JVC AV-HQ507115A (01) PDF MANUAL

1. Carefully place the TV screen face-down on a clean, cushioned surface.

2. Insert and secure the stands with the screws provided as shown (2 screws on each side).

65″:Screw size: M5x30mm

55″: Screw size: ST5x30mm

50″: Screw size: M5x30mm.

A button: Scans up/down through the channel list. In the menu system, these act like the up/down direction buttons on the remote and adjust menu controls.

I button: Increases/decreases the volume. In the menu system, these act like the right/left direction buttons on the remote and adjust menu controls.

Power button: Turn the TV on or switch it to standby. When the TV is on, short press it to confirm items; long press it to bring up the menu.

These sockets can be used to connect an USB device for playback or PVR recording. There are 2 USB ports available for this model.

RJ45 plug for connecting to external modem or network access equipment.

This port can be used to connect to the satellite receiver dish.

This socket can be used to connect the outside aerial or cable network.

This output can be used to connect a compatible digital audio receiver.

The HDMI (High-Definition Multimedia Interface) socket can be used to connect a PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder. This socket provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Audio Return Channel (ARC) returns audio though the same HDMI channel that is used to send video to the TV. If switched on, you won’t need a separate audio cable to return sound from the TV. ARC Feature is available on HDMI 1.

Allow you to connect earphones to listen to the sound coming from the TV. When earphones are connected, sound output from the TV speakers is muted. Excessive sound pressure from earphones can cause hearing loss.

The AV IN sockets can be used to connect a range of equipment, including video recorders, camcorders, decoders, satellite receivers, DVD players, or games consoles. The VIDEO IN socket provides composite video connection. Use the adaptor cable included to convert the 3.5mm AV input to RCA inputs.

POWER (On/Standby button) Turns the TV on or switches it to standby.

Mute button: To mute and un-mute the sound.

Home button: Goes to the smart TV homepage.

Quick Access Menu button: Enter into Quick Access Menu.

Direction buttons (up, down, left and right): Highlights different items in the menu system and adjusts the menu controls. Use the Up or Down buttons to go to the next or previous channel under TV source.

OK button: Confirms your selection.

Return button: Exit the menu and return to the previous menu.

Source button: To enter source selection interface.

Mic button: Click to activate voice control and interact with Google Assistant of the TV. (Available only when the network connection is normal.)

SMART button: To enter the Smart Zone (access Enjoy Music, Fast Cast, Sleep Timer, World Clock, Night Mode)

Volume buttons (+/-): Increases or decreases the TV’s volume.

Virtual keyboard button: To activate the virtual keyboard.

Settings menu button: Open the TV settings menu.

NETFLIX button: Goes to the Netflix homepage.

YouTube button: Goes to the YouTube homepage.

Step 1: Press button to enter the home page.

Step 2: Press button to enter the ‘RC pairing’ screen.

Step 3: Press OK and simultaneously to start pairing.

Step 4: The screen will display ‘Pairing…’. When pairing is complete, the screen will display “Success!”.

Step 1: Press button to enter the home page.

Step 2: Press to choose and then press OK to enter.

Step 3: Press to select “Remotes & Accessories” and then choose the Bluetooth remote name to enter next steps.

Step 4: Press unpair and then choose OK button.

Press to go to the smart TV homepage, then move the cursor and select the Smart Player app, click OK to enter. The play/pause/stop and similar functions are accessible through the OK and Direction Arrowbuttons as required. For example, when playing files from a USB device, OK is to play or pause, Left and Right arrows are for Fast Backward and Fast Forward, and Return is to Stop play.

Press OK button of remote control under TV source, then select Subtitle by pressing and press OK to enter.

Press OK button of remote control under TV source, then select Program guide by pressing and press OK to enter.

Press OK button of remote control under TV source, then select Record by pressing and press OK to enter.

Press button of remote control under TV source.

1. Insert two batteries in the remote control. The remote control uses 2 x ‘AAA’ batteries (included).

Precautions on using batteries:

Only use the battery types specified.

Make sure you use the correct polarity.

Do not mix new and used batteries.

Do not use rechargeable batteries.

Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode.

Remove the batteries from the remote control if you are not using it for a long period of time.

2. Connect the power cable FIRST to the television, THEN to a mains socket. (Note: If the power cable is connected to the television, please only connect the power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock.

3. Connect an outside aerial to the ANTENNA IN socket at the back of the TV set.

4. When powered on, the TV will be turned on directly or be in standby. Note: For some models, switch the TV on by pressing the power button.

