Free English HYGGER HG130 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HYGGER HG130 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the safety warnings for using the HYGGER HG130 circulation and wave pump?
When using the HYGGER HG130, please adhere to the following warnings:
1. To ensure performance, do not let the pump run dry.
2. Be careful when assembling the magnet base. Move the magnet base parallelly to the outside wall of the fish tank to prevent it from breaking.
3. Do not immerse the plug into water or other liquid.
4. Do not allow children or inexperienced people to operate or play with the product alone without safety supervision.
What are the features of the HYGGER HG130 circulation and wave pump?
The HYGGER HG130 has the following features:
• Adjustable flow direction to different angles according to the needs.
• Adjustable flow rate according to the needs.
• High performance motor, low noise.
• Unique anti-reversal design.
• Wear-resistant ceramic shaft, suitable for fresh and salt water.
• Feeder function: The wave maker with a switch can be turned off when you feed the fish.
What are the product specifications for the different HYGGER HG130 models?
| Model | HG130-3000 | HG130-6000 | HG130-10000 |
|---|---|---|---|
| Power (W) | 4W | 6W | 12W |
| Volt/Freq | US standard: AC 110-120V/60Hz EU/UK/AU standard: AC 220-240V/50Hz |
||
| Flow rate (GPH) | 792GPH (3000L) | 1585GPH (6000L) | 2378GPH (9000L) |
| Recommend tank size | 3-15Gal (11~56L) | 16-105Gal (60L~397L) | 42-190Gal (159L~720L) |
| Recommend glass thickness | ≤0.315″ (8MM) | ≤0.39″ (10MM) | ≤0.47″ (15MM) |
How do I install the HYGGER HG130 pump in my aquarium?
1. Remove the rear magnet base from the bottom of the pump.
2. Place the pump at the center of the inner tank wall and hold it with one hand.
3. Shift the rear magnet base along the outside wall to the same position with the other hand to fix the pump. Caution: Be careful of fingers being clamped due to strong magnetism.
4. Plug in the power supply. The pump can start working.
How do I clean and maintain my HYGGER HG130 pump?
Clean the pump regularly to ensure performance. Follow these steps for cleaning:
1. Take off the pump base.
2. To open the pump, hold the plastic nail with your right hand and pull it to the right, while holding the front cover with your left hand and pulling it to the left.
3. Use a soft cloth to clean the impeller and clean the pump with clear water.
4. To reassemble, align the ceramic port, then insert it into the plastic cover.
How should I arrange the power cord for the HYGGER HG130 for safety?
The power cord of the pump must be positioned below the power socket to form a drip loop. This prevents water from flowing into the power socket along the power cord.
What is included in the HYGGER HG130 package?
The package includes:
• 1 × Wave pump
• 1 × User manual
How should I dispose of the HYGGER HG130?
Please do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product should not be put together with domestic waste. It should be taken to an authorized place for recycling of electrical and electronic appliances. Please consult with your local seller to make sure the product is disposed of in an environmentally friendly way.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD HYGGER HG130 (01) PDF DOCUMENT