Click here to download ELECTRIQ EIQFFSTD7 (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** electrie.i USER MANUAL 7KG TUMBLE DRYER eiQFFSTD7 Thank you for choosing electriQ Please read this user manual before using this Tumble Dryer and keep it safe for future reference. Visit our page for our entire product range


****** Page 3 ****** SAFETY WARNINGS For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. Read all instructions carefully before using the appliance and keep them for future reference. Retain the manual. If you pass the unit onto a third party, make sure to include the manual. This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. • Children of less than 3 years should be kept away unless continuously supervised. The unit must be maneuvered by a minimum of 2 people. • Do not use if the power cord is damaged. • Never touch the power cord/plug with wet hands. This may cause a short circuit or electric shock. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. Do not use extension cords or ungrounded adapters. • The tumble dryer is not to be used if industrial chemicals have been used for cleaning. When positioning the appliance, ensure the supply cord is not trapped or damaged. Use a dedicated power socket. The power socket shall not be shared with other electrical appliances. • Ensure the socket is suitably earthed. If in any doubt a suitable socket must be installed by a qualified electrician. • When unplugging the appliance firmly grasp the plug and pull out 3

****** Page 4 ****** from the socket. Do not pull the power cord. This appliance is intended to be used in household and similar applications and is not designed for use within a commercial environment. The lint trap has to be cleaned frequently. Lint must not to be allowed to accumulate around the tumble dryer. • Do not dry unwashed items in the tumble dryer. • Items that have been soiled with substance such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with extra detergent before being dried in the tumble dryer. • Items such as foam rubber (latex form), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. • Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. Diagrams within the manual are for illustrative purposes only, due to continual product improvement the product may vary from the illustrations. The exhaust air must not be discharged into a flue which is used for exhausting fumes from appliance burning gas or other fuels. The appliance must not be install behind a lockable door, a sliding door or a door with a hinge on the opposite side, to that of the tumble dryer. In such a way that a full opening of the tumble dryer door is restricted. • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire 4

****** Page 5 ****** hazard. The appliance should not be overturned during normal use or maintenance. Remove all objects from pockets such as lighters and matches. For appliances with ventilation openings in the base, that a carpet must not obstruct the openings. The plug must be accessible after installation. Warning: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. Remove all packaging before using the appliance. Otherwise serious damage may result. PRECAUTIONS Install or store where it will not be exposed Keep area around the exhaust opening and to temperatures below freezing or exposed adjacent surrounding areas free from the to water or weather, which could cause permanent damage and invalidate the warranty. Thoroughly spin the laundry in washing machine. High spin speed can reduce the drying time and save energy consumption. accumulation of lint, dust and dirt. An obstructed port might reduce the airflow. Make sure combustible sprayer will not be close to dryer when it is working, and once the gas leaks, do not touch plug or start/pause on it. 5

****** Page 6 ****** Do not wash or dry articles that have been cleaned in, washed in, soaked in or spotted with combustible or explosive substances ( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). Do not allow children on or in the appliance. Close supervision of children is necessary when the appliance is used near children. Do not store plastic, paper or clothing that may burn or melt on top of the dryer during operation. Do not dry articles containing rubber, plastic or similar materials such as padded bras, tennis shoes, bath mats, rugs, bibs, nappies, raincoats, plastic bags or pillows that may melt or burn. Some rubber materials, when heated, can under certain circumstances produce fire by spontaneous combustion. Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,or has missing or broken parts, including a damaged cord or plug. Please do not use the machine when your feet or hands are wet. The exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. The door can be opened only after the drying programme has completed Do not open the door before the programme has finished to avoid being scalded by hot steam or over heating the dryer. 6

****** Page 7 ****** KEY COMPONENTS Top Control panel O OCC OCO 00 0 Door Filter Front anel INSTALLATION POSITION OF THE DRYER The dryer should be placed in a ventilated area with a gap of at least 10cm between the rear of the unit and the wall. It is advisable to leave a space of at least 1.5 metres in front of the appliance. Do not restrict the ventilation. 7 Side anel Switch Power plug Flexible duct >10cm

