Free English JABRA PRO 920 DUO (03) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JABRA PRO 920 DUO (03) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I connect the JABRA PRO 920 DUO with the Jabra Link 14201-40 to a supported Panasonic desk phone?
To connect the JABRA PRO 920 DUO to a supported Panasonic desk phone for remote call control, follow these steps:
1. Connect the AC adapter that is supplied with the headset to the headset base. Connect the other end to an electrical outlet.
2. Unplug the Panasonic handset cord from the desk phone base.
3. Connect the Panasonic handset cord to the headset base socket marked with a handset icon.
4. Connect the modular plug cable that is supplied with the headset to the handset interface on your Panasonic phone. Connect the end with the blue band to the headset base socket that is marked with a phone icon.
5. Connect the Jabra Link 14201-40 EHS cable with the red band to the AUX interface on the headset base. Connect the 3.5 mm plug to the EHS interface on the Panasonic phone.
How do I manually configure the JABRA PRO 920 DUO headset base settings?
If the JABRA PRO 920 DUO headset base requires manual configuration, set the electronic hook switch setting to “IQ” and set the dial tone switch to position “A”.
How do I adjust the microphone volume on the JABRA PRO 920 DUO?
Make a call to the headset. If the volume of your voice is too loud or quiet to the person you are calling, adjust the headset microphone volume until you achieve the optimum level.
CLICK HERE TO DOWNLOAD JABRA PRO 920 DUO (03) PDF DOCUMENT