FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF DOCUMENT.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF USER GUIDE.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF USER MANUAL.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF OWNER GUIDE.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF OWNER MANUAL.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF REFERENCE GUIDE.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF INSTRUCTION GUIDE.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF REFERENCE MANUAL.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF INSTRUCTION MANUAL.
FREE ENGLISH KINETIK WELLBEING PG-IRT1603 (02) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD KINETIK WELLBEING PG-IRT1603 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I set up the KINETIK WELLBEING PG-IRT1603 thermometer for first-time use?
1. Unpack the KINETIK WELLBEING PG-IRT1603 thermometer and insert the batteries.
2. Before using the device for the first time, allow the thermometer to condition at room temperature for 30 minutes.
How do I measure temperature in ear mode with the KINETIK WELLBEING PG-IRT1603?
1. Turn on the KINETIK WELLBEING PG-IRT1603 device.
2. Remove the cap. The thermometer will automatically switch to ear mode, and an ear symbol will be shown on the screen.
3. Insert the thermometer correctly into the ear, adjusting based on the person’s age.
4. Press the measurement button to take the temperature.
How do I measure temperature in forehead mode with the KINETIK WELLBEING PG-IRT1603?
1. Keep the cap on the probe of the KINETIK WELLBEING PG-IRT1603.
2. Turn on the device. A smiley face symbol will appear on the screen, indicating it is ready for forehead measurement.
3. Point the thermometer at the forehead, 0-5mm away from the skin’s surface.
4. Press the measurement button to take the temperature.
How do I measure the temperature of an object with the KINETIK WELLBEING PG-IRT1603?
1. To use the object mode on the KINETIK WELLBEING PG-IRT1603, first ensure the cap is on the device.
2. Press and hold the power button for 6 seconds to switch to object mode.
3. Point the thermometer at the object you wish to measure, keeping it 1-5mm away.
4. Press the measurement button to get a reading.
CLICK HERE TO DOWNLOAD KINETIK WELLBEING PG-IRT1603 (02) PDF DOCUMENT