****** Page 8 ****** ADJUSTING THE FEET Once the dryer is in its permanent position it should be checked to ensure it both level and stable. Using a spirit level the feed should be adjusted. NOTES REGARDING POSITIONING • The appliance must be installed indoors. Do not install in a position where is may be exposed to rain or excessive moisture. Do not place the rear of the dryer close to curtains, or anything that could be caught by wind. Do not place the dryer near gas appliances or close to anything flammable. FITTING THE VENT PIPE Attach the vent pipe to the rear of the appliance using the adaptor pre fitted to the vent pipe. Route the pipe so the opposite end will expel the hot air outside. Where possible bends to the pipework should be minimized. 8

****** Page 9 ****** OPERATION QUICK START Before use ensure the appliance is correctly installed, and there are no signs of damage. II Plug In Load Clothes Choose Turn On Function* Close the door Start If no function is selectea, Ine appliance will start with the default settings DRYING LABELS Dry Lined / han to d O Dry clean Normal Drip dry n Do not tumble dry Dry flat Dry clean Do not d In the shade Dry clean with petroleum solvent only Do not dry clean with any solvent 9

****** Page 10 ****** BEFORE USE Ensure the laundry is thoroughly spun in the washing machine. This will reduce the drying time and reduce energy consumption. For best performance and uniform results, sort the laundry according to the fabric type and most appropriate drying program. Before drying, please ensure zips, hooks and eyelets, buttons and similar are fastened to prevent them catching during operation. Do not over dry clothes, because over dried clothes can become creased easily. Articles should be spun dried before placing in the dryer. Putting soaking items into the dryer may result in damage. Do not dry articles containing rubber or similar elastic materials. The door should only be opened only after the drying programme has finished to prevent scalding by hot steam or over heating the dryer. Clean the lint filter and empty the container after each use to avoid extending the drying time and increasing energy consumption. Do not put clothes into the dryer if they have been dry cleaned. Not suitable for silk or woolen textiles Do not overload the appliance. Please see below for approximate weights. 600 Mixed- fabric clothes 800g Single bedsheet Cotton Short sleeve shirt Cotton 180 Jacket Cotton 800g Work clothes 1120g Pants Cotton 70g 10 Jeans 800g Sleepwear 200g Socks mixed- weave 50g Towel quilt Cotton 900g Long sleeve shirt Cotton 300g

****** Page 11 ****** CONTROL PANEL o Cupboard Dry O Anti-Crease O Iron Dry Anti-Crease On/Off O Mix C) Cottona O Synthetic C) IHR On/Off Start/Pause Dryness Program Use to turn the appliance on and off. CHOOSE THE DESIRED PROGRAMME Press to choose between the 4 available Program functions: Mix, Cotton, S nthetic and 1 hour. CHOOSE THE EXTRA FEATURES REQUIRED Press to turn on / off the anti-crease function. Anti-Crease When activated the indicator light will be illuminated. Press to choose the level of dryness, between Dryness Iron Dry, Cupboard Dry and Extra Dry. START THE DRYING PROGRAM Press the Start / Pause button to start the Start / Pause Child Lock drying program. Press again to pause it. OTHER FEATURES Press and hold the Program and dryness buttons for 2 seconds to turn the child lock on / off. 11

****** Page 12 ****** The symbol indicates the “standard cotton program, which is the most appropriate to normal cotton garments at the rated load. Using the Cotton Program with the Dryness set to Extra is ideal for cotton laundry and is the most efficient in terms of energy consumption for drying wet cotton laundry. FOLLOWING USE Once the drying function has finished the appliance will bleep. Press the On/Off button and unplug the appliance. Remove the dried clothes from the appliance Clean the lint filter, cabinet and drum. DRYING PROGRAMMES TABLE Approximate Clothing Capacity amount of Type (KG) remaining humidity Program Cotton Cotton Cotton Mix Mix Synthetic Synthetic I Hr Dryness Level Extra Note Cotton Mix Synthetic Cotton 400/0 7/3.5/1 7/3.5/1 7/3.5 7/3.5/1 7/3.5/1 3.5/1 3.5/1 1 12 Cupboard Select the most suitable Iron program and Extra Dryness Cupboard Level based on the type Extra and quantity of foods to be Standard dried.

