Free English HISENSE PARTY THUNDER (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HISENSE PARTY THUNDER (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I connect a Bluetooth device to my HISENSE PARTY THUNDER?
To connect via Bluetooth, ensure the Bluetooth function is enabled on your HISENSE PARTY THUNDER and select it from the devices list on your phone or audio player. Once paired, the status will show as connected.
What are the controls for music playback on the HISENSE PARTY THUNDER?
The control panel on the HISENSE PARTY THUNDER allows for the following playback operations:
Press the button with the right arrow icon once to skip to the next track.
Press the button with the left arrow icon once to return to the previous track.
Press the play/pause button once to start or pause playback.
Use the volume plus (+) and minus (-) buttons to adjust the sound level.
How do I connect a microphone or guitar to the HISENSE PARTY THUNDER?
To use external audio input devices with your HISENSE PARTY THUNDER, connect the microphone cable into the dedicated microphone jack or the guitar cable into the guitar input jack. Use the corresponding rotary knobs located on the top panel to adjust the input volume for the microphone or guitar independently.
How can I charge external devices using my HISENSE PARTY THUNDER?
You can use the USB port on your HISENSE PARTY THUNDER to charge compatible external devices. Connect your device’s charging cable to the USB port on the unit to initiate charging.
How do I connect an external audio source via AUX on the HISENSE PARTY THUNDER?
To connect an external audio source, insert a 3.5mm audio cable into the AUX IN port on the HISENSE PARTY THUNDER and connect the other end to your audio player.
How do I use the TWS function with two HISENSE PARTY THUNDER units?
To pair two HISENSE PARTY THUNDER speakers for True Wireless Stereo (TWS) mode, follow these steps:
1. Power on both speakers.
2. Activate the pairing function on both units.
3. Once connected, one unit will act as the Master and the other as the Slave to provide stereo sound.
What does the Auracast feature do on the HISENSE PARTY THUNDER?
The Auracast feature on the HISENSE PARTY THUNDER allows the speaker to participate in broadcast audio environments. You can activate this mode through the control panel by selecting the Auracast button to begin the connection process.
CLICK HERE TO DOWNLOAD HISENSE PARTY THUNDER (01) PDF DOCUMENT