Free English GOODWE 4G KIT-CN-G20 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GOODWE 4G KIT-CN-G20 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What safety precautions should be followed when installing the GOODWE 4G KIT-CN-G20?
All operations should be performed by trained and knowledgeable technicians who are familiar with local standards and safety regulations.
Strictly follow the installation, operation, and configuration instructions in this guide and the user manual. The manufacturer shall not be liable for equipment damage or personal injury if you do not follow the instructions.
How do I install the GOODWE 4G KIT-CN-G20?
The installation process involves the following steps:
Step 1. Remove the protective cover from the Smart Dongle.
Step 2. Insert a Micro SIM card (15mm x 12mm) into the designated slot.
Step 3. Securely replace the cover onto the Smart Dongle.
Step 4. Align and plug the Smart Dongle into the USB port of the inverter.
Step 5. Rotate the locking mechanism to secure the Smart Dongle in place.
What are the technical specifications for the GOODWE 4G KIT-CN-G20 and similar models?
| Model | 4G Kit-CN-G20 | 4G Kit-CN-G21 | 4G Kit-G20 |
|---|---|---|---|
| Device Management | |||
| Max. Number of Connected Devices | 1 | 1 | 1 |
| Power | |||
| Input Voltage (V) | 5 | 5 | 5 |
| Power Consumption (W) | <4 | <4 | <5 |
| Connection Interface | USB | USB | USB |
| Communication | |||
| 4G/3G/2G | LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B39/B40/B41 |
/ | LTE-FDD: B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28/66 LTE-TDD: B34/38/39/40/41 WCDMA: B1/2/4/5/6/8/19 GSM/EDGE: B2/3/5/8 |
| GNSS | / | BDS/GPS | / |
| Bluetooth | Bluetooth V5.0 | Bluetooth V5.0 | Bluetooth V5.0 |
| Extension Antenna | / | / | 4G |
| Mechanical | |||
| Dimensions (W×H×D mm) | 48.3*95.5*32.1 | / | 48.3*328*32.3 (With external antenna) |
| Weight (g) | 87 | / | 100 (With external antenna) |
| Indicator | LED*2 | / | LED*2 |
| Installation | Plug and Play | / | Plug and Play |
| Sim card type | Micro SIM, 15mm*12mm | / | Micro SIM, 15mm*12mm |
| Environment | |||
| Operating Temperature Range (°C) | -30~+65 | / | -30~+65 |
| Storage Temperature Range (°C) | -40~+70 | / | -40~+70 |
| Relative Humidity | 0-100% | / | 0-100% |
| Ingress Protection Rating | IP66 | / | IP66 |
| Max. Operating Altitude (m) | 4000 | / | 4000 |
What do the indicator light statuses mean on the GOODWE 4G KIT-CN-G20?
The indicator lights on the Smart Dongle show its operational status:
Power Indicator (Top Light):
Steady on: The Smart Dongle is powered on.
Off: The Smart Dongle is not powered on.
Communication Indicator (Bottom Light):
Steady on: The Smart Dongle is connected to the server and communicating normally.
Single blink: The bluetooth signal of the Smart Dongle is on. (Only for 4G Kit-G20)
Two blinks: The Smart Dongle is not connected to the router.
Four blinks: The Smart Dongle is connected to the router but not connected to the server.
Six blinks: Communication between the Smart Dongle and the inverter is interrupted.
Off: The software of the Smart Dongle is in reset or not powered on.
How do I use the RELOAD button on the GOODWE 4G KIT-CN-G20?
The RELOAD button has the following functions based on how it is pressed:
Double click: Turn on the bluetooth signal. (Only for 4G Kit-G20)
Press and hold for 0.5 to 3 seconds: Restart the Smart Dongle.
Press and hold for 6 to 20 seconds: Restore the Smart Dongle to factory settings.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD GOODWE 4G KIT-CN-G20 (01) PDF DOCUMENT