GOLDWOOD ACOUSTIC AUDIO AA5190 (01) PDF Document

Power Audio: 700W Total System Power

Drive Units: 2.25″ x 3 + 3″ x 2 + 5.25″ x 1

Frequency response: 20Hz-20KHz

Power supply: ~120V/60Hz

Dimensions:

Soundbar: W23.6″ x H2.8″ x D3.2″

Subwoofer: W7.7″ x H10″ x D7.8″

Satellite: W3.7″ x H4.6″ x D4.5″

The package for the GOLDWOOD ACOUSTIC AUDIO AA5190 contains the following items:

Soundbar – 1 pc

Subwoofer – 1 pc

Satellite – 2 pc

Remote control – 1 pc

User manual – 1 pc

Optical cable – 1 pc

3.5mm AUX cable – 1 pc

3.5mm RCA cable – 1 pc

Power adaptor – 1 pc

The features of the GOLDWOOD ACOUSTIC AUDIO AA5190 are:

• Soundbar with built-in amplifier

• Full audio spectrum performance, ideal for your favorite entertainment from Mp3, Mp4, CD/DVD movies and digital playbacks.

• Quality materials: Only the best components to recreate sound across all frequencies.

The speaker system is in standby mode when the power is on and the LED is on. Use the following buttons on the soundbar for operation:

1. /M button:

• Press to select the appropriate source. Keeping the key pressed for long will put it back in standby mode.

• You can toggle through the input modes by pressing the “/M “key:

“BT” Denotes Bluetooth Mode.

“HD” denotes ARC Mode.

“OPT” denotes Optical Mode.

“AU” denotes AUX Mode.

“USb” denotes USB card mode.

2. ►II button: Play/Pause the songs.

3. + button: Long press for volume increase / short press for next track.

4. – button: Long press for volume decrease / short press for previous track.

1. Power (৬): Power ON or Standby modes.

2. TONE: Allows you to choose “TREBLE” and “BASS”. Use “VOL+/-” to increase or decrease the volume of “TREBLE” or “BASS”.

3. EQ: Select from equalizer presets: NORMAL, CLASSIC, POP, ROCK, JAZZ.

4. VOL+: To increase the Volume by short or long press of VOL+.

5. |◄◄: Play the previous song. This function is not available in AUDIO mode.

6. ►II: Play/pause in USB/BT mode and MUTE in AUDIO mode.

7. ►►|: Play next song. This function is not available in AUDIO mode.

8. VOL-: To decrease the Volume by short or long press of VOL-.

9. BT: Bluetooth mode selection.

10. ARC: ARC mode selection.

11. OPT: OPTICAL mode selection.

12. AUX: AUX input mode selection.

13. USB: USB mode selection.

14. MUTE: Turn volume off. Depress again to activate the sound.

1. Press the “BT” button on the remote to convert to Bluetooth input mode. The LED display will start to flash fast to search for a Bluetooth device.

2. Turn on your mobile Bluetooth device and search for the device name “BT SPEAKER”.

3. Press pair on your Bluetooth device. When you have successfully paired your mobile to the speaker system, the LED will remain lit (long bright).

4. When starting to play your mobile music, the functions “PREVIOUS/NEXT”, “PLAY/PAUSE” can be operated via the front panel.

5. On BT mode, when connected with a mobile device, press “►II” for 3 seconds to force-disconnect the Bluetooth function.

1. DC IN: Connect the DC Power cord here.

2. AUX: Input to connect to sound sources such as a computer, CD player, MP3, etc.

3. OPT: Optical Input.

4. USB: USB Input. Note: Do NOT use the USB port for charging devices, as it is not designed for charging.

5. ARC: ARC Input.

6. AC IN: AC Power cord input (~120V/60Hz).

7. PAIR: Tap “PAIR” to enter the pairing mode, and tap again to confirm the pairing. Press and hold to power off and press again to power on.

8. LED:

• Red light stays on: The system is in standby mode.

• Blue light is on: The TWS connection is successful.

• Blue light slowly blinking: Pairing status.

9. Power ON/OFF: Switch for turning on/off the unit.

1. Sub-woofer: Place the sub-woofer any place on the floor.

2. Soundbar Speaker: Place it near the TV or DVD player.

For an ideal listening position, the listener should be centered in front of the soundbar, with the satellite speakers placed behind the listener on the left and right sides.

Please pay attention to the following items when using the speaker system:

• Place the unit on a stable, level surface.

• Keep the system away from water, moisture, and high heat sources like direct sunlight.

• Do not cover the unit or block ventilation openings.

• Do not use aerosol sprays near the speaker system.

• Do not attempt to open or service the unit yourself.

• Do not drop the unit.

• When unplugging from the wall, pull the plug itself, not the cord.

• Do not leave objects that generate magnetism near the speakers.

If the remote control does not function, it is because the battery of the remote control has been used up. Please replace the battery.