If the power indicator lights up, the TV set is in standby mode. Press the button on the remote control or on the TV set to turn on the TV.

To put the TV set into standby mode, press the button on the remote control or on the TV, the TV set remains powered up, but with low energy consumption.

To switch off the TV set, unplug the mains socket from the mains outlet. Note: For some models, press the power button to switch off the TV set.

1. Ensure you have:

An ethernet cable long enough to reach your TV

A router or modem with an available Ethernet port

A high-speed internet connection

An Ethernet (LAN) port on the back of the TV

2. Connect your ethernet cable to the router and to the Ethernet port on the back of the TV.

3. Use the Network Settings to configure the TV.

1. Ensure you have:

A router broadcasting a high-speed wireless signal

A high-speed internet connection

2. Use the Network menu to configure the TV.

The first time you switch the set on, the Initial setup screen appears, which guides you through the initial setup process. Follow the on-screen instructions to finish the initial setup process such as selecting the language, connecting to the network, scanning channels, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the setup later from the settings menu.

1. Press to display homepage.

2. Press to select icons from the screen list.

3. Press OK to enter each option.

4. To exit the menu, press.

Select the input source from devices connected to TV through different ports.

Allows you to adjust TV settings.

Press to select, press OK to Enter. This Android TV comes with many popular apps pre-installed for your convenience. You can download more apps from Google Play using this interface.

Using the buttons: press the buttons on the remote control or the corresponding buttons on the TV set to scroll through the channels.

Press in HOME page then press to select your desired source, and then press OK to confirm.

Volume control: press the VOL+/- buttons on the remote control or the corresponding buttons on the TV set to increase or decrease the volume.

Sound mute: press the button to temporarily mute the sound. Press this button again or the VOL+ button to restore the sound.

1. In TV mode, press on the remote control to display the quick access list.

2. Press to select the desired item, then press OK to open the corresponding submenu.

3. In submenu, use and OK buttons to make the adjustments, or use to select an item, use OK to enter and operate according to the on-screen display or guide.

4. Press to return to the previous menu.

Select this option to view TV information.

Enter to adjust picture mode or Advanced settings.

Select this option to adjust the picture size.

Select this option to set the sound adjustments.

To enter TV speaker settings.

Enter to set up HDMI devices for streamlined control.

To setup Analogue or Digital channels.

To setup Primary Preferred Language.

To setup Secondary Preferred Language.

Press to select Channel and Press OK to enter submenu, Press to select Hide/Unhide, edit, delete channels, press OK to confirm.

1. In TV mode, press on the remote control to display the quick access list.

2. Press to select the desired item, then press OK to open the corresponding submenu.

3. In submenu, use and OK buttons to make the adjustments, or use to select an item, use OK to enter and operate according to the on-screen display or guide.

4. Press to return to the previous menu.

Press OK to start the automatic search process. The search may take a few minutes. During the process, you can press and choose YES to exit.

(1)Subtitle Setting: Include off, Basic, Hearing impaired.

(2)Primary Preferred Language: Press OK and then use to select Primary Preferred Language.

(3)Secondary Preferred Language: Press OK and then use to select second Preferred Language.

(1)Press OK and select the Preferred Teletext.

(2)Press OK and select the Decoding page language.

(1)Dialogue Enhancement: Include Off and On.

(2)Dialogue Enhancement Level: Press OK and then use to set Dialogue Enhancement Level.

(3)Audio Description: Include Off and On.

(4)Audio Description Mixing Level: Press OK and then use to set Audio Description Mixing Level.

(5)Audio Type: Include Normal, Hearing impaired and Visual impaired

(6)Primary Preferred Language: Press OK and then use to select Primary Preferred Language.

(7)Secondary Preferred Language: Press OK and then use to select Second Preferred Language.

Press OK to start the automatic search process. The search may take a few minutes. During the process, you can press OK to abort.

Press OK to enter the interface. Press to set program, TV system or color system item, then Press to select Frequency and press OK to search channel.

CEC Control: Go to CEC device list to register new devices.

Device Auto Power Off: Power off HDMI devices with the TV.

TV Auto Power On: Power on the TV with a connected HDMI devices.

CEC Device List: Turn devices on and select ENABLE to enable control of HDMI devices.

Device Control Keys: Pass through additional remote buttons to CEC compatible devices.

Support HDMI Mode: Enhance 4K HDMI signal format.

Adjust the picture size. Use to scroll through the Screen mode preset settings.

Automatically adjusts screen mode based on the signal. Include On and Off.

Adjust overscan display, include on/off.

Optimize picture quality for general content. Use to scroll through the Picture preset settings: Standard, Dynamic, Movie, Sport and Personal.

Access advanced picture enhancing options.

Adjusts the brightness of the picture.

Adjusts the color saturation.

Advanced technique for picture enhancement.

To reset picture adjustment.

Optimize sound quality for general content. Use to scroll through the sound preset settings: Sports, Standard, Cinema, Music and News.

Reproduces life-like surround sound when playing 5.1-channel audio sources. Include On and Off.

Access advanced sound enhancing options.

Keeps the volume level constant for all programs and inputs. Include On and Off.

Adjust the speaker balance.

Applied for PCM only. The volume levels between PCM and compressed audio will differ.

Set the delay time for Digital Audio.

Adjust the sound level of the current input relative to other inputs.

Use to scroll through Surround effect.

Use to scroll through Equalizer.

To return all sound settings to factory default.

Optical out for audio signals from the Digital Audio Out.

Select this option to enter into Audio Only mode.

1. Download Fast Cast mobile app on your smartphone or tablet.

2. Make sure your device and the TV are connected to the same Wi-Fi network.

3. Search for the TV(name:ATV R2) on your device Fast Cast app and connect to it.

The options include: Off, 10Min, 20Min, 30Min, 60Min, 90Min, 120Min, and 180Min.

Enter to add World clock.

Turn on to keep brightness at a lower level at night. This will help to lessen disturbance for others.

Use to scroll through Language.

Enter to set Home or shop mode.

Home mode: Standard picture and sound modes are available in this setting. Choose this option for regular TV viewing at home.

Shop mode: This setting is suitable for a retail environment. In this mode, picture menu settings will not be accessible.

Enter to set E-sticker.

Enter to set Power mode.

Wake on Wifi: Enable wake on WIFI Settings.

Network stand by: Enable wake on Ethernet Settings.

Set the TV to turn off automatically.

Select the inactivity time after which the TV will standby.

Show the system storage size and Memory size.

Press OK button of remote control under TV source, then you can enter channel and select Program Guide, Recorded Programs or Start Recording by using the direction arrows. Press OK to enter your choice.

By pressing the virtual keyboard on the remote control, you can select the day before and the day after.

You can view the video information you are currently recording.

You can see a list of programs that have been scheduled to be recorded.

The recorded programs will be saved in this folder.

Shows the programs that cannot be recorded.

Shows the programs set up for ‘watch alerts’. You can set alerts from Program Guide.

Press OK to start recording and press again to stop. You can choose how long to record the video, for example, record for 10 minutes, 30 minutes, 1 hour, or 3 hours.

Press OK and then use to select the status of subtitle language: off, basic or hearing impaired.

Add your favorite channels to the list.

Press OK and then use to select the status of audio language: English or unknown.

(1)Customise channel list

(2)Parental controls

(3)Audio language

(4)Timeshift config

(5)Select recording storage device

(6)Signal Condition

(7)Open source licenses

(8)Version

Connect a USB device to a USB socket, the screen will show USB file name and then press OK to enter. If no USB device is connected, the USB interface will not be displayed.

1. Select Video icon, then press OK button to view movie file.

2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play.

3. While playing a Video, press OK button of remote to display the play console. For the Play console, Press Ok key of remote to Play and Pause the video file, left key of remote to Fast backward, right key of remote to Fast forward.

4. Use key to see more option: Photo, Scale, Looping mode, Subtitle, Audio track, info, Settings.

5. Press Return key of remote to Stop playing and Press Return to Exit.

1. Select Picture icon, then press OK button to view the picture.

2. Press Up, Down, Left or Right direction button to select your desired picture file and press OK to show.

3. While showing picture, press OK to display the play console. For Previous and Next use remote left and Right key.

4. Use OK key to see more option: Left Rotation, Right Rotation, zoom+, zoom-, Manual play, Information, Play mode, Play interval, BGM: on or off.

1. Select Music icon, then press OK button to listen to Music.

2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play.

3. The Play console includes Previous, Play/Pause, Fast backward/Fast forward, Next.

Press key to see PlayList.

4. Press Return key of remote to Stop playing.

1. Select Disk icon, then press OK button to choose folder.

2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play.

3. Press Return key of remote to Stop playing.

The parameters of file, such as the pixel of picture, code rate of audio and video file, sampling rate of audio file, exceed the limit of the system;

The format of file is not matched or the file is corrupted.

Do not disconnect when the system is reading or transmitting date to avoid damaging the system or the device.

Pay attention to the power supply of the device when you are using a mobile hard disk or a digital camera. If the power supply is not sufficient or not stable, you may encounter problems during operating or can not operate at all. In this case, please restart the device, or unplug the device and plug it again, and ensure that its power supply is normal.

The system supports standard USB1.1 and USB2.0 devices, such as standard USB devices, MP3 players, mobile hard disks, etc.

Use devices compatible with USB 2.0 standard for obtaining better audio and video quality.

Picture interference and menu response delays may occur when playing videos with high compression ratio.

For USB devices with separate power supply like large hard disk drives, it is recommended to use it with its own power supply.

File formats that can be played are as follows:

Music: MP3, AVI, AC3, AAC.

Picture: JPEG/PNG/BMP.

Multimedia: Video/Audio Decoder: H.265, H.264, MPG1/2/4, VP8, VP9.

Video Max: 3840×2160@60Hz.

Check if your TV is connected with the network;

Reboot your TV;

Consult your internet service provider, to confirm if access of your router is supported. Refer to the operation manual of your router.

Make sure that your TV is connected with the router. if the router is well connected and powered on, try to change to a new router and network line, and use your PC to have a test. If the problem persists, please contact Customer Service.

Videos from your USB flash drive – It may result from data transmission, or its code flow is far beyond the supported formats of this TV set.

Videos downloaded from internet, or online videos.

It may be caused by the lower bandwidth of your network. A high network speed is required to handle online videos.

Peak internet usage times may affect the bandwidth.

Check if any other computers on the same network are also operating, as they may be using up bandwidth. Especially if they are downloading or displaying on-line videos.

The video may not be smooth itself, it is not the problem of your TV or network.

All mobile hard disks consume a lot of power, which may result in power supply problems. We recommend inserting only one hard disk, or a low power consumption mobile hard disk.

The audio format of the video in your mobile hard disk is not supported by the TV player.

The formats of the videos may not be supported by the TV, especially videos shot by certain kinds of cameras, generally with their private protocol of formats, which are not compatible with your TV.

Mistakes may occur when videos are copied or compressed, so they may automatically stop playing during playback.

No power cuts when SW updating;

Avoid any operations with your remote control when SW updating;

Be patient because the SW updating process may take quite a while.

Under certain conditions, SW updating may not only update or add new functions but also improve the performance of the TV set, without distinct changes of interface. Also, there may be no changes to the user interface at all.

1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make sure it is working or turned on.

3. Power plug is in a bad contact with the outlet.

4. Check the signal source.

1. Change the color system.

2. Adjust the saturation.

3. Try another channel. Black-white program may be received.

1. Change the batteries.

2. Batteries are not installed correctly.

3. Main power is not connected.

1. Adjust the brightness and contrast.

2. Broadcasting failure may happen.

1. Press the Vol+ button to increase volume.

2. Volume is set to mute, press the mute button to restore sound.

3. Change the sound system.

4. Broadcasting failure may happen.

It is usually caused by local interference, such as cars, daylight lamps, hair dryers or similar. Adjust the antenna to minimize the interference.

If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the reception.

1. Adjust the position and orientation of the indoor/outdoor antenna.

2. Check the connection of antenna.

3. Fine tune the channel.

4. Try another channel. Broadcasting failure may happen.

Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or other electrical appliance.

Ghosts are caused by the television signal following two paths. One is the direct path, the other is reflected from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception.

This interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source.

1. Press the Power button to turn off TV, then press the Power button again to reset TV.

2. Unplug the power cord, then press the Power button to reset TV.

The compatible wall-mount size is VESA 400*200. The screw size for connecting the TV to the wall mount is Pan Head Screw M6x12 (mm).

The compatible wall-mount size is VESA 300*300. The screw size for connecting the TV to the wall mount is Pan Head Screw M6x12 (mm).

1. Wall Mount is not included with the TV; it needs to be purchased separately.

2. Use only VESA-compatible wall mounts according to the specifications recommended for this model. Use of other wall mounts, or inappropriate installation may cause personal injuries or damage to the TV.

3. Please follow all instructions from the user manual of your chosen wall mount.