JVC AA-VC20U (01) PDF MANUAL

JVC AA-VC20U (01) PDF SUMMARY:

What should I read before operating the unit?

Before operating this unit, please read the instructions carefully to ensure the best possible performance.

---

What are some of the important safety instructions?

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

---

What precautions should be taken with the mains plug?

The mains plug should remain readily operable. Remove the mains plug immediately if the camera functions abnormally.

---

What warning is given to prevent fire or shock hazards?

To prevent fire or shock hazards, do not expose this unit to rain or moisture.

---

Where can I find the rating plate, serial number plate, and safety cautions?

• The rating plate and safety caution are on the bottom and/or the back of the main unit.
• The serial number plate is on the bottom of the unit.
• The rating information and safety caution of the AC adapter are on its upper and lower sides.

---

What precautions must be met for the unit and liquids?

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

---

What should I do with the AC adapter when it is not in use?

Remove the AC adapter from the AC wall outlet when not in use. Do not leave dust or metal objects adhered to the AC wall outlet or AC adapter (power/DC plug).

---

What should I do if I am not using the AC adapter for a long time?

When you are not using the AC adapter for a long period of time, it is recommended that you disconnect the power cord from the AC outlet.

---

What should I do if I need to service the unit?

To prevent shock, do not open the cabinet. No user-serviceable parts are inside. Refer servicing to qualified personnel.

---

Can using this equipment cause radio interference?

Operation of this equipment in a residential environment could cause radio interference.

---

How to avoid electric shock or damage when plugging in the AC adapter?

To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord into an AC outlet.

---

How do I connect the power cord and AC adapter?

1. Connect the power plug to the charger.
2. Connect the power cord to the AC adapter and the AC adapter to the socket.

---

How do I charge the battery?

1. Connect the power plug to the charger.
2. Connect the power cord to the AC adapter and the AC adapter to the socket.
3. Attach the battery and charge. Charge only the battery specified in this manual.

---

How do I perform “Fast Charging”?

Attach only one battery. Attaching two batteries during fast charging switches both batteries to the standard charging mode.

---

How do I perform “Standard Charging”?

Attach two batteries. Removing one of the batteries during standard charging switches the other battery to the fast charging mode.

---

What do the different LED statuses indicate during charging?

LED	Status
Lights up in red	Charging
Blinks in red	Charging stops due to error
Lights up in green	Charging is complete

---

How do I remove the battery after charging?

Slide the battery in the direction opposite to the arrow. Lift up and remove.

---

What are the recommended charging times for the batteries?

Battery	Fast Charging / Standard Charging
BN-VC296G	Approx. 260 mins. / Approx. 430 mins.
BN-VC2128G	Approx. 340 mins. / Approx. 510 mins.

---

What should I do if the charging lamp does not light up?

The charging lamp may sometimes not light up for batteries that are recently purchased or have been kept for a long time. In these cases, remove the battery and charge it again.

---

What should I do if the charging lamp blinks during charging?

Ensure you are charging the battery within the temperature range between 0 °C and 40 °C. If the surrounding temperature is too low or high, charging may stop in order to protect the battery.

---

Is it normal for the battery charger to get hot?

Yes, this is not a malfunction.

---

What should I do if the battery is fully charged but the shooting time is short?

Battery life is expiring. Replace the battery.

---

What is the AC adapter input voltage?

AC 100 V to 240 V, 50 Hz/60 Hz.

---

What is DC input?

DC 12 V, 3.0 A.

---

What is the DC output?

DC 8.4 V, 3.4 A / 1.7 A.

---

What is the allowable operating temperature?

0°C to 40 °C (32 °F to 104 °F).

---

What is the mass of the charger?

Approx. 150 g.

---

Which batteries does this charger support?

BN-VC296G, BN-VC2128G. Charge only these batteries.

---

What are the accessories in the box?

Warranty Card (for USA): 1, INSTRUCTIONS: 1, AC Adapter: 1, Power Cord (U model: 1, E model: 2).