Free English HARIO V60 DRIPPER NEO (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HARIO V60 DRIPPER NEO (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do after purchasing the HARIO V60 DRIPPER NEO?
Thank you for purchasing this HARIO product. Please be sure to read this instruction manual thoroughly prior to use. After reading the manual, store it in a safe place for future reference.
What are the product features of the HARIO V60 DRIPPER NEO regarding water flow?
The 72 ultra-fine spiral ribs evenly spread hot water, and the ribs converge to 9 near the extraction port to prevent over-extraction. This product realizes a structure that allows sweetness and the sensation of transparency to stand out while reducing unpleasant tastes.
How do I assemble and disassemble the body and base of the HARIO V60 DRIPPER NEO?
Assemble and disassemble the body and base as shown in the diagram.
For disassembly: It is easier to remove the base if you hold the top of it with your thumb and index finger.
For assembly: This is done with turning the base.
What are the materials used for the HARIO V60 DRIPPER NEO and their heat resistance temperatures?
The materials for the HARIO V60 DRIPPER NEO are as follows:
Body: PCT resin (Tritan) (Heat resistance temperature: 100℃)
Base: Silicone rubber (Heat resistance temperature: 180℃)
What are the steps for brewing coffee using the HARIO V60 DRIPPER NEO?
Step 1: Fold the paper filter along the seams and place inside the dripper. Add coffee grounds (medium-fine grind) for your required servings and shake it lightly to level. 10-12g is normally good for one serving(120mL). Using freshly ground coffee is recommended.
Step 2: Take the boiling water off the flame, and wait for the water to settle. Pour hot water slowly to moisten the grounds from the center outward, while moving in a circular pattern. Wait for about 30 seconds.
Step 3: Slowly start adding more water using the same speed and swirling motion as before, making sure the water does not come into direct contact with the paper filter. Brewing time should be within 3 minutes. Please use HARIO V60 Coffee Paper Filter.
What precautions should be taken when using the HARIO V60 DRIPPER NEO?
Do not allow children to use this product. Do not use near children, and store out of reach of children.
Wash the product before using for the first time.
If the product becomes damaged, please handle any broken pieces with care.
Follow local rules on garbage disposal when disposing of this product.
Do not store resin products near heat or open flame.
Make sure the body and base are securely in place before use.
What is the recommended way to clean the HARIO V60 DRIPPER NEO?
Use a soft sponge and neutral detergent to clean this product.
This product is dishwasher safe. Be sure to read the instruction manual provided with your dishwasher before use.
Use diluted household bleach for deep cleaning. Make sure to follow all precautions indicated on the bleach and wash thoroughly with water when finished.
CLICK HERE TO DOWNLOAD HARIO V60 DRIPPER NEO (01) PDF DOCUMENT