HBM MACHINES H134667 (01) PDF Document

Before setting up, assembling, and using the HBM MACHINES H134667, it is essential to read and understand the instruction manual thoroughly. Failure to do so may result in personal injury or damage.

Ensure the following safety precautions are met:

• Ensure that the appliance is connected to a power supply matching the voltage and frequency specified on the product label.

• Do not use the appliance near water or in areas with high humidity to avoid the risk of electric shock.

• Use the appliance only in well-ventilated areas.

• Do not insert fingers, objects or any materials into the fan grille or moving parts, as this may cause injury or damage.

• Do not operate the appliance with a damaged cord or plug.

• Ensure that the appliance is switched off from the supply mains before removing the guard.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The HBM MACHINES H134667 mobile fan is designed for industrial indoor use only. Its purpose is to provide air circulation in controlled environments such as workshops, warehouses, and production areas.

Do not use the appliance for any purpose other than its intended use. Other use is considered unauthorized.

Key points for intended use:

• The appliance must not be used in outdoor or wet environments.

• The appliance should only be operated on a stable and level surface.

Keep packaging materials away from children and pets to avoid suffocation risks.

1. Carefully open the box and remove all packing materials, such as bubble wrap or foam inserts. Dispose and recycle the packing materials responsibly.

2. Thoroughly inspect the appliance for any visible damage, scratches or defects. Verify that all expected parts and accessories are present and report any damages or missing components to our customer service team.

To assemble the HBM MACHINES H134667, use an adjustable wrench to tighten the wheels (7) on both sides of the left side of the appliance.

To switch the fan on and off:

1. Place the appliance on a stable, level surface to prevent tipping.

2. Connect the appliance to a power source matching the specified voltage and frequency.

3. Set the power knob (8) to the desired setting:

• Make sure that the air intake and the exhaust openings remain unobstructed for proper airflow.

• Keep the appliance at least 50 cm away from walls, curtains or objects that may restrict airflow.

• Avoid using the appliance in areas with excessive dust.

After use, switch off the fan and unplug it from the power source.

To prevent electric shock, unplug the appliance before cleaning. During cleaning, do not immerse the electrical parts of the appliance in water or other liquids. Never hold the appliance under running water.

Avoid using harsh or abrasive cleaners, solvents, scouring pads or scrubbers that can damage the surfaces, remove protective coatings or cause corrosion when cleaning the appliance.

1. Use a suitable screwdriver to remove the grilles.

2. For regular cleaning of the grilles, use a damp cloth or vacuum cleaner with a brush attachment to remove any dirt. If the grilles are heavily soiled, wash them in warm soapy water and scrub with a soft brush.

3. For regular cleaning of the fan blades, use a soft brush or cloth to remove loose dust and dirt. For greasy or sticky buildup, wipe the blades with a damp cloth and mild detergent or degreaser.

4. Clean the stand and drum with a soft damp cloth.

5. Dry all parts thoroughly before reassembly to prevent rust or residue buildup.

• Thoroughly clean the appliance, remove dirt, debris and any residual substances. Make sure all parts are dry to prevent corrosion or damage during storage.

• Store the appliance in a clean, dry and well-ventilated area. Avoid storing the appliance in areas that are damp, humid, excessively hot or exposed to direct sunlight.

• Make sure the appliance is stored in a secure location, away from unauthorised access to children and pets.

• Wrap the supply cord neatly and avoid sharp bends or kinks that could lead to wire breakage or electrical hazards.

• Place the appliance on a flat, stable surface.

• Cover the appliance with suitable covers to protect it from dust and debris.

• Periodically check on the stored appliance to ensure it remains in good condition. Inspect for any signs of damage, corrosion or pests. Address any issues promptly to prevent further damage or deterioration.

Securely fasten the appliance to prevent any movement during transportation. Use appropriate straps, tie-downs or braces to hold the appliance in place and avoid damaging it or the vehicle.

The Waste Electrical and Electronic Equipment (WEEE) directive aims to minimise the impact of electrical and electronic goods on the environment and human health. The symbol on this product and its packaging signifies that this product must be disposed separately from ordinary household waste at the end of its life. It is the responsibility of the owner to dispose of electrical and electronic waste at recycling centres in order to conserve natural resources. Each country has its collection centres for electrical and electronic waste. For information about recycling drop off areas, contact the local electrical and electronic equipment waste management authority, the local city office or the household waste disposal service.

Sorting and disposing of packaging materials correctly is essential for environmentally friendly waste management. The packaging is designed to protect the appliance during transit and is made of materials that can be recycled.

• Dispose of cardboard and paperboard packaging by submitting them to the recycled paper service or waste paper collection. Check with local recycling facilities for specific guidelines on recycling cardboard and paperboard.

• Dispose of wrapping materials, inserts, straps and other plastic packaging by checking with local recycling facilities for specific guidelines on recycling or waste disposal methods. Follow their instructions to ensure proper disposal and promote environmental sustainability.