KAWASAKI ZX1000W (02) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD KAWASAKI ZX1000W (02) PDF MANUAL


PDF Content Summary: Assembly Instructions Model: ZX1000W Description: Crankcase Ring Part Number: 99994-0951 Flat Rate Time(Hr): 0.1 Before you begin, read through these instructions and check that all parts are present. Please note that Kawasaki cannot assume any responsibility for damage resulting from incorrect installation. Kawasaki recommends that all genuine accessories should be fitted by an authorized Kawasaki dealer. The following symbols indicate the information for proper installation and operation in this instruction. NOTE : NOTE indicates information that may help or guide you in the operation or service of the vehicle. ● Indicates a procedural step or work to be done. Refer to the Service Manual (P/No.: 99924-1519-01) for detailed procedures. Parts List No. Component Name Part No. Qty Remark 1 Crankcase Ring (for Clutch Cover) 14093-0571 1 2 Crankcase Ring (for Alternator Cover) 14093-0573 1 © 2016 Kawasaki Heavy Industries, Ltd. Page 1 of 2 Installation Instructions ● Using a high flash-point solvent, clean off any oil or dirt that may be on the clutch cover and alternator cover. Dry them with a clean cloth. ● Peel the release papers [A] in back of the crankcase rings. ● Stick the crankcase ring [1] to the clutch cover [A]. NOTE 🞅 Place the “Kawasaki” mark [B] horizontally. ● Stick the crankcase ring [2] to the alternator cover [A]. NOTE 🞅 Place the “Kawasaki” mark [B] horizontally. P/No. 99958-0221 Page 2 of 2


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply