Free English EPSON ET-2760 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD EPSON ET-2760 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the functions of the control panel buttons and lights on the EPSON ET-2760?
The control panel on the EPSON ET-2760 features the following buttons and lights:
- Power button and light: Turns the product on or off.
- Home button: Returns to the home screen.
- LCD screen: Displays menus and status information.
- Help button: Displays help information.
- Stop button: Stops the current operation.
- Back button: Returns to the previous screen.
- Arrow buttons and OK button: Use the arrow buttons to scroll through menus and the OK button to select options.
- Reset button: Resets settings or changes character case/type when entering text.
- Start button: Starts a selected operation (like copying or scanning).
What do the status icons on the EPSON ET-2760 LCD screen indicate?
The product displays status icons on the LCD screen for certain conditions:
| Icon | Description |
|---|---|
| Wi-Fi symbol with a slash | No Wi-Fi connection. |
| Wi-Fi symbol with exclamation point | A Wi-Fi network error has occurred or the product is searching for a connection. |
| Wi-Fi symbol with bars | A Wi-Fi connection is established. The number of bars indicates the connection’s signal strength. |
| AP symbol with a slash | No Wi-Fi Direct connection. |
| AP symbol | A Wi-Fi Direct connection is established. |
How do I enter characters on the EPSON ET-2760 LCD screen?
Follow these guidelines to enter characters for passwords and other settings:
- To scroll through the characters, press the up or down arrow button.
- To change the character case or type, press the reset button.
- To move the cursor to the right, press the right arrow button.
- To delete the previous character, press the left arrow button.
How do I change the LCD screen language on the EPSON ET-2760?
- Press the home button, if necessary.
- Press the arrow buttons to select Settings and press the OK button.
- Select Printer Setup and press the OK button.
- Select Language and press the OK button.
- Select a language and press the OK button.
- Press the home button to exit.
How do I change the Sleep Timer setting on the EPSON ET-2760?
You can use the control panel to change the time period before the product enters sleep mode:
- Press the home button, if necessary.
- Press the arrow buttons to select Settings and press the OK button.
- Select Printer Setup and press the OK button.
- Select Sleep Timer and press the OK button.
- Press the left or right arrow button to move the cursor and press the up or down arrow button to adjust the number of minutes of inactivity before the product enters sleep mode. Then press the OK button.
- Press the home button to exit.
How do I change the Power Off Timer setting on the EPSON ET-2760?
You can use the control panel to change the time period before the printer turns off automatically:
- Press the home button, if necessary.
- Press the arrow buttons to select Settings and press the OK button.
- Select Printer Setup and press the OK button.
- Select Power Off Timer and press the OK button.
- Select the length of time after which you want the product to automatically turn off when it is not in use. Then press the OK button.
- Press the home button to exit.
How do I set up Epson Connect Services on the EPSON ET-2760?
If you did not activate your product’s email address for use with Epson Connect when you set up your product, you can activate it using the product control panel:
- Press the home button, if necessary.
- Press the left or right arrow button to select Settings and press the OK button.
- Press the arrow buttons to select Epson Connect Services and press the OK button.
- Press the OK button to select Register/Delete.
- Press the arrow buttons to select Yes and press the OK button.
- Follow the instructions on your screen to activate your product’s email address.
How do I select wireless network settings from the control panel on the EPSON ET-2760?
- Press the home button, if necessary.
- Press the arrow buttons to select Wi-Fi Setup and press the OK button.
- Press the arrow buttons to select Wi-Fi (Recommended) and press the OK button twice.
- Press the arrow buttons to select Wi-Fi Setup Wizard and press the OK button twice.
- Press the arrow buttons to select the name of your wireless network and press the OK button. If you do not see your wireless network’s name, you can enter it manually by selecting Other SSIDs.
- Enter your wireless password (or network name and then password).
- To scroll through the characters, press the up or down arrow button.
- To move the cursor to the right, press the right arrow button.
- To change the character case or type, press the reset button.
- To delete the previous character, press the left arrow button.
- When you finish entering characters, press the OK button.
- If you want to print a network setup report, press the start button. (Otherwise, press the stop button.)
- Press the OK button to exit, if necessary.
How do I enable Wi-Fi Direct Mode on the EPSON ET-2760?
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point.
- Press the home button, if necessary.
- Press the arrow buttons to select Wi-Fi Setup and press the OK button.
- Press the arrow buttons to select Wi-Fi Direct and press the OK button.
- Press the OK button until you see the network name and password on the LCD screen.
- Press the down arrow button and press the OK button to change the Wi-Fi Direct password.
- Enter your Wi-Fi Direct password. (Password must be at least 8 and no more than 22 characters long.)
- Press the OK button.
- Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
- Press the OK button to exit.
How do I connect the EPSON ET-2760 to a network using WPS?
If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product.
- Press the WPS button on your router.
- On the product, press the home button, if necessary.
- Press the arrow buttons to select Settings > Network Settings > Wi-Fi Setup.
- Press the arrow buttons to select Push Button (WPS) and press the OK button.
- Follow the instructions on the LCD screen to complete WPS setup.
How do I print a Network Status Sheet on the EPSON ET-2760?
- Press the home button, if necessary.
- Press the arrow buttons to select Settings and press the OK button.
- Press the arrow buttons to select Network Settings and press the OK button.
- Press the arrow buttons to select Print Status Sheet and press the OK button.
- Press the start button to print the network status sheet.
What do the error codes on the EPSON ET-2760 network connection report mean?
| Error code | Message | Solution |
|---|---|---|
| E1 | Confirm that the network cable is connected and network devices such as hub, router, or access point are turned on. | Make sure your router, access point, and/or hub are turned on, and the network cable is securely connected to your device and to your product. If you are trying to set up Wi-Fi, remove the network cable and set up Wi-Fi again. Ethernet and Wi-Fi cannot be connected at the same time. |
| E2, E3, or E7 | No wireless network names (SSID) found. Confirm that the router/access point is turned on and the wireless network (SSID) is set up correctly. | Make sure your router or access point is turned on and correctly connected. Turn off the router, wait 10 seconds, and turn it on again. Move your product closer to the router. Confirm the SSID on the report matches the router label and uses only ASCII characters. |
| E5 | Security mode (e.g. WEP, WPA) does not match the current setting of the printer. | Check the security settings on your router (WEP-64, WEP-128, WPA PSK (TKIP/AES), WPA2 PSK (TKIP/AES)). Make sure you are connecting to the 2.4GHz band. |
| E6 | MAC address of your printer may be filtered. | If MAC address filtering is enabled, register your product’s MAC address so it is not filtered. If using shared authentication with WEP, confirm the correct authentication key and index. |
| E8 | Incorrect IP address is assigned to the printer. | If Obtain IP Address is set to Auto, enable DHCP on your router. If set to Manual, the IP address may be out of range; set a valid IP address. |
| E9 | Confirm the connection and network setup of the PC or other device. | Make sure your computer or network device are turned on and can access the network. Turn off router, wait 10 seconds, turn on again. Download and install product software again. |
| E10 | Confirm IP address, subnet mask, and default gateway setup. | If Obtain IP Address is Manual, check IP address, subnet mask, and default gateway addresses. If DHCP is enabled, set Obtain IP Address to Auto. |
| E11 | Setup is incomplete. Confirm default gateway setup. | If TCP/IP Setup is Manual, check that the default gateway address is correct. Turn on the device set as the default gateway. |
| E12 | Confirm entered security key/password is correct, Index is set to first number, IP address/subnet mask/default gateway is correct. | Make sure IP address, subnet mask, and default gateway are correct if manual. Confirm subnet mask and default gateway match other devices. Check for IP conflicts. Turn router off/on. |
| E13 | Confirm entered security key/password is correct, Index is set to first number, Connection and network setup of PC is correct. | Make sure router/hub are turned on. Make sure TCP/IP setup on router/hub is not manual. Turn router off/on. Download/install product software again. |
How do I load paper in the sheet feeder of the EPSON ET-2760?
- Flip the feeder guard forward, then raise the paper support.
- Pull out the output tray.
- Slide the edge guides out all the way.
- If inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. (Do not fan or curl photo paper.)
- Insert paper, glossy or printable side up and short edge first, at the center of the paper support.
- For envelopes: Load up to 10 envelopes, printable side up and flap edge left.
- For loose-leaf paper: Load with holes facing the left.
- For paper longer than legal size: Close the paper support and output tray, then flatten the leading edge of the paper.
- Slide the edge guide against the paper, but not too tightly. Then flip the feeder guard back.
- If prompted by the product’s LCD screen, select the size and type of the paper you loaded and press the OK button.
