IHOME XT-14 (01) PDF MANUAL

IHOME XT-14 (01) PDF SUMMARY:

What are the package contents?

The package contains:

• XT-14 True Wireless Earbuds
• Charging Travel Case
• 8 Ear Cushions in 3 sizes (2 Small, 2 Large, 4 Medium)
• USB-C Charging Cable
• Instruction Manual

What are the specifications of the iHome XT-14 True Wireless Earbuds?

• Bluetooth Version: 5.0
• Working distance: 33 ft
• Charge Connector: USB-C
• Speaker Size: <DlO mm
• Frequency Response: 20Hz-20KHz
• Sensitivity: 107 dB +3 dB
• Charging voltage: 5V/1A
• Case Battery: 200 mAh
• Case Charge time: 1.5 hrs
• Earbuds Battery: 2 x 30 mAh
• Standby Time: 120 hours

How do I troubleshoot if the earbuds do not sync with each other?

1. Place the earbuds in the case, then take out the earbuds, ensuring both earbuds are turned on.
2. On each earbud, press and hold the control surface for 5 seconds. The earbud will turn off after the LED flashes purple 3 times.
3. Replace the earbuds in the charging case.
4. Repeat the Getting Started process.

What do I do if the earbuds do not pair to my device?

1. Turn the Earbuds OFF by pressing the control surface on each earbud until the LED blinks red, and then turns off.
2. Replace the earbuds in the case.
3. Turn your device’s Bluetooth® OFF and then back ON. Then repeat the pairing process.

How do I charge the earbuds?

1. Replace the earbuds in the case.
2. Connect the USB-C charging cable to the charging port on the back of the case.
3. Plug the cable into a standard USB 5V/1A or higher power output.

When you plug the case into a charger, the indicator lights will flash to show that the battery is charging, and glow steady to indicate the battery is charged. The lights on the buds in the case glow steady red, indicating they are charging. The lights on the buds will go out when fully charged or the case is unplugged from the power source. When fully charged, promptly unplug the charge case from the power source. If want to charge the earbuds from the charge case internal battery, simply replace them in the case. They will begin charging from the built-in case battery.

What is the “Getting Started” process?

Before using this device, fully charge it. Charging instructions can be found on page 6. Open the charging case and take out the earbuds. Both LED lights will flash red and blue until one of the earbuds flashes red and blue, while the other earbud flashes blue, indicating that the right and left earbuds have synced to each other.

How do I pair the earbuds to my device?

1. Go to Bluetooth® Settings on your mobile device.
2. Turn Bluetooth® ON, on your device.
3. On your Bluetooth® device, select “iHome XT-14” from the list of available devices.
4. The earbud indicator LEDs will shut off to indicate they are connected.

What are the warnings I should be aware of?

• Do not use this unit for anything other than its intended use.
• Do not puncture, throw, drop, bend, or modify this product.
• Do not throw this product into fire or water.
• Do not short-curcuit the battery with any metal or metallic objects.
• Do not expose this product to corrosive liquids such as salt water.
• Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
• Do not allow children to play with this product as it is not a toy, and may present a choking hazard.
• Avoid leaving your device in direct sunlight, such as on the dashboard, console, or seat of a vehicle.
• Do not leave your device, or use your device, in any area where the temperature is likely to drop below 32°F, or may exceed 140°F, such as inside a closed vehicle on a hot day.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Protect your hearing by always listening at a safe level. Prolonged use at elevated volumes may affect your hearing capacity and could result in hearing loss.
• Use the earbuds with this charging case only.
• To avoid damage to the charging case, please only use a USB 5V/1A or higher charger.
• In order to ensure the battery life, charge normally at least once a month.

What are the basic functions of the earbuds?

Right Earbud:

• Double tap the control surface to play or pause the audio.
• Tap and hold one second to skip to the next audio track.
• Single tap to raise the volume.

Left Earbud:

• Double tap the control surface to play or pause the audio.
• Tap and hold one second to skip to the previous audio track.
• Single tap to lower the volume.

Phone calls: When there is an incoming call, the unit will pause the playback and ring to alert you of the call. Phone call functions work the same on either of the earbuds. To answer an incoming call, single tap the control button of either earbud. To end a call, double tap the control surface. To reject an incoming call, tap and hold the control surface.

What does the warranty cover?

Bytech NY INC. warrants this product to be materially free from defects and workmanship to the original purchaser for a period of 12 months from the original purchase date. Bytech responsibility with regard to this limited warranty shall be limited solely to repair or replacement at its option, of any product which fails during normal consumer use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. At any time during the 12 months period following the purchase, the product fails due to defects in material or workmanship, return the defective product (with freight prepaid) with proof of purchase.