FIFINE AMPLIGAME AM8 (01) PDF MANUAL

The FIFINE AMPLIGAME AM8 package includes the following items:

1X Dynamic Microphone with Windscreen

1X 6.5ft (2m) USB Cable

1X Mic Based Stand

1X User’s Manual

The parts of the FIFINE AMPLIGAME AM8 microphone are identified as follows:

A. Dynamic Microphone Capsule

B. Flocking Windscreen

C. Mute Button / LED Indicator

D. RGB Button

E. Microphone Gain

F. Headphones Volume Control

G. RGB Lighting

H. Headphone Jack

I. Type-C Port

J. XLR Port

K. Mic Based Stand

L. USB Cable

1. Screw the base stand (included) or an arm stand (not included) into the connected AM8 until they are firmly connected.

2. The FIFINE AMPLIGAME AM8 is an end-addressing dynamic microphone. For optimal sound quality, always keep the top of the mic facing the audio source.

Connect the FIFINE AMPLIGAME AM8 microphone to your computer or PS4/PS5 using the included USB-C cable.

Connect the microphone to a mixer or audio interface using an XLR cable (not included). The microphone does not require phantom power.

Tip: All button keys (Mute, RGB) and the headphones monitoring feature on the mic are only available when using the USB-C port connection. These functions are invalid when using the XLR port connection.

Mute Button:

Tap the mute button to mute or unmute the microphone. The LED indicator will show the status:

• Red LED: Microphone is muted.

• Green LED: Microphone is active.

RGB Button:

Long press the RGB button for 3 seconds to turn the RGB lighting on or off. Tap the button to cycle through different RGB modes or select a solid color.

Input Settings

1. Right-click the speaker icon on the taskbar and select “Open Sound settings”.

2. In the Sound settings window, under the “Input” section, choose “Fifine Microphone” as your input device.

3. The microphone input volume is pre-set and cannot be adjusted through the computer’s settings.

Output Settings

You can choose where the audio from your computer plays.

• Output audio from computer’s built-in speakers: In the Sound settings, under the “Output” section, choose your computer’s default speakers (e.g., “Realtek High Definition Audio”) as the output device.

• Output audio from headphones connected to the mic: Plug your headphones into the 3.5mm jack on the FIFINE AMPLIGAME AM8. In the Sound settings, choose “Headphones (Fifine Microphone)” as your output device.

• Monitor your voice from the mic: To hear your own voice in real-time through headphones connected to the mic, select “Fifine Microphone” as the output device. Before doing this, go to Speaker Properties > “Level” and ensure the speaker icon under “microphone” is turned on.

Important Tips for Windows:

1. Please plug your headphones into the microphone jack before you start monitoring.

2. If you want to output computer audio via the computer’s built-in headphone jack, you need to select the computer’s main sound device (e.g., “Realtek High Definition Audio”) as the default playback device.

3. When using recording software, make sure to select “Fifine Microphone” as the input device within that software’s settings.

The following instructions apply only to the USB connection.

Input Settings

1. Open System Preferences.

2. Click on “Sound”.

3. Select the “Input” tab.

4. Choose “Fifine Microphone” from the list of sound input devices.

Output Settings

1. Open System Preferences and go to “Sound”.

2. Select the “Output” tab.

3. Choose your desired audio output device:

• To output audio from the Mac’s internal speakers, select “Internal Speakers”.

• To output audio from headphones connected to the FIFINE AMPLIGAME AM8 and monitor your voice, select “Fifine Microphone”.