GEMBIRD LED-S-RGB500-01 (01) PDF Document

The main features of the GEMBIRD LED-S-RGB500-01 RGB LED Strip, 5 M include:

• Waterproof, self-adhesive, multi-color RGB LED light strip.
• Multi-color LEDs for red, green, or blue color, light effects, etc.
• Practical remote control with 44 buttons.
• Power adapter included.

The installation involves the following steps illustrated:

Step 1: Peeling the adhesive backing from the GEMBIRD LED-S-RGB500-01 RGB LED Strip and applying it to a surface.

Step 2: Cutting the GEMBIRD LED-S-RGB500-01 RGB LED Strip at the designated cut marks using scissors, as indicated by the close-up view of the connection points.

The electrical connection process for the GEMBIRD LED-S-RGB500-01 RGB LED Strip involves three steps:

Step 1: Connecting the LED strip cable to the Remote Controller box.

Step 2: Connecting the Remote Controller box to the DC plug cable (which comes from the power adapter).

Step 3: Plugging the power adapter’s DC plug into a wall socket to power the system on (“On”).

The remote control functions for the GEMBIRD LED-S-RGB500-01 RGB LED Strip are categorized as follows:

Brightness controls include buttons for increasing or decreasing brightness.

The power control includes an “on/off” button.

The control for stopping or starting the sequence is the “Pause/Run” button.

Color Select buttons allow choosing specific colors: R (Red), G (Green), B (Blue), and W (White).

Control the Colors and Change Speed buttons include:

• QUICK and SLOW buttons to control the speed of color changes.

DIY Function buttons allow for custom settings:

• DIY1, DIY2, DIY3, DIY4, DIY5, DIY6 allow for user-defined settings.
• AUTO button automatically changes colors and modes.
• FLASH button toggles Flash ON and OFF.

Color Change mode buttons include:

• JUMP3 button for Jump Change 3 Colors.
• JUMP7 button for Jump Change 7 Colors.
• FADE3 button for Gradual Change 3 Colors.
• FADE7 button for Gradual Change 7 Colors.

To access or replace the battery in the remote control for the GEMBIRD LED-S-RGB500-01 RGB LED Strip, you need to:

Press the release latch on the back of the remote control.

Slide the battery compartment cover out.

Replace the battery as indicated for the Battery compartment.

The instructions for waste disposal for the GEMBIRD LED-S-RGB500-01 RGB LED Strip are:

Do not deposit this equipment with the household waste. Improper disposal can harm both the environment and human health. For Information about waste collection facilities for used electrical and electronic devices, please contact your city council or an authorized company for the disposal of electrical and electronic equipment.

The manufacturer reserves the right to void any warranty claim for damages or defects due to:

• Misuse
• Abuse
• External impact (falling down, impact, ingress of water, dust, contamination or break).

Wearing parts (e.g. rechargeable batteries) are excluded from the warranty.