Free English GOODWE 4G KIT-G20 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GOODWE 4G KIT-G20 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What important guidelines should I follow when installing and operating the GOODWE 4G KIT-G20?
Please adhere to the following guidelines:
• The information in the quick installation guide is subject to change due to product updates or other reasons. This guide cannot replace the product labels or the safety precautions in the user manual unless otherwise specified. All descriptions here are for guidance only.
• All operations should be performed by trained and knowledgeable technicians who are familiar with local standards and safety regulations.
• Strictly follow the installation, operation, and configuration instructions in this guide and user manual. The manufacturer shall not be liable for equipment damage or personal injury if you do not follow the instructions.
How do I install the GOODWE 4G KIT-G20?
There are two installation types, Type I and Type II, depending on the inverter model.
Type I Installation:
1. Ensure the communication module is correctly aligned with the port on the inverter.
2. Plug the module into the inverter’s USB port.
3. Rotate the buckle to lock the module in place.
Type II Installation:
1. Use the provided tool to press the side of the cover and remove it.
2. Insert the Micro SIM card (15mm x 12mm) into the card slot as indicated.
3. Re-install the cover onto the module.
4. Align the communication module with the inverter’s USB port.
5. Rotate the module clockwise to secure it.
What are the technical specifications for the GOODWE 4G KIT-G20?
| Device Management | |
| Max. Number of Connected Devices | 1 |
| Power | |
| Input Voltage (V) | 5 |
| Power Consumption (W) | <5 |
| Connection Interface | USB |
| Communication | |
| 4G/3G/2G | LTE-FDD: B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28/66 LTE-TDD: B34/38/39/40/41 WCDMA: B1/2/4/5/6/8/19 GSM/EDGE: B2/3/5/8 |
| GNSS | / |
| Bluetooth | Bluetooth V5.0 |
| Extension Antenna | 4G |
| Mechanical | |
| Dimensions (W×H×D mm) | 48.3*328*32.3 (With external antenna) |
| Weight (g) | 100 (With external antenna) |
| Indicator | LED*2 |
| Installation | Plug and Play |
| Sim card type | Micro SIM, 15mm*12mm |
| Environment | |
| Operating Temperature Range (°C) | -30~+65 |
| Storage Temperature Range (°C) | -40~+70 |
| Relative Humidity | 0-100% |
| Ingress Protection Rating | IP66 |
| Max. Operating Altitude (m) | 4000 |
How can I interpret the status of the indicator lights on the GOODWE 4G KIT-G20?
| Indicator | Status | Description |
|---|---|---|
| Power LED (Top) | Steady on | The Smart Dongle is powered on. |
| Off | The Smart Dongle is not powered on. | |
| Communication LED (Bottom) | Steady on | The Smart Dongle is connected to the server and communicating normally. |
| Single blink | The Bluetooth signal of the Smart Dongle is on. | |
| Two blinks | The Smart Dongle is not connected to the router. | |
| Four blinks | The Smart Dongle is connected to the router but not connected to the server. | |
| Six blinks | Communication between the Smart Dongle and the inverter is interrupted. | |
| Off | The software of the Smart Dongle is in reset or not powered on. |
How do I use the RELOAD button on the GOODWE 4G KIT-G20?
The RELOAD button on the GOODWE 4G KIT-G20 has the following functions:
• Double click: Turns on the Bluetooth signal.
• Press and hold for 0.5 to 3 seconds: Restarts the Smart Dongle.
• Press and hold for 6 to 20 seconds: Restores the Smart Dongle to factory settings.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD GOODWE 4G KIT-G20 (01) PDF DOCUMENT