Free English IEGEEK ZS-GQ5 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD IEGEEK ZS-GQ5 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How should I connect the IEGEEK ZS-GQ5 to my camera or doorbell?
Do not remove the entire rubber plug from the camera or doorbell to connect the power cable. Simply remove the small rubber section aligned for the cable to connect it. This method will provide a better waterproof seal.
How should I install the IEGEEK ZS-GQ5 for optimal performance?
Choose the best installation location to ensure the IEGEEK ZS-GQ5 receives sufficient sunlight. It is recommended to place the solar panel horizontally, then tilt it toward the south (or toward the north if your location is in the southern hemisphere). The tilt angle is determined by your local latitude. For example, if your local latitude is 55 degrees North, tilt the IEGEEK ZS-GQ5 toward the south at a 55 degree angle.
Why does the IEGEEK ZS-GQ5 sometimes fail to charge my device?
During cloudy weather, in the shade, or in the mornings and evenings, the current from the IEGEEK ZS-GQ5 is low due to insufficient sunlight. If the charging current falls below 50mA, the camera will not charge. This is a normal phenomenon. Once there is sufficient sunlight, the IEGEEK ZS-GQ5 will resume charging the camera.
Additionally, if the camera is frequently triggered by motion or if you view the live video frequently, the camera consumes power very rapidly. In cases where power consumption is greater than the charge volume, the IEGEEK ZS-GQ5 cannot supply enough energy to the camera, and you will need to use a power adapter to charge it.
Why is the charge status icon not appearing immediately after connecting the IEGEEK ZS-GQ5?
When you connect the IEGEEK ZS-GQ5 to your camera, the charge status icon may not display immediately. Please exit the current interface and enter the live video interface, and the charge icon will appear.
What can affect the efficiency of the IEGEEK ZS-GQ5?
The IEGEEK ZS-GQ5 may not keep your camera or doorbell fully charged during snowy, cloudy, dark, or rainy days, or during periods of intensive use such as frequent access or constant triggering. External factors like shade, temperature, weather conditions, and the amount of dust or debris on its surface can also affect the efficiency of the IEGEEK ZS-GQ5 in producing electricity.
How can I optimize the efficiency of the IEGEEK ZS-GQ5?
You can optimize the efficiency of the IEGEEK ZS-GQ5 by following these steps:
1. Mount the IEGEEK ZS-GQ5 in well-lit areas and avoid locations like the shade of trees, buildings, or other obstacles to ensure sufficient sunlight.
2. Adjust the direction of the IEGEEK ZS-GQ5 to face true south (in the northern hemisphere) or true north (in the southern hemisphere) and tilt it at the appropriate angle for your latitude to ensure maximum sun exposure.
3. Regularly wipe the surface of the IEGEEK ZS-GQ5 with a damp cloth to remove dust and debris.
CLICK HERE TO DOWNLOAD IEGEEK ZS-GQ5 (01) PDF DOCUMENT