****** Page 13 ****** MAINTENANCE AND CARE CLEANING THE FILTER Clean the lint filter after each use. Remove by pulling straight up. To clean the filter wipe with a cloth to remove any lint which has accumulated. Allow the filter to dry before reinserting back into the appliance. CLEANING THE CABINET AND DRUM Use a soft damp cloth to wipe the cabinet and drum Do not directly rinse with water. Do not use scourers or scrapers Do not use alcohol, detergent or bleach wipes. After cleaning the drum, ensure the door is left open to allow the drum to dry naturaly. SAFETY CUT OUT This dryer has a safety cut out which is activated if the temperature is too high. If the unit cuts out, leave the appliance for at least 10 minutes to cool before pressing the rest button. (press until you hear it click, you may require a pencil or similar) The reset button is located on the rear of the appliance. •C 1 The cutout may operate for one of the following reasons which should be resolved before further use. The lint filter is blocked The exhaust outlet on the rear of the dryer is blocked. Poor ventilation in the room where the dryer is located. Lightweight article has been sucked over the filter. 13

****** Page 14 ****** TROUBLESHOOTING You may try to solve the following simple problems by yourself. If they cannot be solved, please contact the after-sales department. Problem Will not start External hot or burning smell Clothes are too dry Clothes shrink Hairball on clothes Noises while operating Air bumping Cause • Power cut. e The power plug is not plugged tight. • Appliance overloaded. • The safety cutout has activated • The lint filter is dirty. e The uptake or exhaust duct is dirty. • The machine is too full. • Clothes not removed after the program has finished. • The clothes aren’t sorted properly. e The drying temperature is too hi h. • Too dry. • It is normal for synthetic fibre and permanent press fibre to cause hairballs. This is due to rubbing while washing / d in • Wet clothes moving within the drum • Bumping of the drum due to steam expelled. 14 Solution • Check electricity supply. • Check the power socket, make sure the plug is correctly inserted. • Ensure there is not too much within the appliance • Press the reset button on the rear of the appliance. • Make sure the lint filter is clean. • Check to ensure the vent pipe is unobstructed. • Make sure the machine is not overloaded. • Take out the clothes immediately following completion f the program. • Observe the maintenance label on clothes. Observe the maintenance label on clothes. If prone to shrinking they should examine the clothing when dry. • Use the iron dry setting or remove the clothes early and then complete drying b han in until full d • Use fabric softener to lubricate the fibre. • Turn garments inside out to reduce rubbing. • This is normal. • This is normal

****** Page 15 ****** FAULT CODES Failure indication Iron and Cupboa rd LED’s flashing Extra LED flashing Description Temperature Sensor error Temperature Sensor error Reason Temperature Sensor is open or PCB fault Temperature Sensor is short or PCB fault Action by Dryer Current operation cancelled Current operation cancelled electriQ UK SUPPORT Call: 0333 043 6692 or complete the online form Office hours: 9AM 5PM Monday to Friday Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA DISPOSAL Do not dispose this product as unsorted waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centres. 15

****** Page 16 ****** PRODUCT FICHE Model Rated Ca acit D erT e Ener Efficienc Class Wei hted annual ener consum tion AEC Automatic or Non Automatic EU Ecolabel Ener consum tion of the standard cotton ro ramme at full load Energy consumption of the standard cotton programme at partial load Power Consum tion of the off-Mode Po Power Consum tion of the left-onMode Po Duration of the left-on mode Programme time of the ‘Standard Cotton Program” Weighted programme time of the Standard Cotton Program” at full and artial load Pro ramme time of the Standard Cotton Pro ram” at full load Pro ramme time of the ‘Standard Cotton Pro ram” at artial load Sound Power level for the ‘Standard Cotton Pro ram” at full load eiQFSTD7 7K Air-Vented c 451.6kWh* Automatic 3.81 kWh 2.05 kWh 0.46W 0.46W 10 min 90 min 120 min 68 min 69dB * Energy consumption per year is based on 160 drying cycles on the standard cotton programme at full and partial load, and the consumption of the low- power modes. Actual energy usage will depend on how the appliance is used. SPECIFICATION Dimensions Rated input power Rated Voltage Rated Frequency Weight Rated Capacity 555 x 595 x 840 mm 2000W 220 – 240V 50 Hz 33KG 7KG 16








Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.