What is the paper loading capacity for the EPSON ET-2760?
| Paper type | Loading capacity |
|---|---|
| Plain paper, Copier paper, Letterhead | Letter or A4 size or smaller: Up to the line indicated by the arrow mark. Legal or 8.5 x 13 inches size: 1 sheet. |
| Epson Bright White Pro Paper, Epson Bright White Premium Paper, Epson Multipurpose Plus Paper | Up to the line indicated by the arrow mark. |
| Epson Presentation Paper Matte | 80 sheets. |
| Epson Premium Presentation Paper Matte, Epson Photo Paper Glossy, Epson Premium Photo Paper Glossy, Epson Ultra Premium Photo Paper Glossy, Epson Premium Photo Paper Semi-gloss | 20 sheets. (If paper feeds incorrectly, load 1 sheet at a time.) |
| Epson Premium Presentation Paper Matte Double-sided, Epson Ultra Premium Presentation Paper Matte | 1 sheet. |
| Envelopes | 10 envelopes. |
How do I change the paper size and type settings on the control panel of the EPSON ET-2760?
You can change the default paper size and paper type using the control panel on the product.
- Press the home button, if necessary.
- Select Settings > Printer Setup > Paper Source Settings > Paper Setting.
- Select Paper Size and choose the paper size you loaded.
- Select Paper Type and choose the paper type you loaded.
- Select the home button to exit.
Note: These settings appear automatically when paper is inserted if you set the Paper Setup Auto Display setting to On.
How do I place originals on the scanner glass of the EPSON ET-2760?
- Open the document cover.
- Place your original facedown on the scanner glass with the top facing into the corner. Slide the original to the edges of the indicated corner.
- Close the document cover gently to keep your original in place.
Note: The edges of your original may be cropped by 0.06 inch (1.5 mm) from the edge of the scanner glass. Manually position your original away from the edges to prevent cropping.
How do I copy documents or photos on the EPSON ET-2760?
- Place your original document or photo on the scanner glass.
- Load the paper you want to print on in the product.
- Press the home button, if necessary.
- Press the left or right arrow button to select Copy and press the OK button.
- To print more than one copy, press the up or down arrow button to select the number (up to 99).
- Press the left or right arrow button to select either Color (for color copies) or B&W (for black-and-white copies).
- Press the OK button to view the print settings for the copies.
- Press the down arrow button to view individual settings. To change settings, press the left or right arrow button and select the necessary settings. When finished, press the OK button.
- When you are ready to copy, press the start button.
What copying options are available on the EPSON ET-2760?
| Copying option | Description |
|---|---|
| 2-Sided | Select 1>1-Sided or 1>2-Sided. When selecting 1>2-Sided, also select the orientation and binding edge. |
| Density | Adjusts the lightness or darkness of copies. |
| Paper Size | Selects the paper size. |
| Paper Type | Selects the paper type. |
| Reduce/Enlarge | Options include Actual Size, Auto Fit, Custom 100% and other conversions (Custom Size can be adjusted from 25-400%). |
| Original Size | Select the document size of your original. |
| Multi-Page | Single Page copies each page to an individual sheet. 2-up copies multiple pages onto one sheet. |
| Quality | Adjusts quality: Draft, Standard, Best. |
| ID Card Copy | Select On to copy both sides of an ID card onto one side of a sheet of paper. |
| Borderless | Select On, Standard, Medium, or Minimum to adjust expansion for borderless photos. |
How do I start a scan using the control panel on the EPSON ET-2760?
- Make sure you installed the product software and connected the product to your computer or network.
- Press the home button, if necessary.
- Press the left or right arrow button to select Scan and press the OK button.
- Press the left or right arrow button to select a scan option and press the OK button:
- To Memory: Saves file on a memory card.
- To Computer (JPEG): Saves as JPEG on your computer.
- To Computer (PDF): Saves as PDF on your computer.
- To Computer (Email): Scans and attaches to an email message.
- To Computer (WSD): Manages network scanning in Windows.
- If scanning to a network computer, select the target computer. If connected via USB, select USB Connection. If scanning to a memory card, review/change settings.
- Press the start button to start scanning.
What are the available Scan to Memory Card options on the EPSON ET-2760?
| Setting | Description |
|---|---|
| Format | JPG (for photos), PDF (for documents). |
| Color | Color, B&W. |
| Scan Size | A4, Letter, Auto Cropping (for photos with dark edges), Max Area (for most photos). |
| Original Type | Text, Photograph. |
| Resolution | 200 dpi (email/web), 300 dpi (print/OCR), 600 dpi (highest quality). |
| Contrast | Decrease or increase image contrast. |
| Original Orientation | Portrait, Landscape. |
How do I check ink levels on the EPSON ET-2760?
To confirm the actual ink levels, visually check the ink levels in the product’s ink tanks. Make sure the ink levels are above the lower lines on the ink tanks.
Note: The product has a low ink alert system that estimates the ink remaining. It relies on the user refilling the tanks correctly. As a precaution, perform regular visual inspections. Continued use when the ink level is below the lower line could damage the product.
