Free English FORD M-20201-S197 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD FORD M-20201-S197 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What items are included in the inventory for the FORD M-20201-S197?
Step 1: Inventory contents.
(1) M-20201-S197 Strut Tower Brace
(1) Instruction Sheet
What are the installation instructions for the FORD M-20201-S197?
Step 1: Inventory contents.
Step 2: Remove existing strut tower nuts (4 places, 2 per side).
Step 3: Install strut tower brace over existing studs.
Step 4: Install strut tower nuts.
Step 5: Torque strut tower nuts (4 places, 2 per side) to 25 lb*ft +/- 3.
Step 6: Check clearance.
What is the torque specification for the strut tower nuts on the FORD M-20201-S197?
Torque strut tower nuts (4 places, 2 per side) to 25 lb*ft +/- 3.
CLICK HERE TO DOWNLOAD FORD M-20201-S197 (01) PDF DOCUMENT