HBM MACHINES H134668 (01) PDF Document

Before setting up, assembling, and using the HBM MACHINES H134668, it is essential to read and understand the instruction manual thoroughly. Failure to do so may result in personal injury or damage.

Ensure the following safety precautions are met:

• Ensure that the appliance is connected to a power supply matching the voltage and frequency specified on the product label.

• Do not use the appliance near water or in areas with high humidity to avoid the risk of electric shock.

• Use the appliance only in well-ventilated areas.

• Do not insert fingers, objects or any materials into the fan grille or moving parts, as this may cause injury or damage.

• Do not operate the appliance with a damaged cord or plug.

• Ensure that the appliance is switched off from the supply mains before removing the guard.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The HBM MACHINES H134668 mobile fan is designed for industrial indoor use only. Its purpose is to provide air circulation in controlled environments such as workshops, warehouses, and production areas. Do not use this appliance for any purpose other than its intended use. Other use is considered unauthorized.

• The appliance must not be used in outdoor or wet environments.

• The appliance should only be operated on a stable and level surface.

The HBM MACHINES H134668 consists of the following parts:

To unpack your HBM MACHINES H134668, follow these steps:

1. Carefully open the box and remove all packing materials, such as bubble wrap or foam inserts. Dispose and recycle the packing materials responsibly.

2. Thoroughly inspect the appliance for any visible damage, scratches or defects. Verify that all expected parts and accessories are present.

To assemble the HBM MACHINES H134668, use an adjustable wrench to tighten the wheels (7) on both sides of the left side of the appliance.

To switch the HBM MACHINES H134668 on or off:

1. Place the appliance on a stable, level surface to prevent tipping.

2. Connect the appliance to a power source matching the specified voltage and frequency.

3. Set the power knob (8) to the desired setting:

For optimal operation of your HBM MACHINES H134668, please consider the following tips:

• Make sure that the air intake and the exhaust openings remain unobstructed for proper airflow.

• Keep the appliance at least 50 cm away from walls, curtains or objects that may restrict airflow.

• Avoid using the appliance in areas with excessive dust.

After use, switch off the fan and unplug it from the power source.

To prevent electric shock, always unplug the HBM MACHINES H134668 before cleaning. Do not immerse the electrical parts of the appliance in water or other liquids, and never hold it under running water.

Avoid using harsh or abrasive cleaners, solvents, scouring pads or scrubbers that can damage the surfaces, remove protective coatings or cause corrosion when cleaning the appliance.

To clean your fan:

1. Use a suitable screwdriver to remove the grilles.

2. For regular cleaning of the grilles, use a damp cloth or vacuum cleaner with a brush attachment to remove any dirt. If the grilles are heavily soiled, wash them in warm soapy water and scrub with a soft brush.

3. For regular cleaning of the fan blades, use a soft brush or cloth to remove loose dust and dirt. For greasy or sticky buildup, wipe the blades with a damp cloth and mild detergent or degreaser.

4. Clean the stand and drum with a soft damp cloth.

5. Dry all parts thoroughly before reassembly to prevent rust or residue buildup.

To properly store your HBM MACHINES H134668, follow these guidelines:

• Thoroughly clean the appliance, removing dirt, debris, and any residual substances. Make sure all parts are dry to prevent corrosion or damage during storage.

• Store the appliance in a clean, dry, and well-ventilated area. Avoid damp, humid, excessively hot, or direct sunlight locations.

• Ensure the appliance is stored in a secure location, away from unauthorized access to children and pets.

• Wrap the supply cord neatly and avoid sharp bends or kinks that could lead to wire breakage or electrical hazards.

• Place the appliance on a flat, stable surface.

• Cover the appliance with a suitable cover to protect it from dust and debris.

• Periodically check the stored appliance to ensure it remains in good condition. Inspect for any signs of damage, corrosion, or pests and address any issues promptly.

Securely fasten the appliance to prevent any movement during transportation. Use appropriate straps, tie-downs, or braces to hold the appliance in place and avoid damaging it or the vehicle.

Product Disposal:

The HBM MACHINES H134668 must be disposed of separately from ordinary household waste at the end of its life. It is the owner’s responsibility to dispose of electrical and electronic waste at recycling centers to conserve natural resources.

Packaging/packing materials disposal:

• Dispose of cardboard and paperboard packaging by submitting them to the recycled paper service or waste paper collection. Check with local recycling facilities for specific guidelines.

• Dispose of wrapping materials, inserts, straps, and other plastic packaging by checking with local recycling facilities for specific guidelines on recycling or waste disposal methods. Follow their instructions to ensure proper disposal and promote environmental sustainability.