How do I refill the ink tanks on the EPSON ET-2760?
- Turn on your product.
- Lift up the scanner unit.
- Open the ink tank cover, then open the cap for the ink tank you are going to fill.
- Hold the ink bottle upright and slowly turn the bottle cap to remove it. (Do not shake or squeeze the bottle.)
- Position the top of the ink bottle along the slot in front of the filling port, then slowly stand the bottle up to insert it.
- Wait for the ink to fill the tank. Ink flows into the tank and stops automatically when full. (Do not squeeze the bottle.)
- When the ink tank is full, remove the ink bottle and securely close the ink tank cap.
- Repeat for each tank you need to refill.
- Close the ink tank cover, then close the scanner unit.
- Press the home button, select Maintenance > Reset Ink Levels, and follow the on-screen instructions to reset the ink level for the colors you refilled.
How do I perform a print head nozzle check on the EPSON ET-2760 using the control panel?
- Make sure there are no errors on the LCD screen and the output tray is extended.
- Load a few sheets of plain paper.
- Press the home button, if necessary.
- Select Maintenance and press the OK button.
- Press the OK button to select Nozzle Check.
- Press the start button to print the nozzle check pattern.
- Check the printed pattern:
- If there are no gaps, select No and press the OK button.
- If there are gaps or the pattern is faint, select Yes and press the OK button. Follow instructions to clean the print head.
How do I clean the print head using the control panel on the EPSON ET-2760?
- Make sure there are no errors on the LCD screen and the output tray is extended.
- Load a few sheets of plain paper.
- Press the home button, if necessary.
- Select Maintenance and press the OK button.
- Select Head Cleaning and press the OK button.
- Press the start button to clean the print head.
- When finished, select Nozzle Check, press OK, and press start to run a nozzle check and confirm the print head is clean.
How do I align the print head on the EPSON ET-2760 using the control panel?
- Make sure there are no errors on the LCD screen and the output tray is extended.
- Load a few sheets of plain paper.
- Press the home button, if necessary.
- Select Maintenance and press the OK button.
- Select Print Head Alignment and press the OK button.
- Select Vertical Alignment or Horizontal Alignment and press the OK button.
- Press the OK button to print an alignment sheet.
- Check the printed pattern and select the number representing the most solid printed pattern for each set on the LCD screen.
- Press the OK button when you are finished.
How do I run a Power Cleaning on the EPSON ET-2760 using the control panel?
Note: Power Cleaning consumes a lot of ink. Run it only if necessary and if each ink tank is at least one-third full.
- Turn off the product.
- Press and hold the power button and the help button (?) at the same time until you see the Power Cleaning screen.
- Follow the instructions on the LCD screen to run the Power Cleaning.
- When finished, run a nozzle check.
If print quality does not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.
How do I clean the paper guide on the EPSON ET-2760?
If you see ink on the back of a printout, clean the paper guide rollers:
- Load plain paper (Letter or A4 size).
- Select Maintenance.
- Select Paper Guide Cleaning and press the OK button.
- Follow the on-screen instructions.
- Repeat as necessary until the paper comes out clean.
How do I remove paper jammed inside the EPSON ET-2760?
- Cancel the print job, if necessary.
- Remove any jammed paper from the rear paper feed.
- Lift the scanner unit and remove any jammed paper inside. Caution: Do not touch the flat white cable or translucent film inside the printer.
- Close the scanner unit.
- Follow the prompts on the LCD screen to clear any error messages.
How do I remove paper jammed in the rear cover of the EPSON ET-2760?
- Cancel the print job, if necessary.
- Pull any jammed paper out of the rear paper feed.
- Press the buttons to release the rear cover and remove the cover from your product.
- Carefully remove any jammed paper from inside the product.
- Press in the buttons and reattach the rear cover.
- Follow the prompts on the LCD screen to clear any error messages.
What are the paper specifications for the EPSON ET-2760?
Single-sheets size: A4, A6, Letter, Legal, 8.5 x 13 inches, 4 x 6 inches, 5 x 7 inches, 8 x 10 inches, 3.5 x 5 inches, Executive, 16:9 wide, Half Letter.
Paper types: Plain paper. (Compatible Epson papers are also supported.)
Weight (Plain paper): 17 lb (64 g/m²) to 24 lb (90 g/m²).
Envelopes size: No. 10.
Envelopes weight: 20 lb (75 g/m²) to 24 lb (90 g/m²).
NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER
CLICK HERE TO DOWNLOAD EPSON ET-2760 (01) PDF DOCUMENT
Is there a way to put a lock on it