Free English ESATTO ETM413W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ESATTO ETM413W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the installation requirements for the ESATTO ETM413W?
Two person installation: Use two or more people to move and install the appliance. Failure to do so can result in back or other injury.
Freestanding design: This appliance is designed to be freestanding only, and should not be recessed or built-in.
Floor surface: This appliance must be properly positioned on a dry, sturdy, level surface that is strong enough to support it when it is fully loaded.
Ambient temperature: The ambient temperatures must correspond to the climate class (T) indicated on the rating plate of the appliance: 16°C – 38°C.
What are the ventilation clearance guidelines for the ESATTO ETM413W?
Ensure that air can circulate freely around the back of the cabinet, which is necessary to cool the compressor and condenser.
Allow at least 10cm clear space at the back, 10cm at the sides of the unit and 30cm between the top and any surface above.
If you are installing your refrigerator next to a fixed wall, leave sufficient space on the hinge side to allow for the door to swing open.
How do I prepare the ESATTO ETM413W for first use?
When starting up for the first time, keep the refrigerator still for 2 hours before connecting it to power supply.
Before putting any fresh or frozen foods in the fridge, ensure the fridge has run for 2–3 hours, or for at least 4 hours in summer when the ambient temperature is high.
How do I adjust the temperature controls on the ESATTO ETM413W?
The temperature controls are located on the inside of the fridge.
To change the internal temperature of the fridge, push the Setting button to cycle through the various four temperature settings to the level you wish to use.
What are the physical dimensions of the ESATTO ETM413W?
The size dimensions (mm) are 700W x 670D x 1723H.
CLICK HERE TO DOWNLOAD ESATTO ETM413W (01) PDF DOCUMENT