KITCHENAID KSB4043 (01) PDF MANUAL

First, clean all parts and accessories. Be sure the countertop beneath the Blender and surrounding areas are dry and clean.

When moving your Blender, always support/lift from the Blender Base. Base will become disengaged from Jar if carried by Blender jar or Blender Jar handle only.

Add ingredients into Jar (maximum 56 oz / 1.6 L or maximum 48 oz / 1.4 L for Glass Jar). Secure the Lid and Lid Center Cap.

Place and align the Jar with the Slot to fit inside the jar pad, facing Jar handle towards Control Dial. Plug the Blender into a grounded 3 prong outlet.

Turn Dial from (O) to desired speed or preset recipe program. Press (▷I®) button to start. See section “Blender Function Guide” for more details.

When finished, press (▷|✉) button to stop. Unplug before removing the Blender Jar.

For variable speeds (from 1 to 5), the Blender will stop automatically after 3 minutes of run time. For preset recipe programs, the Blender will automatically stop blending once the cycle is complete.

Pulse mode: Press (▷I®) button. Turn and hold the Control Dial from (O) to (P) as per desired interval of time. When finished, release the Dial to stop.

Tamper accessory: Remove the Lid Center Cap only. Stir or press contents down towards the blade. Then, place the Lid Center Cap back before resuming blending.

If blending hot liquids and ingredients, start on a low speed and then ramp up to the desired speed. Use variable speed and run for 1-2 minutes.

Allow the Blender to fully stop before removing the Lid, Jar, or pouring out blended ingredients.

Place the Gear Assembly on Base. Place the Juice Container on Gear Assembly and twist clockwise to lock in place.

Place the Pulp Basket and then the Reamer into the Juice Container by aligning them with the Drive Shaft.

Turn from (O) to speed (1 or 2). Hold down the halved citrus fruit on the Reamer. Press (▷) button to start.

Press (▷) button to stop the Blender. Turn the Control Dial to (O). Unplug the Blender.

Allow the Blender to fully stop before removing the Reamer, Juice Container, or pouring out the juice.

Twist the Juice Container counterclockwise and lift it by using handle. Pour and enjoy!

The Personal Jar is perfect in size for single servings or smaller recipes and handy to carry with you on the go. And the Small Batch Jar is perfect for smaller recipes like sauces, dressings, marinades and more.

Personal Jar: Add ingredients (maximum 16 oz / 500 ml). Add ice or frozen items, then leafy greens, then soft foods and liquids at last.

Small Batch Jar: Add ingredients (maximum 6 oz / 200 ml).

Secure the Blade Assembly on the Jar and rotate it clockwise until it is tight. Place it on the Base.

Turn from (O) to desired speed or preset recipe program. Press (▷I®) button to start. See “Blender Function Guide” section for more details.

Press (▷) button to stop. Always remove the Personal Jar or Small Batch Jar with Blade Assembly from the Base.

Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.

Fill half of the Jar with warm water and add 1 or 2 drops of dish-washing liquid. Place the Jar on the Base. Secure the Lid and Lid Center Cap.

Turn from (O) to (✔). Press (1) button to start. Remove and empty contents and rinse with warm water and dry thoroughly.

Unplug before cleaning. Wipe the Base, Power Cord and the Gear Assembly of the Citrus Press with a warm, damp cloth and dry with a soft cloth.

Dishwasher-safe, top rack only: Personal Jar, Small Batch Jar, Lids, Blade Assembly, Reamer, Juice Container, Pulp Basket, Tamper, and Lid Center Cap. Blender Jar, and Glass Jar can also be washed in the bottom rack.

Check if the Blender is securely plugged into a grounded 3 prong outlet.

If you have a circuit breaker box, make sure the circuit is closed.

It’s a part of the Blender operation to ensure lasting durability. Turn the Control Dial to (0) and repeat the process until desired consistency.

When overloaded or jammed, it will automatically shut off to prevent motor damage. Unplug the Blender. Remove the Jar and use a spatula to rearrange ingredients.

Or, divide contents into smaller batches. For certain recipes, adding liquid in the Jar may also reduce the load.

Unplug the Blender. Remove the Jar and use a spatula to rearrange ingredients in the Jar.

Unplug the Blender. Remove the Personal Jar or Small Batch Jar with the Blade Assembly from the Base. Shake it a little bit. Place it back on the Base, plug in the Blender and turn it back on to continue regular use.

An error is detected in the Blender. Contact an authorized service center for assistance.

10 minutes of no activity will make the Blender go into Sleep mode. To wake up the Blender, press (▷) button.