 2.4 amperes TRANSIENT PROTECTION: Complies with ANSI/I EEE OUTPUT POWER & CURRENT: See Chart BATTERY FLOAT VOLTAGE: See Chart REVERSE POLARITY PROTECTION: None C37.90.1-198 TEMPERATURE COMPENSATION: -4 millivolts per deg CHARGE INDICATOR: See Chart AMBIENT TEMPERATURE: O to 50 deg. C WEIGHT: 12 pounds C per 2 volt cell CHARGE INDICATOR MODEL 091-142-12 091-142-24 091-142-36 091-142-48 091-142-72 12.00 OUTPUT VOLTS 12 24 36 48 72 AMps 12 6 4 3 2 6.75 FLOAT VOLTAGE at 20 d . C 13.25 volts 26.50 39.75volts 53.00 wits 79.50 volts 15 am 10 am 5 am 5 am re re re 3 ampere 12.75 UTO CHARGE 4.75 9/32″ DIA. 4 HOLES 425 OUTLINE DRAWING

****** Page 5 ****** INSTALI-ATION Date Installed Installed By Vehicle Identification Vehicle Owner e WARRANTY WARRANTY All product of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped. Kussmaul Electronics Company, Inc. shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. products. The purchaser, by the accep- tance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others.


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.