Free English ELECTROLUX LFG716W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ELECTROLUX LFG716W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the functions of the control panel on the ELECTROLUX LFG716W cooker hood?
| Function | Description |
| Hob²Hood | Indicator of the function to control hood from hob. |
| Lamp | Turns the lights on and off. |
| First speed / Off | The motor switches to first speed level. Second press turns off the appliance. |
| Second speed | The motor switches to second speed level. |
| Third speed | The motor switches to third speed level. |
| Maximum speed | The motor switches to maximum speed level. |
| Filter notification | Reminds to change or clean the charcoal filter and clean the grease filter. |
What are the recommended speed settings for using the ELECTROLUX LFG716W cooker hood?
Please check the recommended speed for your ELECTROLUX LFG716W according to the table below.
Speed Setting 1 |
While heating up food, cooking with covered pots. |
Speed Setting 2 |
While cooking with covered pots on multiple cooking zones or burners, gentle frying. |
Speed Setting 3 |
While boiling, frying large quantities of food without a lid, cooking on multiple cooking zones or burners. |
Maximum Speed |
While boiling, frying large quantities of food without a lid, with high humidity. The hood operates on maximum speed. After 6 minutes the appliance returns to the previous setting. |
How do I operate the ELECTROLUX LFG716W cooker hood?
It is recommended to leave the hood operating for approximately 15 minutes after cooking.
To operate the hood:
1. Press the first speed button to switch on the appliance.
2. If needed, press the light button to illuminate the cooking surface.
3. If needed, change the speed by pressing the desired button.
To turn off the appliance, press the first speed button again.
What is the Hob²Hood function on the ELECTROLUX LFG716W?
The Hob²Hood is an automatic function that connects the hob with the hood. Both the hob and the hood on your ELECTROLUX LFG716W have an infrared signal communicator. The speed of the fan is defined automatically based on the mode setting and the temperature of the hottest cookware on the hob. You can also operate the fan using the hob manually. The function can be activated from the panel of the hob.
How does the filter notification on the ELECTROLUX LFG716W work?
The filter alarm reminds you to change or clean the charcoal filter and the grease filter.
• The filter indicator is turned on for 30 seconds if the grease filter must be cleaned.
• The filter indicator flashes for 30 seconds if the charcoal filter must be replaced or cleaned.
To reset the function, press the filter notification button for 3 seconds.
To activate or deactivate the function:
1. To activate the function, press the filter notification button for 3 seconds. If the function is activated, the indicator flashes two times.
2. To deactivate the function, press the filter notification button for 3 seconds. If the function is deactivated, the indicator flashes once.
How can I connect or disconnect the remote control for my ELECTROLUX LFG716W?
The connection for the remote control on your ELECTROLUX LFG716W is originally enabled. To connect or disconnect the remote-control:
1. Switch off the appliance.
2. Press the maximum speed button for 3 seconds.
The indicator on the control panel flashes twice if the function is enabled and once if it is disabled.
What are the general cleaning instructions for the ELECTROLUX LFG716W?
| Cleaning Agents |
Do not use abrasive detergents and brushes. Clean the surface of the appliance with a soft cloth with warm water and a mild detergent. After cooking some parts of the appliance can get hot. To avoid stains, the appliance must be cooled down and dried with a clean cloth or paper towels. Clean stains with a mild detergent. |
| Keep the hood clean |
Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or other residue may cause fire. Follow the instructions for cleaning the accessories when the filter notification is on. Grease filters can be washed in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, but this has no influence on the performance of the appliance. |
| Charcoal filter | The saturation time of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated, and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage. |
How do I clean the grease filter on my ELECTROLUX LFG716W?
Filters are mounted with the use of clips and pins on the opposite side.
To clean the filter:
1. Press the handle of the mounting clip on the filter panel underneath the hood.
2. Slightly tilt the front of the filter downwards, then pull.
Repeat the first two steps for all filters.
3. Clean the filters using a sponge with non-abrasive detergents or in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, but this has no influence on the performance of the appliance.
4. To mount the filters back, follow the first two steps in reverse order. Repeat the steps for all filters if applicable.
How do I replace the charcoal filter on my ELECTROLUX LFG716W?
WARNING! The charcoal filter is non-washable!
To replace the filter:
1. Remove the grease filters from the appliance.
2. Press the front edge in the slot towards the bottom part of the filter. Slightly tilt the front of the filter downwards.
3. To install a new filter, perform the same steps in reverse order.
In any case, it is necessary to replace the filters at least every four months.
How do I replace the lamp on my ELECTROLUX LFG716W?
Your ELECTROLUX LFG716W is supplied with a LED lamp and separate control gear (LED driver). These parts can be replaced by a technician only. In case of any malfunction, refer to the “Service” section in the “Safety Instructions” chapter.
What should I do if my ELECTROLUX LFG716W is not working correctly?
| Problem | Possible cause | Remedy |
| You cannot activate the appliance. | The appliance is not connected to a power supply or it is connected incorrectly. | Check if the appliance is correctly connected to the electrical supply. |
| You cannot activate the appliance. | The fuse is blown. | Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. |
| The lamp does not operate. | The lamp is defective. | Replace the lamp. Refer to the “Care and Cleaning” chapter. |
| The appliance does not absorb enough vapours. | The motor speed is not adequate to the appearing vapours. | Change the speed of the motor. |
| The filter alarm indicator is on. | The filter alarm is on. The grease filter must be cleaned or the charcoal filter must be replaced or cleaned. | Refer to the filter notification in the “Daily use” chapter. |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ELECTROLUX LFG716W (01) PDF DOCUMENT