Free English ESATTO ETM314W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ESATTO ETM314W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How many people are required to install the ESATTO ETM314W?
Use two or more people to move and install the appliance. Failure to do so can result in back or other injury.
Can the ESATTO ETM314W be recessed or built-in?
No, this appliance is designed to be freestanding only, and should not be recessed or built-in.
What type of floor surface is required for the ESATTO ETM314W?
This appliance must be properly positioned on a dry, sturdy, level surface that is strong enough to support it when it is fully loaded.
What is the recommended ambient temperature range for the ESATTO ETM314W?
The ambient temperatures must correspond to the climate class (T) indicated on the rating plate of the appliance: 16°C – 38°C.
What are the clearance requirements for ventilation around the ESATTO ETM314W?
Ensure that air can circulate freely around the back of the cabinet, which is necessary to cool the compressor and condenser. Allow at least 10cm clear space at the back, 10cm at the sides of the unit and 30cm between the top and any surface above. If you are installing your refrigerator next to a fixed wall, leave sufficient space on the hinge side to allow for the door to swing open.
What should I do before connecting the ESATTO ETM314W to the power supply for the first time?
When starting up for the first time, keep the refrigerator still for 2 hours before connecting it to the power supply.
How long should the ESATTO ETM314W run before I can add food?
Before putting any fresh or frozen foods in the fridge, ensure the fridge has run for 2–3 hours, or for at least 4 hours in summer when the ambient temperature is high.
How do I adjust the temperature settings on the ESATTO ETM314W?
The temperature controls are located on the inside of the fridge. To change the internal temperature of the fridge, push the Setting button to cycle through the various four temperature settings to the level you wish to use.
CLICK HERE TO DOWNLOAD ESATTO ETM314W (01) PDF DOCUMENT