Click here to download ELECTRIQ EIQ-32CVQ165VAFSGH (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** USER MANUAL electiiU 32″ FHD LED MONITOR eiQ-32CVQ165VAFSGH Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit to view our entire range of Intelligent Electricals


****** Page 3 ****** SAFETY INFORMATION Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and usage instructions should be followed. Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool. Clean only with a dry cloth. Do not use solvents or petroleum-based fluids. Do not block any ventilation openings. Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat. Do not tamper with the supplied plug. This plug is a BSI 363 standard plug. Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped. Please keep the unit in a well-ventilated environment. The monitor should only be connected to a mains power supply as rated on the back of the equipment. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on the cable as this may cause damage. When removing from a socket hold by the plug and not the wires. Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the unit does not work normally. Do not remove the safety covers. There are no user serviceable parts 3

****** Page 4 ****** inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible. WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire. Although every effort is made to maintain the accuracy of the manual, due to continuous product development, some variation from the manual is possible. The availability of features and settings may vary depending on the input source and method of connection. Although every effort is made to maintain the accuracy of the manual, due to continuous product development, some variation from the manual is possible. The availability of features and settings may vary depending on the input source and method of connection. The available resolutions and refresh rates may be limited by the capabilities and/or settings of the source device. AT FULL VOLUME. PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING. This warning sign is to warn of dangerous voltage inside the product. CAUTION; To reduce the risk of electric shock, DO NOT remove the cover (or back). NO user serviceable parts inside. Refer servicing to qualified service personnel. 4 This warning sign is to alert you Of important instructions accompanying the product.


****** Page 6 ****** CONNECTIONS AVAILABLE ON THE MONITOR oc 12V DPI HDMI 1 HOM12 DP2 AUDIO OUT 1. 2. 3. 4. 5. 6. PONER DPI (Display Port 1. HDMI 2.0 (HDMI 2.0, HDMI 1.4 (HDMI 1.4, DP2 (Display Port 2. AUDIO OUT 165Hz, Free Sync) 144Hz, Free Sync) 75hz, Free Sync) 165Hz, Free Sync) WALL MOUNTING The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied). The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied) • Do not use screws longer than specified or damage will occur to the internal components. NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation. GETTING STARTED MONITOR CONTROLS E M •o ooo Power Button Power Light OSD Control Buttons Select signal source or Exit the menu Go Up within the Main Menu or increase the value of the selected item Go Down within the Main Menu or decrease the value of the selected item Enter the Main OSD Menu and Select submenu Turn the monitor on or Off 6

