Free English KOPUL LT-PDI2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KOPUL LT-PDI2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What does the KOPUL LT-PDI2 do?
The KOPUL LT-PDI2 converts an unbalanced line-level stereo signal from a laptop, tablet, or smartphone to a balanced, mic-level mono signal. The audio signal from your device can be output to a mixing console, sound card, or PA system via its XLR connector.
What are the key features of the KOPUL LT-PDI2?
The KOPUL LT-PDI2:
Converts 3.5 mm line-level signal to XLR mic-level signal
Has a 3.5 mm TRS input connector
Has an XLR output connector
Has a Ground-lift switch that eliminates hum
Has a Mute switch
How do I connect a laptop or smartphone to the KOPUL LT-PDI2?
Plug the 3.5 mm cable into any device that has a 3.5 mm output such as a laptop, tablet, or smartphone.
How do I connect the KOPUL LT-PDI2 to a sound system?
Plug the XLR end of the KOPUL LT-PDI2 directly into the mic input of a mixing board, sound card, or PA system. For longer cable runs when the 4.7-foot cable isn’t long enough, use an XLR cable.
What is needed to use the KOPUL LT-PDI2 with devices that have USB-C or Lightning connectors?
To use devices with USB-C or Lightning connectors, a USB-C/Lightning to 1/8 in. TRS female adapter (not included) is needed.
How is the output signal strength adjusted on the KOPUL LT-PDI2?
Use the volume knob to adjust the strength of your output signal. To avoid distortion and ensure your signal doesn’t clip, check the input volume meters on your DAW.
How should the Ground/Lift switch be set for normal operation of the KOPUL LT-PDI2?
For normal operation, set the Ground/Lift switch to the Ground position.
How do I eliminate hum or buzz caused by a ground loop using the KOPUL LT-PDI2?
To eliminate hum or buzz caused by a ground loop, set the switch to the Lift position.
How should the Mute switch be set for normal operation of the KOPUL LT-PDI2?
For normal operation, make sure the mute switch is inactive (up position).
How do I mute and unmute the audio using the KOPUL LT-PDI2?
To mute the audio, press the mute switch. To unmute, press the mute switch again so it’s in the up position.
What are the specifications regarding the Type, Input, and Output of the KOPUL LT-PDI2?
The Type of the KOPUL LT-PDI2 is Passive.
The Input is Stereo.
The Output is Balanced mono.
What are the connector types for the KOPUL LT-PDI2?
The connectors for the KOPUL LT-PDI2 are:
3-pin XLR male
1/8 in. (3.5 mm) TRS male
What is the Frequency Range and THD for the KOPUL LT-PDI2?
The Frequency Range is 50 Hz to 20 kHz (±0.5 dB).
The THD is 0.02% @ 1 kHz, 0 dB.
What is the Output Level and Dielectric Strength of the KOPUL LT-PDI2?
The Output Level is -20 to 0 dB.
The Dielectric Strength is 500 V DC / 1 mA / 1 sec.
What are the Dimensions, Weight, and Cable Length of the KOPUL LT-PDI2?
The Dimensions of the KOPUL LT-PDI2 are 4.4 x 1.25 x 1 in. (11.2 x 3.2 x 2.5 cm).
The Weight is 5 oz. (142 g).
The Cable Length is 4.7 ft. (1.4 m).
What material is the KOPUL LT-PDI2 made of and what color is it?
The Material of the KOPUL LT-PDI2 is Aluminum alloy.
The Color is Black.
What controls are available on the KOPUL LT-PDI2?
The controls on the KOPUL LT-PDI2 are Volume, ground switch, mute switch.
What precautions should be taken when handling the KOPUL LT-PDI2?
Precautions for the KOPUL LT-PDI2 include:
Please read and follow these instructions, and keep this manual in a safe place.
Make sure that this product is intact and that there are no missing parts.
Keep this unit away from water and any flammable gases or liquids.
Clean this product with only a soft, dry cloth.
All images are for illustrative purposes only.
CLICK HERE TO DOWNLOAD KOPUL LT-PDI2 (01) PDF DOCUMENT