Free English KOMODO KDKTNDLCMPC (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KOMODO KDKTNDLCMPC (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What components are included with the KOMODO KDKTNDLCMPC Camping Kitchen?
The following components are provided for the assembly and use of the KOMODO KDKTNDLCMPC:
| Ref | Component Name |
| A | Short Aluminium Board |
| B | Long Aluminium Board |
| C | Steel Windshield |
| D | Non-Folding Plastic Wash Basin |
| E | MDF Wood Cupboard Shelves (x4) |
| F | 600D Oxford Fabric Cupboard |
| G | X-Shaped Aluminium Alloy Frame |
How do I assemble the KOMODO KDKTNDLCMPC Camping Kitchen?
The assembly of the KOMODO KDKTNDLCMPC involves the following steps:
Step 1. Begin by unfolding the X-Shaped Aluminium Alloy Frame and extending it outward.
Step 2. Secure the lower support structure by locking the horizontal bars into place at the base of the frame.
Step 3. Ensure the 600D Oxford Fabric Cupboard is fully expanded and attached to the frame. Insert the MDF Wood Cupboard Shelves into the fabric compartments.
Step 4. Place the Non-Folding Plastic Wash Basin into the left side of the upper frame.
Step 5. Install the Short Aluminium Board and the Long Aluminium Board across the top surface. Finish the assembly by attaching the Steel Windshield around the cooking area on the Long Aluminium Board.
How do I pack and fold the KOMODO KDKTNDLCMPC for storage?
To pack the KOMODO KDKTNDLCMPC Camping Kitchen, follow these specific instructions:
Step 1. Press down on the structure at the designated P point to secure it during the folding process.
Step 2. Hook the H point to the top unhook.
Step 3. Fold the E aluminum tube into the top A aluminum tube.
Step 4. Fold the F aluminum tube into the top B aluminum tube.
Step 5. Finally, fold the A aluminum tubes together to complete the packing of the unit.
CLICK HERE TO DOWNLOAD KOMODO KDKTNDLCMPC (01) PDF DOCUMENT