****** Page 7 ****** SHORTCUT BUTTONS The monitor includes one touch options to access common settings. Display the signal source menu. Use the buttons to navigate and the M button to select the source. Activate the Line of Sight feature. Press again to cycle between the colours or turn off. Activate the ECO Mode feature. Press again to cycle through the presets. INITIAL SETUP Connect the monitor to a power socket. 1. Press the POWER button on the monitor or to turn it on (The indicator will be blue). 2. Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected. 3. To change between inputs, press the E button to enter the source menu. Use the <and buttons to choose the input source between DPI, HDMI 1, HDM12 and DP2. DPI HDMII HDM12 DP2 MENU OPTIONS The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is separated into the following sub menus: Input source, Brightness/Contrast, Colour Settings, Picture Quality Settings, Display, Audio, OSD (On screen display), and other. Details of each menu can be found in the following section. 7 ****** Page 8 ****** OSD MENU INPUT SOURCE MCO DPI HDMII HDM12 OP2 Game Adlust Cojor Adlust Setup Adore Signal Switch the signal input or select the source. DPI, 2, HDMI 1 , HDM12 COLOR SETTINGS Manual 11m. Mode Contrast/gri$tness Color Temperature Color Range HDR GAMERJ Color Ail Au:lio Adjust o Setup 1 2360X1aUO@16SHt Brightness Contrast I-IDR Colour Temperature Adjust the brightness of the display between 0 and 100. Adjust the contrast of the display between 0 and 100. The HDR is divided into, Auto (HDMI), I-IDR Effect Change the Colour Temperature of the display to Normal, Warm, Cool or User. When the User Mode is selected, the Red, Green, and Blue values can be adjusted independently between 0 and 100. ****** Page 9 ****** MANUAL IMAGE ADJUST Aspect Ratio Sharpness Blue light filter Advanced DCR Response time Adaptive sync MPRT AUDIO Mute Volume anu,al Inu AdJuq Sharpness Blue Light Filter Aspect Ratio Advanced DCR Response Time Adaptive-Sync MPRT in ut Adjust Ad just o Setup Menu 2S.60X1440@16SHZ Change the image aspect ratio to Wide Screen, Auto. Change the clarity from 0 to 100. Change the display blue light from 0 to 100. Turn the Dynamic Contrast Ratio Feature On or Off. Turn the Response Time feature On or Off. Turn the Adaptive-Sync feature On or Off. Turn the MPRT feature On or Off. C Obi W)de Volume Mute Ad just Audio Adjust In ut setup Turn On and Off to mute and unmute the audio output. Adjust the output volume between 0 and 100. 9 ****** Page 10 ****** SETUP MENU Language Resolution Notice Information OSD Size OSD Timeout OSD Back round Auto Power Off Slee Auto Detect Memory Recall Adjust Language Select Resdudon Notice Inf Ormation OSO Size OSO Timeout OSO Background Auto Power Off Sleep Auto Detect Memory Reca II GAMtRt Adjust Input Sek€t Mena Change the OSD Menu display language between English, Chinese, Korean, Russian, S anish, Ja anese and French. Turn the Resolution Notice feature On or Off. Resolution:1920×1080 Horizontal frequency: 137.36KHz Vertical frequency: 120.0Hz Clock frequency:285.5MHz. Menu shows bud et, lar e. Chan e the OSD Timeout from 0 to 100. Turn the OSD Back round feature On or Off. Turn the Auto Power Off feature On or Off. Slee time is off. Turn the Auto Detect feature On or Off. Restore factory default setting. 10 ****** Page 11 ****** OTHER Standard Game Movie Web Text Mocte M anual Adjust Adjust Adjust Standard Game Movie Web Text Game Enter standard mode. Setup 2360X14400t63Hz The game mode is divided into FPSI, Gamer 1, Gamer2, Gamer3. Enter movie mode. Enter Web mode. Enter text mode. 11 PFS2, RTS, Night, Vision, ****** Page 12 ****** SPECIFICATION Panel Type Panel Dimensions Case Type Best Resolution Active Display Area Pixel Pitch Contrast Ratio Brightness Response Time Viewing Angle Display Colours Video Compatibility Aspect Ratio Speaker Multimedia S eakers Sound Demodulation Operating Humidity Operating Temperature Video Interface Audio Interface Safety & EMC Certification Stand Type Button Position Power Input Power Consumption eiQ-32CVQ165VAFSGH 32" (16:9) LED Backlit Monitor 800. Imm Diagonal Plastic 3000:1 Typical 300 cd/m2 5ms (GTG) 1780/1780 CR210 16.7M Mufti-Standard for NTSC / PAL 16:9 2x3W Stereo. Audio 200/0-700/0 -10 to 500C IN/OUT INTERFACE HDMIx2, DPx2 Audio out xl CE/FCC/ROHS Desktop Right Hand Side DC 12V 5A s48W 12 ****** Page 13 ****** TROUBLESHOOTING Problem No power No picture Buttons on the monitor don't do anything Noise or other interference Solution Insert the plug securely into the power outlet. Ensure that the equipment is connected properly. Ensure the correct input is selected. Disconnect the power plug and then reconnect it. (The unit may not be operating properly due to lightning, static, or other factors.) Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment. ENVIRONMENTAL PROTECTION Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centers electriQ UK SUPPORT Call: 0871 620 1057 Office hours: 9AM – 5PM Monday to Friday Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA 13








Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.