HARMAN-KARDON ONYX STUDIO 7 (01) PDF MANUAL

HARMAN-KARDON ONYX STUDIO 7 (01) PDF SUMMARY:

Before using this product, read the safety sheet carefully.

Before using this product, read the safety sheet carefully. This is a standard safety precaution that the user should always follow before operating any new electronic device. This ensures that you are aware of any potential risks associated with using the device and how to avoid them. The manufacturer is recommending that users familiarize themselves with the specific safety guidelines before use.

---

What varies by region?

Power cord quantity and plug type vary by regions. This means that depending on the country you purchased the device from, the power cord and plug will be different to match local standards.

---

What are the different states of the speaker’s battery and charging?

The speaker can display Low battery, Charging in progress, and Charging complete. This is helpful for the user to understand the battery level of the speaker and whether it is currently charging.

---

What are the different states of the speaker’s Bluetooth connection?

The speaker can display Bluetooth connecting, Bluetooth connected, and Bluetooth not connected. These states are important for the user to know if the device is successfully paired to another Bluetooth device, and if not, what is its current state.

---

What does “Reboot” mean and how do you do it?

Reboot means reset and you do it by pressing the power button for over 10 seconds. This is a troubleshooting step that can resolve potential issues. This action effectively restarts the speaker.

---

What is the maximum number of devices that can be connected to the speaker?

Maximum 2 devices can be connected. This limitation is important for the user to know in order to avoid connection issues with multiple devices attempting to connect at the same time.

---

What is Wireless Dual Sound pairing mode?

Wireless Dual Sound pairing mode is a feature that allows you to pair two speakers together. These are sold separately. This indicates that the user can enhance their listening experience using two speakers instead of just one for a more immersive audio experience.

---

What does it mean when the Wireless Dual Sound is connected?

When Wireless Dual Sound is connected, it will indicate Left & Right, Left Left & Right, or Right. This shows the speaker configuration when two speakers are wirelessly connected. It lets the user know if the speaker is functioning as the left channel, the right channel, or both.

---

How do you control playback on the primary speaker?

Control playback on the primary speaker by pressing once to start or pause music playback and press twice to skip to the next music track. This provides the user with a simple method of controlling their music using the speaker’s built-in controls.

---

What happens when you start music playback on a second connected device?

Music playback pauses on the current connected device when you start music playback on a second connected device. This means that the speaker will only play music from one connected device at a time, and if another device starts playing music, the first device will be paused.

---

How do you play music through the audio cable?

To play music through the audio cable, disconnect Bluetooth. The audio cable is not included. This means that when the user wants to play music through the auxiliary port, they must first disconnect the Bluetooth connection, and also that the audio cable is not provided with the speaker and must be purchased separately.

---

What are the different states of the speaker’s battery, charging, and bluetooth connection?

The speaker can display Low battery, Charging in progress, Charging complete, Bluetooth connecting, Bluetooth connected, and Bluetooth not connected. This is a summary of all the indicator states that the device can display related to its power and connectivity.

---

What is the Bluetooth version of the speaker?

The Bluetooth version is 4.2. This is important for compatibility, and means that the user may need to verify their devices are compatible.

---

What Bluetooth profiles does the speaker support?

The speaker supports A2DP 1.3 and AVRCP 1.6. These are Bluetooth profiles that enable audio streaming and remote control functions respectively.

---

What are the transducers of the speaker?

The speaker has a Woofer 1 x 120mm and Tweeter 2 x 25mm. These are the speaker driver sizes. A woofer handles the lower range of frequencies (bass) and the tweeter is for higher frequencies.

---

What is the rated power of the speaker?

The rated power is 1 x 50W RMS Bi-amp (AC mode). This indicates the amount of power that the speaker can output when connected to a power outlet, which will impact how loud the speaker can get and how well it can produce high-fidelity sound.

---

What is the frequency response of the speaker?

The frequency response is 50Hz – 20kHz (-6dB). This is the range of frequencies that the speaker is capable of reproducing, from low bass at 50Hz to high treble at 20kHz, which represents a standard frequency response range for audio devices.

---

What is the signal to noise ratio of the speaker?

The signal to noise ratio is 80dB A-weighted. This specifies the level of desirable sound in comparison to the amount of background noise or hiss. A higher signal to noise ratio means the speaker can produce a clearer sound.

---

What is the power supply of the speaker?

The power supply is 19V/2A. This tells the user what kind of power adapter is required to charge or power the device.

---

What type of battery does the speaker have?

The speaker has a Lithium-ion battery (3.6V/3250mAh, 11.70Wh). This is the battery type that is used to power the device.

---

What is the battery charge time of the speaker?

The battery charge time is 5 hours. This lets the user know how long it will take to fully charge the battery from empty.

---

What is the music playtime of the speaker?

The music playtime is up to 8 hours and varies by volume level and music content. This gives the user an idea of how long they can use the speaker on a full charge, but it is also important to note that the music playtime can vary depending on factors such as music volume and the type of music being played.

---

What is the Bluetooth transmitter power of the speaker?

The Bluetooth transmitter power is < 9dBm (EIRP). This is the power output of the device’s Bluetooth transmitter.

---

What is the Bluetooth transmitter frequency range of the speaker?

The Bluetooth transmitter frequency range is 2400-2483.5MHz. This is the range of radio frequencies that the device uses for Bluetooth communication.

---

What is the Bluetooth transmitter modulation of the speaker?

The Bluetooth transmitter modulation is GFSK, π/4 – DQPSK, 8DPSK. This refers to the method used to encode the data on the Bluetooth signal.

---

What are the dimensions of the speaker?

The dimensions are (H x W x D): 268.00 X 302.50 X 159.50mm. This provides the user with physical dimensions to better understand the speaker size.

---

What is the weight of the speaker?

The weight is 3295g. This information allows the user to know how heavy the speaker is, which can help determine its portability.

---

What should you do if the speaker will not be used for a long period of time?

If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. This is a maintenance recommendation to ensure the device’s battery health and longevity.