GOOLOO GP37-PLUS (01) PDF Document

Free English GOOLOO GP37-PLUS (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD GOOLOO GP37-PLUS (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

What are the components and parts of the GOOLOO GP37-PLUS?

The GOOLOO GP37-PLUS features the following components:

Indicator Light

Power Switch

LED Flash Light

5V/2.4A USB Output Port

12V/10A Output Port

15V/1A Input Port

Jump Start Socket

The package includes the following parts:

Part Name	Quantity
Host	1
Smart Jump Cable	1
Quick Charge Micro USB Cable	1
Home Adapter	1
Car Adapter	1
Kit Bag	1
User Manual	1

How do I check the battery level of the GOOLOO GP37-PLUS?

Press the switch to check the storage level. The indicator light will flash one by one during the period of charging. Different numbers of solid indicators show different storage levels. All indicator lights will go off automatically when the charging is paused or completed.

1 Solid	2 Solid	3 Solid	4 Solid
25%	50%	75%	100%

How do I charge the GOOLOO GP37-PLUS?

There are two ways to charge the GOOLOO GP37-PLUS:

1. Charged by Home Adapter

1. Plug the home adapter into the universal socket.

2. Connect the 15V/1A input port of GP37-Plus to the other end of the home adapter.

2. Charged by Car

1. Plug the car adapter into the socket of the cigarette lighter.

2. Connect the other end of the car adapter to the 15V/1A input port.

What is the complete procedure for jump starting a car with the GOOLOO GP37-PLUS, and what do the smart cable indicator lights mean during the process?

If you have not used the GOOLOO GP37-PLUS for more than two months, you should charge it first. It is recommended to have more than 60% charge before jump starting.

1. Connect the smart jump cable to the jump starter.

2. Connect the red clamp to the positive terminal “+” of the car battery and the black clamp to the negative terminal “-” of the car battery.

3. Operate following the instruction of the Cable Indicator:

Green Light On: The connection is correct and the circuit is working. You can turn on the engine to start directly.

Red Light On with Buzzing: The connection is wrong. DO NOT start the engine. Disconnect the clamps and reconnect it properly as described above until the green light is on.

Green Light Blinking: The vehicle battery is low. Press the “BOOST” button. When the Green Light becomes solid, start the engine within 30 seconds.

No Light on: The vehicle battery might be damaged. Confirm the clamps connection, press the “BOOST” button, wait for the Green Light to become solid, then start the engine within 30 seconds.

4. Once the car is started, remove the plug from the jump starter.

5. Remove the clamps from the battery.

How do I use the LED flash light on the GOOLOO GP37-PLUS?

Press the LED Flash Light Switch 3 seconds to turn on the light. Press slightly to switch 3 lighting modes: Flash light, Strobe light, SOS signal. Press and hold the light switch for 3 seconds to turn off the light. Also use this switch to check the storage level.

What are the technical specifications for the GOOLOO GP37-PLUS?

Input	15V/1A
Output	12V Jump Start/5V/2.4A,9V/2A,12V/1.5A(QC3.0), 12V/10A
Capacity	18000mAh/66.6Wh
Start Current	400A
Peak Current	800A
Size	6.9731.57(inch)
Weight	1.34lb
Operating Temp & Charge Temp	-20℃ – 40℃ / -4℉ – 104℉
Lifetime	>1000 Cycles
Full Charging Time	5 hours

What should I do if my GOOLOO GP37-PLUS is not working correctly?

Finding	Cause	Remedies
GOOLOO GP37-Plus cannot be charged while its 5 indicator lights are solid.	100% Charging for longer time when no usage.	Unplug the adapter and plug it again.
No response when pressing the switch button.	Low voltage because it hasn’t started.	Plug the adapter into 15V/1A input port to activate the main.

What should I do if my GOOLOO GP37-Plus will not start my car?

If your GOOLOO GP37-Plus will not start a car, try the following steps:

1. Reconnect the clamps to the car battery.

2. Ensure the device is fully charged.

3. If it still does not work, try it again. Make sure to wait 10 seconds between each jump attempt.

Can the GOOLOO GP37-Plus charge other devices while starting a car?

No.

How long does the storage of battery for the GOOLOO GP37-PLUS remain?

The battery can hold its charge for up to 3 months. However, we suggest you recharge it every 1-2 months.

What should I do if my GOOLOO GP37-Plus cannot be charged?

If you are using a different charging cable to charge again and it does not work, check if the GOOLOO GP37-Plus is the problem.

What should I do if there is no response when pressing the switch button on the GOOLOO GP37-Plus?

A low voltage battery may be the reason. Plug the adapter into the 15V/1A input port to activate.

What are the safety warnings for using the GOOLOO GP37-PLUS?

1. Read the instruction manual carefully before using this unit.

2. Use for 12V vehicles only. It would be a hazard if for other jumping. It is forbidden to use for other machines such as airplane, ship and so on.

3. Caution while using this unit.

4. Do not use the unit if any cable clamp or cord is damaged.

5. Do not use as a car battery.

6. Do not use as a battery charger.

7. Do not remain the unit on the battery after cranking the engine start.

8. Use the jumper cable provided with this unit only.

9. Make sure the blue plug of the jump cable is plugged fully into the jumping socket, otherwise, the blue plug would be melted.

10. Make sure all the battery connections are clean and the battery clamps are well connected. Do not jump start the car if the battery terminals are dirty or corroded.

11. Do not jump start the engine for more than 3 times in 2 minutes. The unit will be lessness.

12. Do not crank the engine for more than 3 times in a row. It could damage the unit by overheated. Give two minutes between attempts. If the engine crank, it can become overheat and detach as a safety measure.

13. Remove the product from the vehicle battery within 30s after starting the engine. If not, it could lead to damage.

14. Do not connect the two clamps together.

15. Do not jump start vehicle when indicator lights are illuminated.

16. Do not used by young or infirm persons without supervision.

17. Do not use as a toy.

18. Do not allow the product to become wet.

19. Do not immerse the product in water.

20. Do not operate the product in an explosive atmosphere, such as in the presence of flammable liquids, gases or dust.

21. Do not modify or disassemble the unit. Only a repair technician may repair this unit.

22. Do not expose product to extreme heat or fire.

23. Make sure someone should be within range of your voice or close enough to come to your aid when working with batteries.

24. Remove personal metal items like rings, bracelets, necklaces, etc. when using this unit.

25. Do not drop unit. If unit receives a sharp blow or is otherwise damaged in any way, have it checked by a battery technician.

26. Do not store in locations where the temperature may exceed 70 C.

27. Charge only at ambient temperature between 0 C and 45 C.

28. Do not charge the unit using the charger provided with this unit.

29. If this unit has a battery leak, the contact with soap and water immediately. If the liquid contacts with the eyes, wash the eyes with cold water for at least 10 minutes and get medical treatment immediately.

30. The unit contains the lithium based batteries, at end of its useful life, dispose the unit according to local regulation.

What are the main usage precautions for the GOOLOO GP37-PLUS?

Do Not Submerge In Water

Do Not Disassemble

Do Not Dropping

Avoid Extreme Temperatures

Do Not Place Near or Into Fire

Overcharge Protection

Fuse Protection

Against Reverse Plug

What is the composition and amount of toxic or harmful substances in the GOOLOO GP37-PLUS?

	Pb	Hg	Cd	Cr(VI)	PBB	PBDE
Composition and amount of toxic or harmful substance in GP37-Plus	O	O	O	O	O	O

O: Indicate that the content of its harmful substances in all homogeneous materials is all lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHs)